lein-cljsbuild

####Latest version:

This is a Leiningen plugin that makes it quick and easy to automatically compile your ClojureScript code into Javascript whenever you modify it. It's simple to install and allows you to configure the ClojureScript compiler from within your project.clj file.

Beyond basic compiler support, lein-cljsbuild can optionally help with a few other things:

[Launching REPLs for interactive development] (https://github.com/emezeske/lein-cljsbuild/blob/1.1.3/doc/REPL.md)
[Launching ClojureScript tests] (https://github.com/emezeske/lein-cljsbuild/blob/1.1.3/doc/TESTING.md)

The latest version of lein-cljsbuild is 1.1.3. See the release notes here.

Note that cljsbuild crossovers are deprecated, and will be removed eventually. You should never use them. Please use either reader conditionals (available in Clojure >= 1.7.0-beta2 and ClojureScript >= 0.0-3255), or cljx to target both Clojure and ClojureScript from the same codebase.

If you are using ClojureScript >= 1.7.170 you need to use a lein-cljsbuild version >= 1.1.1.

Requirements

The lein-cljsbuild plugin works with [Leiningen] (https://github.com/technomancy/leiningen/blob/master/README.md) version 2.1.2 or higher.

Installation

You can install the plugin by adding lein-cljsbuild to your project.clj file in the :plugins section:

(defproject lein-cljsbuild-example "1.2.3"
  :plugins [[lein-cljsbuild "1.1.3"]])

In addition, you should add an explicit ClojureScript dependency to your project, like this:

:dependencies [[org.clojure/clojurescript "0.0-XXXX"]]

lein-cljsbuild will add a dependency to your project if it doesn't already contain one, but that functionality will not remain for long. The latest version of lein-cljsbuild currently requires a minimum of ClojureScript 0.0-3211.

Just Give Me a Damned Example Already!

See the [example-projects] (https://github.com/emezeske/lein-cljsbuild/blob/1.1.3/example-projects) directory for a couple of simple examples of how to use lein-cljsbuild. The [simple project] (https://github.com/emezeske/lein-cljsbuild/blob/1.1.3/example-projects/simple) shows a dead-simple "compile only" configuration, which is a good place to start. The [advanced project] (https://github.com/emezeske/lein-cljsbuild/blob/1.1.3/example-projects/advanced) contains examples of how to use the extended features of the plugin.

Also, see the [sample.project.clj] (https://github.com/emezeske/lein-cljsbuild/blob/1.1.3/sample.project.clj) file for an exhaustive list of all options supported by lein-cljsbuild.

Basic Configuration

The lein-cljsbuild configuration is specified under the :cljsbuild section of your project.clj file. A simple project might look like this:

(defproject lein-cljsbuild-example "1.2.3"
  :plugins [[lein-cljsbuild "1.1.3"]]
  :cljsbuild {
    :builds [{
        ; The path to the top-level ClojureScript source directory:
        :source-paths ["src-cljs"]
        ; The standard ClojureScript compiler options:
        ; (See the ClojureScript compiler documentation for details.)
        :compiler {
          :output-to "war/javascripts/main.js"  ; default: target/cljsbuild-main.js
          :optimizations :whitespace
          :pretty-print true}}]})

For an exhaustive list of the configuration options supported by lein-cljsbuild, see the [sample.project.clj] (https://github.com/emezeske/lein-cljsbuild/blob/1.1.3/sample.project.clj) file.

Basic Usage

Once the plugin is installed, you can build the ClojureScript once:

$ lein cljsbuild once

Or you can have lein-cljsbuild watch your source files for changes and automatically rebuild them. This is recommended for development, as it avoids the time-consuming JVM startup for each build:

$ lein cljsbuild auto

Assuming you have configured cljsbuild to emit compiler output to one of Leiningen's :clean-targets (which includes ./target by default), running lein clean will delete all of the JavaScript and ClojureScript files that lein-cljsbuild generates during compilation.

Color-coded output on Windows

Colors are a big deal when reading ClojureScript compiler output, but Windows consoles don't support ANSI color codes. This limitation is commonly corrected by installing ANSICON:

Download and unzip ANSICON anywhere.
Open a command prompt (Run as administrator).
Navigate to the unzipped folder.
cd x86 or x64 (depending on whether you have 32-bit or 64-bit machine, respectively)
Run ansicon -i to install.

Afterwards, you should get colored output from all future console sessions that use ANSI color codes.

Hooks

Some common lein-cljsbuild tasks can hook into the main Leiningen tasks to enable ClojureScript support in each of them. The following tasks are supported:

$ lein compile
$ lein test
$ lein jar

To enable ClojureScript support for these tasks, add the following entry to your project configuration:

:hooks [leiningen.cljsbuild]

Note that by default the lein jar task does not package your ClojureScript code in the JAR file. This feature needs to be explicitly enabled by adding the following entry to each of the :builds that you want included in the JAR file. lein uberjar derives its behavior from lein jar and will include the ClojureScript as well if enabled.

:jar true

Debug Note: There is a known issue (#366) where the lein uberjar task fails to build when using hooks and a cljsbuild configuration within an :uberjar profile. Instead of hooks, you can use :prep-tasks as an alternative:
:prep-tasks ["compile" ["cljsbuild" "once"]]

Multiple Build Configurations

If the :builds sequence contains more than one map lein-cljsbuild will treat each map as a separate ClojureScript compiler configuration, and will build all of them in parallel:

(defproject lein-cljsbuild-example "1.2.3"
  :plugins [[lein-cljsbuild "1.1.3"]]
  :cljsbuild {
    :builds [
      {:source-paths ["src-cljs-main"]
       :compiler {:output-to "main.js"}}
      {:source-paths ["src-cljs-other"]
       :compiler {:output-to "other.js"}}]})

This is extremely convenient for doing library development in ClojureScript. This allows cljsbuild to compile in all four optimization levels at once, for easier testing, or to compile a test suite alongside the library code.

You can optionally assign an ID to a build configuration and build only that one:

(defproject lein-cljsbuild-example "1.2.3"
  :plugins [[lein-cljsbuild "1.1.3"]]
  :cljsbuild {
    :builds [
      {:source-paths ["src-cljs-main"]
       :compiler {:output-to "main.js"}}
      {:id "other"
       :source-paths ["src-cljs-other"]
       :compiler {:output-to "other.js"}}]})

$ lein cljsbuild auto other

If you want IDs for all of your build configurations, you can specify them as a map instead of a vector:

(defproject lein-cljsbuild-example "1.2.3"
  :plugins [[lein-cljsbuild "1.1.3"]]
  :cljsbuild {
    :builds {
      :main
      {:source-paths ["src-cljs-main"]
       :compiler {:output-to "main.js"}}
      :other
      {:source-paths ["src-cljs-other"]
       :compiler {:output-to "other.js"}}}})

You can also build multiple configurations at once:

$ lein cljsbuild auto main other

See the [example-projects/advanced] (https://github.com/emezeske/lein-cljsbuild/blob/1.1.3/example-projects/advanced) directory for a working example of a project that uses this feature.

REPL Support

Lein-cljsbuild has built-in support for launching ClojureScript REPLs in a variety of ways. See the [REPL documentation] (https://github.com/emezeske/lein-cljsbuild/blob/1.1.3/doc/REPL.md) for more details.

Testing Support

Lein-cljsbuild has built-in support for running external ClojureScript test processes. See the [testing documentation] (https://github.com/emezeske/lein-cljsbuild/blob/1.1.3/doc/TESTING.md) for more details.

Extended Configuration

Custom warning handlers

You can place custom warning handlers for the ClojureScript compiler under the :warning-handlers key. The value should be a vector of either 1.) fully-qualified symbols that resolve to your custom handler, or 2.) anonymous functions that will get eval'd at project build-time.

(defproject lein-cljsbuild-example "1.2.3"
  :plugins [[lein-cljsbuild "1.0.4"]]
  :cljsbuild {
    :builds {:id           "example"
             :compiler     {}
             :warning-handlers [my.ns/custom-warning-handler ;; Fully-qualified symbol
                                ;; Custom function (to be evaluated at project build-time)
                                (fn [warning-type env extra]
                                  (when-let [s (cljs.analyzer/error-message warning-type extra)]
                                    (binding [*out* *err*]
                                      (cljs.analyzer/message env s))))]}})

ClojureScript Version

After configuring lein-cljsbuild, lein deps will fetch a known-good version of the ClojureScript compiler. You can use a different version of the compiler via a local clone of the ClojureScript git repository. See the wiki for details.

License

Contributors

A big thank you to all contributors who help to make this project better.

matsu911 / lein-cljsbuild