ULG version 0.9 - development started in June 2012 - sponsored by CZ.NIC (http://www.nic.cz) - intention is to create a versatile Looking Glass for various routers - genshi and cherrypy was used in the beginning - cherrypy was later dropped and simple CGI was used instead - the CGI scripts currently do not support mod_python nor mod_wsgi Basic instalation procedure is: 1) install prerequisites: Python 2.6 or 2.7, Genshi, Python CGI module, urllib, pexpect and pygraph and GraphViz 2) deploy files in src directory to some place in WWW tree 3) mkdir /etc/ulg; cp config.py.example /etc/ulg/config.py 4) edit config.py to set up routers and credentials 5) edit defaults.py to set up correct paths toward bins 6) create .htaccess file with following contents: <FilesMatch "(.pyc|.*~)"> Deny from all </FilesMatch> Options +ExecCGI AddHandler cgi-script .py (Or use corresponding config of your web server.) 7) access http://yourserver/path-to-ulg/ulg.py via browser 8) change strings and templates in defaults.py and templates/*.html . Procedure for Debian Squeeze/Wheezy and Linux Mint 14 (nadia): 1) apt-get install python python-pexpect python-pygraph python-genshi libgv-python whois All other steps are the same as in generic case. Contacts: * Author: tmshlvck@gmail.com or tomas.hlavacek@nic.cz * GIT hub https://github.com/tmshlvck/ulg * CZ.NIC Git: git://git.nic.cz/ulg.git Future plans: This "pre-release" is only a preview and "technology demonstrator". Requests and contributions are welcomed. I indend to support BIRD (http://bird.network.cz) and Cisco routers and switches and support typical BGP-related commands and also IGP and L2 management commands in order to make LG more useful for ordinary NOC staff especially for information aquisition during outages and problems.