bkpADS
bkpADS provides an Interface between Beckhoff PLCs and a BK Precision 891 LCR meter which communicates via the bkp891 library.
Configuration
bkpADS takes up to two commandline options:
--plc_id TEXT ADS Id of PLC [default: 127.0.0.1.1.1]
-c, --com TEXT Port to use for serial device communication. COMx on Windows
[required]
The variables to communicate with the PLC are
GVL.bMeas_start |
The variable name of the flag for activation of a measurement in PLC
GVL
GVL.sMeas_type |
The variable name of the measurement type in PLC GVL - set by PLC
GVL.rMeas_01, GVL.rMeas_02 |
The variable names for the measurement results in PLC GVL - set by the
Script (most measurements return 2 values)
GVL.bMeas_ready |
The variable name of the flag to show completion of measurement
GVL.bMeas_error |
The variable name of the flag signifying an error occurred
GVL.sMeas_errormsg |
The variable name which holds the error message in PLC
The names are configured in settings.py, which you can find in the installation directory.
Type pip show bkpads in a terminal to locate the directory.
Usage
Important: bkpADS expects the PLC to be in Run Mode before it is started. If you want to test different command line parameters, make sure that the PLC is running before you start bkpADS.
To start bkpADS from the PLC, use NT_StartProcess,
which needs the TC2_Utilities Library enabled on the PLC. See the following example
PLC code:
PROGRAM MAIN
VAR
bStartscript : BOOL := TRUE;
bBusy : BOOL := FALSE;
Start_py_script : NT_StartProcess;
END_VAR
IF bStartscript = TRUE AND bBusy = FALSE THEN
Start_py_script(
NETID := '',
PATHSTR := 'bkpads',
DIRNAME := 'C:\Users\Administrator\Desktop',
COMNDLINE := '-c COM4',
START := TRUE,
BUSY => bBusy
);
bStartscript := FALSE;
END_IF
Edit the COMNDLINE parameter to match the serial port of your device.