MCA ROLL NO :- 16155 Name :- Manoj Devidas Sonje
To Show Name and Roll Number on booting screen from bootsector of secondary device. follow instructions.
1 - first step is to make iso image of bootcode i.e- bootloader run below command in terminal
nasm -f bin bootloader.asm -o bootloader.iso
we can also make bootloader.img by above command just by replacing bootloader.iso by bootloader.img
2 - to check our iso is correct we should run bootloader.iso with help of qemu(vertual machine). to check iso first ensure that qemu-system-x86_64 is installed .
3 -A] run below command to test our bootloader
qemu-system-x86_64 bootloader.iso
after running above command you will get screen shown above
B]also we can use seconadary device to do this – first of all make secondary device bootable.
```
sudo umount /dev/sdX
sudo dd if=/path/to/boot.iso of=/dev/sdX bs=4M && sync
```
where sdX is your usb device (this can be verified with lsblk). The sync bit is important as dd can return before the write operation finishes.