mampfes / ha_epex_spot_sensor

Provides helper sensors for EPEX Spot integration.

EPEX Spot Sensor

This component is an addition to the EPEX Spot integration.

EPEX Spot Sensor add one or more binary sensors which can be configured to turn on at the cheapest or most expensive time interval of the day. The length of the time interval can be configured, as well as whether the interval shall be used contiguously or intermittently.

If you like this component, please give it a star on github.

Installation

1. Ensure that HACS is installed.

2. Open HACS, then select Integrations.

3. Select ⋮ and then Custom repositories.

4. Set Repository to https://github.com/mampfes/ha_epex_spot_sensor
   and Category to Integration.

5. Install EPEX Spot Sensor integration via HACS:

   

   If the button doesn't work: Open HACS > Integrations > Explore & Download Repositories and select integration EPEX Spot Sensor.

6. Add helper(s) provided by EPEX Spot Sensor to Home Assistant:

   

   If the button doesn't work: Open Settings > Devices & services > Helpers > Create Helper and select EPEX Spot Sensor.

In case you would like to install manually:

1. Copy the folder custom_components/epex_spot_sensor to custom_components in your Home Assistant config folder.

2. Add helper(s) provided by EPEX Spot Sensor to Home Assistant:

   

   If the button doesn't work: Open Settings > Devices & services > Helpers > Create Helper and select EPEX Spot Sensor.

Configuration Options

1. Earliest Start Time
   Earliest time to start the appliance.

2. Latest End Time
   Latest time to end the appliance. Set it to same value as earliest start time to cover 24h. If set to smaller value than earliest start time, it automatically refers to following day.

3. Duration
   Required duration to complete the appliance.

4. Remaining Duration Entity
   Optional entity which indicates the remaining duration. If entity is set, it replaces the static duration. If the state of the Remaining Duration Entity changes between Earliest Start Time and Latest End Time, the configured Earliest Start Time will be ignore and the latest change time of the Remaining Duration Entity will the used instead.

5. Price Mode
   Selects whether the sensor shall react on the cheapest or the most expensive prices between Earliest Start Time and Latest End Time.

6. Interval Mode
   Selects whether the specified duration shall be completed in a single, contiguous interval or can be split into multiple, not contiguous intervals (intermittend).

Sensor Attributes

1. Earliest Start Time
   Reflects the configured Earliest Start Time.

2. Latest End Time
   Reflects the configured Latest End Time.

3. Duration
   Reflects the used value for duration, which is either the configured duration if the Remaining Duration Entity is not set; or the state of the Remaining Duration Entity.

4. Remaining Duration Entity
   Optional entity which indicates the remaining duration. If entity is set, it replaces the static duration.

5. Interval Start Time Reflects the actual start time of the interval, which is either the configured Earliest Start Time or the latest change time of the Remaining Duration Entity if the state of the entity changed between Earliest Start Time and Latest End Time.

6. Price Mode
   Reflects the configured Price Mode.

7. Price Mode
   Reflects the configured Interval Mode.

8. Enabled
   Set to true if current time is between Earliest Start Time and Latest End Time.

9. Data
   List of calculated intervals to switch sensor on, consisting of start_time, end_time and rank (for Interval Mode intermittend only).