This is the first release of a development board using the STM32F401RCT6 as the main MCU.
- Digital I2C Temperature Sensor (TMP75)
- 256KB I2C EEPROM
- On-board RS485 Transceiver
- Two Analog Input Stages with Amplifier Buffer
- Two Analog Output Stages with Amplifier Buffer
- MicroSD Connector supporting 1 or 4-bit bus
- Four User LEDs
- Four User Buttons
- USB for DFU (Device Firmware Update) and USB device functionality, as well as powering the board
- Onboard voltage regulator from 5V to 3.3V
- SWD Pins for use as STLink (Pin header) and TC2030-IDC 6-Pin Tag-Connect Plug-of-Nails™ Connector (More Info)
- Crystal for HS 8MHz
- Crystal for RTC 32.768KHz
- STL Case available
