mcer12 / GxEPD_HINKE029A10_plugin

GxEPD plugin that adds support for HINK-E029A10-A1 3-color e-paper display

GxEPD HINK-E029A10 arduino plugin

!!! This display is now natively supported by GxEPD2 (GxEPD2_290_C90c) so I suggest to migrate to that. !!!

This small Arduino library adds support for 2.9" HINK-E029A10-A1 display to GxEPD library. It is a 3-color display with SSD1675A driver.

This plugin doesn't support partial update atm, other than that it should work. PRs are welcome.

https://github.com/ZinggJM/GxEPD

Installation

1. copy the repository to your Arduino/libraries folder
2. add "#include <GxEPD_HINKE029A10.h>" after "#include <GxEPD.h>"
3. And done. You can try it out with example attached in the repository.

Notes

On ESP8266 I suggest to map CS pin to GPIO5 / D1 in order for the device to boot up correctly

Based mostly on these projects:

• https://github.com/drewler/epd
• https://github.com/atc1441/GxEPD