matejzero / check_jbod

Nagios script to check the status and fault in Xyratex JBOD.

check_jbod.py

This tool is used to monitor Xyratex JBOD, also known as:

• Seagate/Xyratex SP-2584
• Seagate/Xyratex SP-3584
• Seagate Exos E 4U106
• Dell MD1420
• Lenovo D1212

These JBODs are probably also supported with some slight modifications:

• Dell MD1280
• Lenovo D3284

Requirements

• sg_ses

Usage

This script is intended to be used with NRPE. The device ID is the number on the LCD screen or set via the CLI on the Exos 4U106.

usage: check_jbod.py [-h] [-v] [--fan] [--volt] [--current] [--psu_status]
                     [--temp]
                     device

Monitor Fans, PSU and temperature in a Xyratex JBOD

positional arguments:
  device         JBOD ID to check

optional arguments:
  -h, --help     show this help message and exit
  -v, --verbose  increase output verbosity
  --fan          Check fan
  --volt         Check voltage
  --current      Check current
  --psu_status   PSU status
  --temp         Check temperatures based on internal thresholds