mbuesch / pyprofibus

PROFIBUS-DP stack

https://bues.ch/a/profibus

mbuesch/pyprofibus Issues

[Question] how to read data without write ?
Updated 10 months ago12
GSD file reading error.
Updated a year ago1
How to get to debugMsg to prompt them in Tkinker window
Closed a year ago1
Is there any communication function between the master station and the master station in this project?
Updated a year ago1
After slave was reset/reloaded timeout occurs and slave-object changes its state to STATE_INIT, but its fcb remained in previous state ( fcv=1 fcb=0/1 )
Closed a year ago1
Сonnection SIEMENS et200s
Updated 2 years ago4
connecting Pyprofibus with DP/PA coupler to communcate with PA devices (Invalid telegram format)
Closed 2 years ago4
Help with WAGO 750-343
Closed 2 years ago7
TxDen pin Question
Closed 2 years ago4
pyprofibus hardware documentation
Closed 2 years ago3
Siemens DP/AS-i LINK 20 support
Closed 3 years ago4
How to start with real hardware and GSD file?
Closed 3 years ago12
Festo CPV Valve terminal
Closed 3 years ago40
PC - FPGA interface
Closed 3 years ago2
"input byte, "output byte" confusion
Closed 3 years ago6
CP5711: Is this CP supported?
Closed 3 years ago3
Warning in GSD: User_Prm_Data truncated by User_Prm_Data_Len
Closed 3 years ago9
Function code response error handling needs improvement
Updated 3 years ago3
Modules are sorted lexicographically, not numerically
Closed 3 years ago1
Acyclic communcation support
Updated 3 years ago1
Terminating: GSD 'HIL_0B69.gsd': DPv1 User_Prm_Data is shorter than 3 bytes
Updated 4 years ago13
Standalone Profibus slave with communication through virtual serial ports.
Updated 4 years ago3
Getting telegram error
Closed 5 years ago3
Modular_Station=0: Wait for Data_Exchange-ready won't proceed to Data Exchange stage
Closed 5 years ago13
Broken link for hardware description
Closed 5 years ago2
Working over Ethernet
Closed 6 years ago2
No module named 'pyprofibus.gsd'
Closed 8 years ago2