SoftRF UAV edition on ExpressLRS 900mhz receiver.
geofrancis opened this issue · comments
I have recently got back into flying and have been looking to build a SoftRF UAV module again but for a smaller 250g plane and when i was shopping for parts it occurs to me that softrf uav is essentially the same hardware as a ExpressLRS 900mz receiver,
this is the pinout for a generic 900mhz recevier
https://github.com/ExpressLRS/targets/blob/master/RX/Generic%20900.json
{
"serial_rx": 3,
"serial_tx": 1,
"radio_dio0": 4,
"radio_dio1": 5,
"radio_miso": 12,
"radio_mosi": 13,
"radio_nss": 15,
"radio_rst": 2,
"radio_sck": 14,
"power_min": 0,
"power_high": 2,
"power_max": 2,
"power_default": 2,
"power_control": 0,
"power_values": [120,124,127],
"led": 16,
"button": 0
}
What would be the easiest way to modify the code to remove the GPS and leave it with only UAV mode.
before I attempted to modify the code I wanted to get it to compile, but I'm getting a file missing error
software\firmware\source\SoftRF\src\platform\ESP8266.h:33:10: fatal error: Exp_SoftwareSerial.h: No such file or directory