A simple radio controlled Car with 2 calliope mini
Use Calliope 1 to controll the 2 DC Motors. Calliope 2 will interact as a wirelles controller for the car. It will use the Data from the build-in accelerometer converts it into a signal for the 2 Motor which are conected to calliope 1. The actual driving direction is displayed via a pixel on the LED Matrix of the controller.
Programmed with the PXT Editor. Simple open the .hex files on mini.pxt.io (rev0.3) or on pxt.calliope.cc (rev1.0) to see the blocks