automatically MTR between two servers
Uses remote command execution with SSH and SSH keys for automatic login.
Configure SSH keys to automate login. Additional login details such as username and port can be saved in ~/.ssh/config.
tech@wrkstn 2wayMTR $
tech@wrkstn 2wayMTR $ sh 2wayMTR.sh
+ set +x
FROM: lpic.Lyndell.NET to 159.122.145.74 .
HOST: LPIC.Lyndell.US Loss% Snt Last Avg Best Wrst StDev
1. 2.08.35a9.ip4.static.sl-reve 0.0% 10 0.7 0.7 0.5 0.9 0.1
2. ae11.dar02.dal09.networklaye 0.0% 10 0.3 0.3 0.2 0.4 0.1
3. ae28.bbr02.eq01.dal03.networ 0.0% 10 1.0 1.3 1.0 2.8 0.6
4. ae1.bbr01.tl01.atl01.network 0.0% 10 21.6 21.6 21.5 22.5 0.3
5. ae0.bbr01.eq01.wdc02.network 0.0% 10 34.0 34.1 34.0 34.8 0.2
6. ae7.bbr02.eq01.wdc02.network 0.0% 10 32.5 32.9 32.5 34.0 0.6
7. ae0.bbr01.eq01.ams02.network 10.0% 10 111.9 112.0 111.7 113.0 0.4
8. ae7.bbr02.eq01.ams02.network 10.0% 10 117.4 112.5 111.9 117.4 1.8
9. ae1.bbr01.ic01.mil02.network 10.0% 10 127.9 127.8 127.7 128.3 0.2
10. ae5.dar01.mil01.networklayer 10.0% 10 126.2 126.2 126.2 126.3 0.0
11. po1.fcr01b.mil01.networklaye 10.0% 10 127.1 128.2 127.1 132.7 2.1
12. 4a.91.7a9f.ip4.static.sl-rev 10.0% 10 126.9 126.9 126.8 127.4 0.2
FROM: 159.122.145.74 to lpic.Lyndell.NET .
HOST: fantastico.testbox.thing Loss% Snt Last Avg Best Wrst StDev
1. ??? 100.0 10 0.0 0.0 0.0 0.0 0.0
2. ae11.dar01.mil01.networklaye 0.0% 10 1.2 0.4 0.2 1.2 0.3
3. ae8.bbr01.ic01.mil02.network 0.0% 10 2.3 1.4 0.5 3.5 1.0
4. b5.13.6132.ip4.static.sl-rev 0.0% 10 20.8 21.1 20.8 23.4 0.8
5. ae7.bbr01.eq01.ams02.network 0.0% 10 20.9 21.0 20.8 21.4 0.2
6. ae1.bbr02.eq01.wdc02.network 0.0% 10 100.0 100.8 99.7 107.4 2.4
7. ae7.bbr01.eq01.wdc02.network 0.0% 10 99.7 99.8 99.7 100.2 0.2
8. ae0.bbr01.tl01.atl01.network 10.0% 10 113.2 113.6 113.2 114.6 0.6
9. ae13.bbr02.eq01.dal03.networ 10.0% 10 131.6 131.7 131.6 132.1 0.2
10. ae6.dar02.dal09.networklayer 10.0% 10 132.2 132.2 132.2 132.3 0.0
11. po2.fcr01a.dal09.networklaye 10.0% 10 132.7 132.8 132.5 133.7 0.4
12. 7.08.35a9.ip4.static.sl-reve 11.1% 9 126.8 126.9 126.8 127.2 0.1
tech@wrkstn 2wayMTR $
tech@wrkstn 2wayMTR $
Note, $IP2 failed as detailed below. Is not a root login.
Only root login is supported. Non-root users will encounter the following:
-
mrtis not in the path -
or can't get raw sockets, producing the error below:
mtr: unable to get raw sockets.