Yes. This repository isn't main line.
- Mixed Dvorak and JIS keyboard layout config.
- Fan made case data. Format only
*.svgand made with Inkscape on Ubuntu.- "SeventhSky" is very good game; It made by "TANAKA U" with Flash .
- Many and nested clones... But, It is edited to be pleasant to the touch.
Create case on fabric space about SHARE Garage's RayjetCNC:
Order send from "Adobe Illustrator CS6". Checking under bullets on SVG file:
- Strokes bold of cut order: 0.001mm
- Can use "clipping" for curving
2019/5/5 にファームウェアをアップデートしました。
それ以前にハードウェアを作製されていた方はアップデートの必要はありませんが、
アップデートした方はビルドガイドの最終項を参照してください。
The firmware has been updated to 5/5/2019.
If you have previously created hardware, you do not need to update, but if you have updated, please refer to the last section of the build guide.
ErgoDash PCB
× 2
ErgoDash Case
× 2
Switch (MX-compatible and Alps switches are supported) × 66-70
Keycap × 66-70
1N4148 diode × 66-70
Arduino Pro Micro × 2
TRRS jack MJ-4PP-9 × 2
MJTP1117 switch × 2
TRRS cable × 1
Micro USB cable × 1
M2×5mm screw × 22
M2×8mm screw × 6
M2×6mm spacer × 14
Rubber feet × 8
---Option---
LED WS2812B × 24
LED 3mm × 66-70
470Ω resistor × 66-70
1kΩ resistor × 2
NchMOSFET IRLML6344TRPbF × 2
The ErgoDash uses QMK for its firmware, and the code for it is here: QMK - ErgoDash directory .