HFS: HTTP File Server

Introduction

HFS is the best way via web to access or share files from your disk.

It's a server software, share files fresh from your disk. Don't rely on services, be independent!
It's all very fast. Try download zipping 100GB, it starts immediately!
Easy to use. HFS tries to detect problems and suggest solutions.
Share even a single file with our virtual file system, even with a different name, all without touching the real file. Present things the way you want!
Watch all activities in real-time.
Control bandwidth, decide how much to give.

This project is in an early stage, few things are missing, but it already rocks!

This is a full rewrite of the Delphi version. You won't find all previous features here (yet), but still we got:

How does it work

run HFS on your computer, configuration page automatically shows up
select what files and folders you want to be accessible
possibly create accounts and limit access to files
access those files from a phone or another computer just using a browser

Features

https
unicode
virtual file system
mobile friendly front-end
search
accounts
resumable downloads
resumable uploads
download folders as zip archive
simple website serving
plug-ins
log file
speed throttler
admin web interface
virtual hosting (plug-in)
anti-brute-force (plug-in)

Installation

go to https://github.com/rejetto/hfs/releases
click on Assets
download the right version for your computer
launch hfs file
the browser should automatically open on localhost address, so you can configure the rest in the Admin-panel.
- if a browser cannot be opened on the computer where you are installing HFS, you should enter this command in HFS console: create-admin <PASSWORD>

If you access Admin-panel via localhost, by default HFS won't require you to login. If you don't like this behavior, disable it in the Admin-panel or enter this console command config localhost_admin false.

Other systems

If your system is not Windows/Linux/Mac, you can try this alternative version:

install node.js
execute: sudo npm -g i hfs
launch: hfs

Configuration and other files will be stored in %HOME%/.vfs

With this installation method, you can update with sudo npm -g update hfs .

Service

If you want to run HFS as a service

if you installed with npm on Windows
- service installation
  - run npx qckwinsvc2 install name="HFS" description="HFS" path="%APPDATA%\npm\node_modules\hfs\src\index.js" args="--cwd %HOMEPATH%\.hfs" now
- service update
  - run npx qckwinsvc2 uninstall name="HFS"
  - run npm -g update hfs
  - run the service installation again

Plug-ins

To install a plugin you just copy its folder inside plugins folder.

Delete it to uninstall.

HFS will ignore all folders with -disabled at the end of the name.

Why you should upgrade from HFS 2.x to 3

As you can see from the list of features, we already have some goods that you cannot find in HFS 2. Other than that, you can also consider:

it's more robust: it was designed to be an always-running server, while HFS 1-2 was designed for occasional usage (transfer and quit)
passwords are never really stored, just a non-reversible hash is
faster search (up to 12x)
more flexible permissions

But you may still want to stay with HFS 2.x (so far) for the following reasons

smaller
more tested
classic window interface (can be easier for some people)

Console commands

If you have access to HFS' console, you can enter commands. Start with help to have a full list.

Configuration

Configuration can be done in several ways

accessing the Admin-panel with your browser
- it will automatically open when you start HFS. Bookmark it. if your port is 8000 the address will be http://localhost:8000/~/admin
after HFS has started you can enter console command in the form config NAME VALUE
passing via command line at start in the form --NAME VALUE
directly editing the config.yaml file. As soon as you save it is reloaded and changes are applied

NAME stands for the property name that you want to change. See the complete list below.

Where is it stored

Configuration is stored in the file config.yaml, which is stored in the same folder of hfs.exe if you are using this kind of distribution on Windows, or USER_FOLDER/.hfs on other systems.

You can decide a different file and location by passing --config SOME_FILE at command line, or inside an env called HFS_CONFIG. Any relative path provided is relative to the cwd.

Configuration properties

port where to accept http connections. Default is 80.
vfs the files and folders you want to expose. For details see the dedicated following section.
log path of the log file. Default is access.log.
log_rotation frequency of log rotation. Accepted values are daily, weekly, monthly, or empty string to disable. Default is weekly.
error_log path of the log file for errors. Default is error.log.
errors_in_main_log if you want to use a single file for both kind of entries. Default is false.
accounts list of accounts. For details see the dedicated following section.
mime command what mime-type to be returned with some files. E.g.: "*.jpg": image/jpeg You can specify multiple entries, or separate multiple file masks with a p|pe. You can use the special value auto to attempt automatic detection.
max_kbps throttle output speed. Default is Infinity.
max_kbps_per_ip throttle output speed on a per-ip basis. Default is Infinity.
zip_calculate_size_for_seconds how long should we wait before the zip archive starts streaming, trying to understand its finale size. Default is 1.
open_browser_at_start should HFS open browser on localhost on start? Default is true.
https_port listen on a specific port. Default is 443.
cert use this file for https certificate. Minimum to start https is to give a cert and a private_key. Default is none.
private_key use this file for https private key. Default is none.
allowed_referer you can decide what domains can link to your files. Wildcards supported. Default is any.
block a list of rules that will block connections. E.g.:
```
block:
  - ip: 192.168.0.90
```
Syntax supports, other than simple address, * as wildcard and CIDR format.
plugins_config this is a generic place where you can find/put configuration for each plugin, at least those that need configuration.
enable_plugins if a plugin is not present here, it won't run. Defaults is [ antibrute ].
custom_header provide HTML code to be put at the top of your Frontend. Default is none.
localhost_admin should Admin be accessed without credentials when on localhost. Default is true.
proxies number of proxies between server and clients to be trusted about providing clients' IP addresses. Default is 0.
keep_unfinished_uploads should unfinished uploads be deleted immediately when interrupted. Default is true.

Virtual File System (VFS)

The virtual file system is a tree of files and folders, collectively called nodes. By default, a node is a folder, unless you provide for it a source that's a file. Valid keys in a node are:

name: this is the name we'll use to display this file/folder. If not provided, HFS will infer it from the source. At least name or source must be provided.
source: absolute or relative path of where to get the content
children: just for folders, specify its virtual children. Value is a list and its entries are nodes.
rename: similar to name, but it's from the parent node point. Use this to change the name of entries that are read from the source, not listed in the VFS. Value is a dictionary, where the key is the original name.
mime: specify what mime to use for this resource. Use "auto" for automatic detection.
default: to be used with a folder where you want to serve a default html. E.g.: "index.html". Using this will make mime default to "auto".
can_read: specify who can download this entry. Value is a WhoCan descriptor, which is one of these values
- true: anyone can, even people who didn't log in. This is normally the default value.
- false: no one can.
- "*": any account can, i.e. anyone who logged in.
- [ frank, peter ]: the list of accounts who can.
can_see: specify who can see this entry. Even if a user can download you can still make the file not appear in the list.
can_upload specify who can upload. Applies to folders with a source. Default is none. Remember that to see in the list you must also be able to download, or else you won't see it anyway. Value is a WhoCan descriptor, refer above.
masks: maps a file mask to a set of properties as the one documented in this section. E.g.
```
masks:
  "**/*.mp3":
    can_read: false
  "*.jpg|*.png": 
    mime: auto
```

Permissions set on an inner element will override inherited permissions. This means that you can restrict access to folder1, and yet decide to give free access to folder1/subfolder2.

Accounts

All accounts go under accounts: property, as a dictionary where the key is the username. E.g.

accounts:
    admin:
        password: hello123
        belongs: group1
    guest:
        password: guest
    group1:

As soon as the config is read HFS will encrypt passwords (if necessary) in a non-reversible way. It means that password property is replaced with an encrypted property: srp.

As you can see in the example, group1 has no password. This implies that you cannot log in as group1, but still group1 exists and its purpose is to gather multiple accounts and refer to them collectively as group1, so you can quickly share powers among several accounts.

For each account entries, this is the list of properties you can have:

ignore_limits to ignore speed limits. Default is false.
redirect provide a URL if you want the user to be redirected upon login. Default is none.
admin set true if you want to let this account log in to the Admin-panel. Default is false.
belongs an array of usernames of other accounts from which to inherit their permissions. Default is none.

License

GPLv3

maomaoz-bin / hfs