mariopesch / senseBoxMCU-core

This repository will handle the senseBox MCU board support package.

senseBox MCU

senseBox MCU is a Microchip SAMD21 based open-source board for sensors.

• Microchip ATSAMD21 ARM Cortex-M0+ Microcontroller
• Microchip ATECC608A Crypto Authentication
• Bosch BMX055 Orientation Sensor (Accelerometer + Gyroscope + Magnetometer)
• USB CDC+MSC Bootloader (Arduino compatible)
• XBee compatible sockets (with UART and SPI)
• 5V tolerant IOs, UART, I2C (JST-PH connectors)
• MicroUSB connector for power and data
• Idle power consumption about 20mA (single 5V power supply)
• Open-Source
• Documentation on learn.watterott.com
• This repository is based on Watterott's Core Package

Library Versions

The senseBox MCU Core V.1.4.0 includes the following libraries:

Name	Version	Link
senseBox MCU Lib	1.4.1	https://github.com/sensebox/SenseBoxMCU-Lib
Sparkfun SCD 30 Library	1.0.12	https://github.com/sparkfun/SparkFun_SCD30_Arduino_Library
Adafruit GFX Library	1.2.3	https://github.com/adafruit/Adafruit-GFX-Library
Adafruit BME280 Library	2.1.2	https://github.com/adafruit/Adafruit_BME280_Library
Adafruit BMP280 Library	2.1.0	https://github.com/adafruit/Adafruit_BMP280_Library
Adafruit BME680 Library	1.1.1	https://github.com/adafruit/Adafruit_BME680
Adafruit_BMP3XX	2.0.1	https://github.com/adafruit/Adafruit_BMP3XX
Adafruit HDC1000	2.0.0	https://github.com/adafruit/Adafruit_HDC1000_Library
Adafruit BusIO	1.7.1	https://github.com/adafruit/Adafruit_BusIO
Adafruit NeoPixel Library	1.0.6	https://github.com/adafruit/Adafruit_NeoPixel
Adafruit_SSD1306	1.1.2	https://github.com/adafruit/Adafruit_SSD1306
Adafruit Unified Sensor Driver	1.0.2	https://github.com/adafruit/Adafruit_Sensor
Arduino Library for Maxim Temperature	3.8.0	https://github.com/milesburton/Arduino-Temperature-Control-Library
ArduinoBearSSL	1.5.0	https://github.com/arduino-libraries/ArduinoBearSSL
ArduinoECCX08	1.3.4	https://github.com/arduino-libraries/ArduinoECCX08
Ethernet Library	2.0.0	http://www.arduino.cc/en/Reference/Ethernet
FlashStorage library	0.7.1	https://github.com/cmaglie/FlashStorage
HDC100X
Arduino-LMIC library	1.5.1	https://github.com/matthijskooijman/arduino-lmic
LoRaMessage	3.0.1	https://github.com/thesolarnomad/lora-serialization
Makerblog_TSL45315
OneWire	2.3.4	http://www.pjrc.com/teensy/td_libs_OneWire.html
RV8523	1.0.0	https://github.com/watterott/Arduino-Libs/tree/master/RV8523
SDS011 library selectable	0.0.6	https://github.com/sensebox/SDS011-select-serial
SSD1306-Plot-Library	1.0.0	https://github.com/Lucas-Steinmann/SSD1306-Plot-Library
SenseBoxOTA	1.0.0	https://github.com/sensebox/senseBoxMCU-core
TinyGPSPlus	1.0.0	https://github.com/mikalhart/TinyGPSPlus
VEML6070	0.0.1
LTR329 (based on LTR303 lib)	0.1.0	https://github.com/automote/LTR303
WiFi101	0.16.1	http://www.arduino.cc/en/Reference/WiFi101
senseBox	1.0.0
senseBoxIO	1.0.0

Development & Preparing a new release

Please work in a separate branch and create a pull requests against the master branch!

Each pull request is validated through checks in CI by trying to install the current dev package and compiling against known sensor and model configurations.

Development

• Create a branch from master
• Do you work, change, add or delete stuff.
• Remember to update the arduino/samd.zip file. zip -r -X samd.zip samd
• After changing the arduino/samd.zip file, update the size and checksum properties in the package_sensebox-dev_index.json. (stat -c "%s" arduino/samd.zip or stat -f "%z" samd.zip and shasum -a 256 arduino/samd.zip)
• Commit & push
• If not already open, create a pull request

Preparing a new release

Once you're satisfied with the current state of the master branch:

• Create a new release
  • Attach the current arduino/samd.zip
• Create a new branch
  • Update the package_sensebox_index.json
  • Prepend a new entry in the packages.platforms array
  • Use the version and url from your release above
  • Commit & push
• Create a PR and merge into master
• If everything was okay, no errors in CI should emerge