This repo provides guides and references:
Quickstart
$ git submodule update --init --recursive
$ export RISCV=/path/to/install/riscv/toolchain
$ ./build.sh
Ubuntu packages needed:
$ sudo apt-get install autoconf automake autotools-dev curl libmpc-dev libmpfr-dev libgmp-dev libusb-1.0-0-dev gawk build-essential bison flex texinfo gperf libtool patchutils bc zlib1g-dev device-tree-compiler pkg-config
Fedora packages needed:
$ sudo dnf install autoconf automake @development-tools curl dtc libmpc-devel mpfr-devel gmp-devel libusb-devel gawk gcc-c++ bison flex texinfo gperf libtool patchutils bc zlib-devel
Note: This requires a compiler with C++11 support (e.g. GCC >= 4.8). To use a compiler different than the default, use:
$ CC=gcc-5 CXX=g++-5 ./build.sh
Note for OS X: We recommend using Homebrew to install the dependencies (dtc gawk gnu-sed gmp mpfr libmpc isl wget automake md5sha1sum
) or even to install the tools directly. This repo will build with Apple's command-line developer tools (clang) in addition to gcc.
The RISC-V GCC/Newlib Toolchain Installation Manual
This document was authored by Quan Nguyen and is a mirrored version (with slight modifications) of the one found at Quan's OCF website. Recent updates were made by Sagar Karandikar.
Last updated August 6, 2014
Introduction
The purpose of this page is to document a procedure through which an interested user can build the RISC-V GCC/Newlib toolchain.
A project with a duration such as this requires adequate documentation to support future development and maintenance. This document is created with the hope of being useful; however, its accuracy is not guaranteed.
This work was completed at Andrew and Yunsup's request.
Table of Contents
- Introduction
- Table of Contents
- Meta-installation Notes
- Installing the Toolchain
- Testing Your Toolchain
- "Help! It doesn't work!"
Meta-installation Notes
You may notice this document strikes you as similar to its bigger sibling, the Linux/RISC-V Installation Manual. That's because the instructions are rather similar. That said...
Running Shell Commands
Instructive text will appear as this paragraph does. Any instruction to execute in your terminal will look like this:
$ echo "execute this"
Optional shell commands that may be required for your particular system will have their prompt preceeded with an O:
O$ echo "call this, maybe"
If you will need to replace a bit of code that applies specifically to your situation, it will be surrounded by [square brackets].
The Standard Build Unit
To instruct how long it will take someone to build the various components of the packages on this page, I have provided build times in terms of the Standard Build Unit (SBU), as coined by Gerard Beekmans in his immensely useful Linux From Scratch website.
On an Intel Xeon Dual Quad-core server with 48 GiB RAM, I
achieved the following build time for binutils
: 38.64 seconds.
Thus, 38.64 seconds = 1 SBU. (EECS members at the University
of California, Berkeley: I used the s141.millennium
server.)
As a point of reference, my 2007 MacBook with an Intel Core 2
Duo and 1 GiB RAM has 100.1 seconds to each SBU. Building
riscv64-unknown-linux-gnu-gcc
, unsurprisingly, took about an hour.
Items marked as "optional" are not measured.
Having Superuser Permissions
You will need root privileges to install
the tools to directories like /usr/bin
, but you may optionally
specify a different installation directory. Otherwise, superuser privileges are
not necessary.
GCC Version
Note: Building riscv-tools
requires GCC >= 4.8 for C++11 support (including thread_local). To use a compiler different than the default (for example on OS X), you'll need to do the following when the guide requires you to run build.sh
:
$ CC=gcc-4.8 CXX=g++-4.8 ./build.sh
Installing the Toolchain
Let's start with the directory in which we will install our
tools. Find a nice, big expanse of hard drive space, and let's call that
$TOP
. Change to the directory you want to install in, and then set
the $TOP
environment variable accordingly:
$ export TOP=$(pwd)
For the sake of example, my $TOP
directory is on
s141.millennium
, at /scratch/quannguyen/noob
, named so
because I believe even a newbie at the command prompt should be able to complete
this tutorial. Here's to you, n00bs!
Tour of the Sources
If we are starting from a relatively fresh install of GNU/Linux, it will be necessary to install the RISC-V toolchain. The toolchain consists of the following components:
riscv-gnu-toolchain
, a RISC-V cross-compilerriscv-fesvr
, a "front-end" server that services calls between the host and target processors on the Host-Target InterFace (HTIF) (it also provides a virtualized console and disk device)riscv-isa-sim
, the ISA simulator and "golden standard" of executionriscv-opcodes
, the enumeration of all RISC-V opcodes executable by the simulatorriscv-pk
, a proxy kernel that services system calls generated by code built and linked with the RISC-V Newlib port (this does not apply to Linux, as it handles the system calls)riscv-tests
, a set of assembly tests and benchmarks
In the installation guide for Linux builds, we built only the
simulator and the front-end server. Binaries built against Newlib with
riscv-gnu-toolchain
will not have the luxury of being run on a full-blown
operating system, but they will still demand to have access to some crucial
system calls.
What's Newlib?
Newlib is a "C library intended for use on embedded systems." It has the advantage of not having so much cruft as Glibc at the obvious cost of incomplete support (and idiosyncratic behavior) in the fringes. The porting process is much less complex than that of Glibc because you only have to fill in a few stubs of glue code.
These stubs of code include the system calls that are
supposed to call into the operating system you're running on. Because there's no
operating system proper, the simulator runs, on top of it, a proxy kernel
(riscv-pk
) to handle many system calls, like open
,
close
, and printf
.
Obtaining and Compiling the Sources (7.87 SBU)
First, clone the tools from the riscv-tools
GitHub
repository:
$ git clone https://github.com/riscv/riscv-tools.git
This command will bring in only references to the repositories that we will need. We rely on Git's submodule system to take care of resolving the references. Enter the newly-created riscv-tools directory and instruct Git to update its submodules.
$ cd $TOP/riscv-tools
$ git submodule update --init --recursive
To build GCC, we will need several other packages, including flex, bison, autotools, libmpc, libmpfr, and libgmp. Ubuntu distribution installations will require this command to be run. If you have not installed these things yet, then run this:
O$ sudo apt-get install autoconf automake autotools-dev curl device-tree-compiler libmpc-dev libmpfr-dev libgmp-dev gawk build-essential bison flex texinfo gperf libtool patchutils bc zlib1g-dev
Before we start installation, we need to set the
$RISCV
environment variable. The variable is used throughout the
build script process to identify where to install the new tools. (This value is
used as the argument to the --prefix
configuration switch.)
$ export RISCV=$TOP/riscv
If your $PATH
variable does not contain the
directory specified by $RISCV
, add it to the $PATH
environment variable now:
$ export PATH=$PATH:$RISCV/bin
The number of parallel compiler runs is set by $MAKEFLAGS
.
With everything else set up, run the build script. Recall that if you're using a new-version of gcc that isn't the default on your system, you'll need to precede the ./build.sh
with CC=gcc-4.8 CXX=g++-4.8
:
$ ./build.sh
Testing Your Toolchain
Now that you have a toolchain, it'd be a good idea to test it
on the quintessential "Hello world!" program. Exit the riscv-tools
directory and write your "Hello world!" program. I'll use a long-winded
echo
command.
$ cd $TOP
$ echo -e '#include <stdio.h>\n int main(void) { printf("Hello world!\\n"); return 0; }' > hello.c
Then, build your program with riscv64-unknown-elf-gcc
.
$ riscv64-unknown-elf-gcc -o hello hello.c
When you're done, you may think to do ./hello
,
but not so fast. We can't even run spike hello
, because our "Hello
world!" program involves a system call, which couldn't be handled by our host
x86 system. We'll have to run the program within the
proxy kernel, which itself is run by spike
, the RISC-V
architectural simulator. Run this command to run your "Hello world!"
program:
$ spike pk hello
The RISC-V architectural simulator, spike
, takes
as its argument the path of the binary to run. This binary is pk
,
and is located at $RISCV/riscv-elf/bin/pk
.
spike
finds this automatically.
Then, riscv-pk
receives as its
argument the name of the program you want to run.
Hopefully, if all's gone well, you'll have your program saying, "Hello world!". If not...
"Help! It doesn't work!"
Most of the errors below were seen when trying to build riscv-tools on CentOS linux distribution with nfs file-system.
C++11 is not supported, although gcc is updated
This problem occured due to old OS installation repository. A possible solution for CentOS distribution:
wget http://people.centos.org/tru/devtools-2/devtools-2.repo -O /etc/yum.repos.d/devtools-2.repo
sudo yum upgrade
sudo yum install devtoolset-2-gcc devtoolset-2-binutils devtoolset-2-gcc-c++
scl enable devtoolset-2 bash
Last operation will open a shell. Try to run .build.sh from within this shell.
“error: Building GCC requires GMP 4.2+, MPFR 2.4.0+ and MPC 0.8.0+”
Try the following:
cd <riscv-tools>/riscv-gnu-toolchain/riscv-gcc
contrib/download_prerequisites
sudo yum install gmp gmp-devel mpfr mpfr-devel libmpc libmpc-devel
Also try to follow the instructions of C++11 is not supported.
Build script got stuck on "Installing project riscv-fesvr"
That's a very simple problem of output redirection. The solution is to open the /build.common file and change the following line:
$MAKE install >> build.log
to:
$MAKE install | tee install.log
Then when you run the build script, you will see requests to press y to continue which were hidden before. Just follow the instructions.
The Linux/RISC-V Installation Manual
Introduction
The purpose of this page is to document a procedure through which an interested user can install an executable image of the RISC-V architectural port of the Linux kernel.
A project with a duration such as this requires adequate documentation to support future development and maintenance. This document is created with the hope of being useful; however, its accuracy is not guaranteed.
This document is a mirrored version (with slight modifications) of the one found at Quan's OCF website
Table of Contents
- Introduction
- Table of Contents
- Meta-installation Notes
- Installing the Toolchain
- Building the Linux Kernel
- Building BusyBox
- Creating a Root Disk Image
- "Help! It doesn't work!"
- Optional Commands
Meta-installation Notes
Running Shell Commands
Instructive text will appear as this paragraph does. Any instruction to execute in your terminal will look like this:
$ echo "execute this"
Optional shell commands that may be required for your particular system will have their prompt preceeded with an O:
O$ echo "call this, maybe"
When booted into the Linux/RISC-V kernel, and some command is to be
run, it will appear as a root prompt (with a #
as the prompt):
# echo "run this in linux"
If you will need to replace a bit of code that applies specifically to your situation, it will be surrounded by [square brackets].
The Standard Build Unit
To instruct how long it will take someone to build the various components of the packages on this page, I have provided build times in terms of the Standard Build Unit (SBU), as coined by Gerard Beekmans in his immensely useful Linux from Scratch website.
On an Intel Xeon Dual Quad-core server with 48 GiB RAM, I
achieved the following build time for binutils
: 38.64 seconds.
Thus, 38.64 seconds = 1 SBU. (EECS members at the University
of California, Berkeley: I used the s141.millennium
server.)
As a point of reference, my 2007 MacBook with an Intel Core 2
Duo and 1 GiB RAM has 100.1 seconds to each SBU. Building
riscv64-unknown-linux-gnu-gcc
, unsurprisingly, took about an hour.
Items marked as "optional" are not measured.
Having Superuser Permissions
You will need root privileges to install
the tools to directories like /usr/bin
, but you may optionally
specify a different installation directory. Otherwise, superuser privileges are
not necessary.
Installing the Toolchain (11.81 + ε SBU)
Let's start with the directory in which we will install our
tools. Find a nice, big expanse of hard drive space, and let's call that
$TOP
. Change to the directory you want to install in, and then set
the $TOP
environment variable accordingly:
$ export TOP=$(pwd)
For the sake of example, my $TOP
directory is on
s141.millennium
, at /scratch/quannguyen/noob
, named so
because I believe even a newbie at the command prompt should be able to boot
Linux using this tutorial. Here's to you, n00bs!
Installing the RISC-V simulator (0.40 SBU)
If we are starting from a relatively fresh install of GNU/Linux, it will be necessary to install the RISC-V toolchain. The toolchain consists of the following components:
riscv-gnu-toolchain
, a RISC-V cross-compilerriscv-fesvr
, a "front-end" server that services calls between the host and target processors on the Host-Target InterFace (HTIF) (it also provides a virtualized console and disk device)riscv-isa-sim
, the ISA simulator and "golden standard" of executionriscv-opcodes
, the enumeration of all RISC-V opcodes executable by the simulatorriscv-pk
, a proxy kernel that services system calls generated by code built and linked with the RISC-V Newlib port (this does not apply to Linux, as it handles the system calls)riscv-tests
, a set of assembly tests and benchmarks
In actuality, of this list, we will need to build only
riscv-fesvr
and riscv-isa-sim
. These are the two
components needed to simulate RISC-V binaries on the host machine. We will also need to
build riscv64-unknown-linux-gnu-gcc
, but this involves a little modification of
the build procedure for riscv64-unknown-elf-gcc
.
First, clone the tools from the riscv
GitHub
repository:
$ git clone https://github.com/riscv/riscv-tools.git
This command will bring in only references to the repositories that we will need. We rely on Git's submodule system to take care of resolving the references. Enter the newly-created riscv-tools directory and instruct Git to update its submodules.
$ cd $TOP/riscv-tools
$ git submodule update --init --recursive
To build GCC, we will need several other packages, including flex, bison, autotools, libmpc, libmpfr, and libgmp. Ubuntu distribution installations will require this command to be run. If you have not installed these things yet, then run this:
O$ sudo apt-get install autoconf automake autotools-dev curl device-tree-compiler libmpc-dev libmpfr-dev libgmp-dev gawk build-essential bison flex texinfo gperf
Before we start installation, we need to set the
$RISCV
environment variable. The variable is used throughout the
build script process to identify where to install the new tools. (This value is
used as the argument to the --prefix
configuration switch.)
$ export RISCV=$TOP/riscv
If your $PATH
variable does not contain the
directory specified by $RISCV
, add it to the $PATH
environment variable now:
$ export PATH=$PATH:$RISCV/bin
Since we only need to build a few tools, we will use a
modified build script, listed in its entirety below. Remember that we'll build
riscv64-unknown-linux-gnu-gcc
shortly afterwards. If you want to build the full
toolchain for later use, see here.
[build-spike-only.sh contents]
1 #!/bin/bash
2 . build.common
3 build_project riscv-fesvr --prefix=$RISCV
4 build_project riscv-isa-sim --prefix=$RISCV --with-fesvr=$RISCV
Run the build script.
$ ./build-spike-only.sh
Building riscv64-unknown-linux-gnu-gcc
(11.41 SBU)
riscv64-unknown-linux-gnu-gcc
is the name of the
cross-compiler used to build binaries linked to the GNU C Library
(glibc
) instead of the Newlib library. You can build Linux with
riscv64-unknown-elf-gcc
, but you will need riscv64-unknown-linux-gnu-gcc
to
cross-compile applications, so we will build that instead.
Enter the riscv-gnu-toolchain
directory and run the configure script
to generate the Makefile.
$ ./configure --prefix=$RISCV
These instructions will place your
riscv64-unknown-linux-gnu-gcc
tools in the same installation directory as the
riscv64-unknown-elf-gcc
tool installed earlier. This arrangement is the simplest,
but you could optionally supply a different prefix, so long as the bin directory
within that prefix is in your PATH.
Run this command to start the build process:
$ make linux
Building the Linux Kernel (0.40 + ε SBU)
Obtaining and Patching the Kernel Sources
We are finally poised to bring in the Linux kernel sources.
Change out of the riscv-tools/riscv-gnu-toolchain
directory and clone the
riscv-linux
Git repository into this directory:
linux-3.14._xx_
, where xx represents the current
minor revision (which, as of 11 February 2014, is "33").
$ cd $TOP
$ git clone https://github.com/riscv/riscv-linux.git linux-3.14.33
Download the current minor revision of the 3.14 Linux kernel series
from The Linux Kernel Archives, and in one fell
swoop, untar them over our repository. (The -k
switch ensures that
our .gitignore
and README
files don't get clobbered.)
$ curl -L https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.14.33.tar.xz | tar -xJkf -
Configuring the Linux Kernel
The Linux kernel is seemingly infinitely configurable. However, with the current development status, there aren't that many devices or options to tweak. However, start with a default configuration that should work out-of-the-box with the ISA simulator.
$ make ARCH=riscv defconfig
If you want to edit the configuration, you can use a text-based GUI (ncurses) to edit the configuration:
O$ make ARCH=riscv menuconfig
Among other things, we have enabled by default procfs, ext2, and the HTIF virtualized devices (a block driver and console). In development, it can be very useful to enable "early printk", which will print messages to the console if the kernel crashes very early. You can access this option at "Early printk" in the "Kernel hacking" submenu.
Linux kernel menuconfig interface.
Begin building the kernel once you're satisfied with your
configuration. Note the pattern: to build the RISC-V kernel, you must
specify the ARCH=riscv
in each invocation of make
.
This line is no exception. If you want to speed up the process, you can pass the
-j [number]
option to make.
$ make -j16 ARCH=riscv
Congratulations! You've just cross-compiled the Linux kernel for RISC-V! However, there are a few more things to take care of before we boot it.
Building BusyBox (0.26 SBU)
We currently develop with BusyBox, an unbelievably useful set of utilities that all compile into one multi-use binary. We use BusyBox without source code modifications. You can obtain the source at https://www.busybox.net. In our case, we will use BusyBox 1.26.2, but other versions should work fine.
Currently, we need it for its init
and
ash
applets, but with bash
cross-compiled for RISC-V,
there is no longer a need for ash
.
First, obtain and untar the source:
$ curl -L http://busybox.net/downloads/busybox-1.26.2.tar.bz2 > busybox-1.26.2.tar.bz2
$ tar xvjf busybox-1.26.2.tar.bz2
Then, enter the directory and turn off every configuration option:
$ cd busybox-1.26.2
$ make allnoconfig
We will need to change the cross-compiler, set the build to
"static" (if desired, you can make it dynamic, but you'll have to copy some
libraries later). We will also enable the init
, ash
,
and mount
applets. Also, disable job control for ash
when the drop down menu for ash
's suboptions appear.
Here are the configurations you will have to change:
CONFIG_STATIC=y
, listed as "Build BusyBox as a static binary (no shared libs)" in BusyBox Settings → Build OptionsCONFIG_CROSS_COMPILER_PREFIX=riscv64-unknown-linux-gnu-
, listed as "Cross Compiler prefix" in BusyBox Settings → Build OptionsCONFIG_FEATURE_INSTALLER=y
, listed as "Support --install [-s] to install applet links at runtime" in BusyBox Settings → General ConfigurationCONFIG_INIT=y
, listed as "init" in Init utilitiesCONFIG_ASH=y
, listed as "ash" in ShellsCONFIG_ASH_JOB_CONTROL=n
, listed as "Ash → Job control" in ShellsCONFIG_MOUNT=y
, listed as "mount" in Linux System UtilitiesCONFIG_FEATURE_USE_INITTAB=y
, listed as "Support reading an inittab file" in Init Utilities
Enter the configuration interface much in the same way as that of the Linux kernel:
O$ make menuconfig
BusyBox menuconfig interface. Looks familiar, eh?
Once you've finished, make BusyBox. You don't need to specify
$ARCH
, because we've passed the name of the cross-compiler prefix.
$ make -j16
Once that completes, you now have a BusyBox binary cross-compiled to run on RISC-V. Now we'll need a way for the kernel to access the binary, and we'll use a root disk image for that. Before we proceed, change back into the directory with the Linux sources.
$ cd $TOP/linux-3.14.33
Creating a Root Disk Image
We use an initramfs to store our binaries (BusyBox in particular).
Currently, we have a root file system pre-packaged specifically for the RISC-V release. You can obtain it by heading to the index of my website, https://ocf.berkeley.edu/~qmn, finding my email, and contacting me.
To create your own initramfs, there are a few directories that you should have:
/bin
/dev
/etc
/lib
/proc
/sbin
/tmp
/usr
So create them:
$ mkdir root
$ cd root
$ mkdir -p bin etc dev lib proc sbin sys tmp usr usr/bin usr/lib usr/sbin
Then, place the BusyBox executable we just compiled in
/bin
.
$ cp $TOP/busybox-1.26.2/busybox bin
If you have built BusyBox statically, that will be all that's needed. If you want to build BusyBox dynamically, you will need to follow a slightly different procedure, described here.
We will also need to prepare an initialization table in the
aptly-named file inittab
, placed in /etc
. Here is the
inittab
from our disk image:
::sysinit:/bin/busybox mount -t proc proc /proc
::sysinit:/bin/busybox mount -t tmpfs tmpfs /tmp
::sysinit:/bin/busybox mount -o remount,rw /dev/htifblk0 /
::sysinit:/bin/busybox --install -s
/dev/console::sysinit:-/bin/ash
Line 1 mounts the procfs filesystem onto /proc
.
Line 2 does similarly for tmpfs. Line 3 mounts the HTIF-virtualized block
device (htifbd
) onto root. Line 4 installs the various BusyBox
applet symbolic links in /bin
and elsewhere to make it more
convenient to run them. Finally, line 5 opens up an ash
shell on
the HTIF-virtualized TTY (console
, mapped to ttyHTIF
) for a connection.
Download a copy of the example inittab
using this command:
$ curl -L http://riscv.org/install-guides/linux-inittab > etc/inittab
If you would like to use getty
instead, change
line 5 to invoke that:
5 ::respawn:/bin/busybox getty 38400 ttyHTIF0
Once you've booted Linux and created the symlinks with line 4, they will persist between boots of the Linux kernel. This will cause a bunch of unsightly errors in every subsequent boot of the kernel. At the next boot, comment out line 4.
Also, we will need to create a symbolic link to /bin/busybox
for init
to work.
$ ln -s ../bin/busybox sbin/init
$ ln -s sbin/init init
We'll also need a character device for the console:
sudo mknod dev/console c 5 1
We are ready to create our initramfs:
find . | cpio --quiet -o -H newc > <riscv-linux>/rootfs.cpio
Configure linux to embed the created cpio archive. In the riscv-linux folder type
make ARCH=riscv menuconfig
Enter to General Setup, mark "Initial RAM filesystem and RAM disk". Then go to the option "Initramfs source file" and press enter to change it to "rootfs.cpio". Then Exit all the way back and save to .config.
Don't forget to rebuild riscv-linux and riscv-pk!
cd <riscv-linux>
make -j4 ARCH=riscv vmlinux
cd <riscv-pk>/build
rm -rf *
../configure --prefix=$RISCV --host=riscv64-unknown-linux-gnu --with-payload=<riscv-linux>/vmlinux
make
make install
Now, we're ready to boot a most basic kernel, with a shell.
Invoke spike
, the RISC-V architectural simulator, named after the
golden spike that joined the two
tracks of the Transcontinental Railroad, and considered to be the golden model of
execution. The command looks
like this:
$ spike bbl vmlinux
vmlinux
is the name of the compiled Linux kernel binary.
If there are no problems, an ash
prompt will
appear after the boot process completes. It will be pretty useless without the
usual plethora of command-line utilities, but you can add them as BusyBox
applets. Have fun!
To exit the simulator, hit Ctrl-C
.
Linux boot and "Hello world!"
If you want to reuse your disk image in a subsequent boot of the kernel, remember to remove (or comment out) the line that creates the symbolic links to BusyBox applets. Otherwise, it will generate several (harmless) warnings in each subsequent boot.
"Help! It doesn't work!"
First take a look at the Newlib problem list which are also relevant to here. Here are some more problems that can occur in the linux build:
Problems with "flock"
Some filesystems don't support flock, e.g. nfs (you can check your filesystem by df -Th
). Look for
"+flock $(SYSROOT)/.lock" in the following files and delete them:
riscv-tools/riscv-gnu-toolchain/Makefile
riscv-tools/riscv-gnu-toolchain/Makefile.in
riscv-tools/riscv-gnu-toolchain/build/Makefile
Avoid building with concurrency (i.e. avoid running make with the -j flag).
"These critical programs are missing or too old: make"
Not sure why, but gmake doesn't work well for the riscv-tools build in some platforms.
In order to use make instead of gmake, open the file <riscv-tools>/riscv-gnu-toolchain/riscv-glibc/configure
and replace the following line:
for ac_prog in gnumake gmake make
with:
for ac_prog in gnumake make gmake
"Operation not permitted" when trying to create character device
This may occur when running the following command:
sudo mknod dev/console c 5 1
Even if you have sudo permissions, you may still see this message in some filesystem (e.g. nfs). You can create a virtual drive by:
dd if=/dev/zero of=root.bin bs=1M count=64
mkfs.ext2 -F root.bin
chmod 777 root.bin
mkdir mnt
sudo mount -o loop root.bin mnt
If the mkfs.ext2
command not found, try instead:
/sbin/mkfs.ext2 -F root.bin
Copy the contents in the above created root directory into the new mnt directory and continue to create the cpio archive with the mnt directory instead of the root directory.
When finished, you may unmount by:
cd ..
sudo umount root.bin
compiler-gcc6.h not found
Use newer linux version for RISC-V. You can find it in https://github.com/riscv/riscv-linux Notice that similar problems as detailed here may occur, so don't forget to check this problem list in case of problems.
Error on build about "mcmodel=medany"
Such error may occur in one of the stages that requires the RISC-V gcc compiler. Some build stages use the default x86 gcc compiler installed on the x86 machine to compile if the RISC-V gcc not found. Some possible cases for that:
- RISC-V compiler is not built.
- $RISCV/bin is not in $PATH (Use "setenv PATH $RISCV/bin" or similar export command to add it to path).
- RISC-V compiler has been built but for the wrong variant (built for newlib and not for linux, 32/64 bit variant issue...).
- gcc path is wrong. For example, if "CONFIG_CROSS_COMPILER_PREFIX=riscv-linux-" is used in the Busybox build configuration instead of "CONFIG_CROSS_COMPILER_PREFIX=riscv64-unknown-linux-gnu-" but the RISC-V compiler is built into riscv64-unknown-linux-gnu-gcc, the busybox configurator will not find the correct gcc and will use the x86 as default. Similar problem may occur when compiling https://github.com/riscv/riscv-pk with a wrong --host argument.
Spike exits immediately with "This is bbl's dummy_payload" message
https://github.com/riscv/riscv-pk should be rebuilt with --with-payload flag points to the compiled vmlinux (replace the riscv-pk and riscv-linux below with the appropriate repository paths):
cd <riscv-pk>/build
rm -rf *
../configure --prefix=$RISCV --host=riscv64-unknown-linux-gnu --with-payload=<riscv-linux>/vmlinux
make
make install
Optional Commands
Depending on your system, you may have to execute a few more shell commands or execute them differently. It's not too useful if you've arrived here after reading the main text of the document; it's best that you're referred here instead.
Building the Full Toolchain (7.62 SBU)
If you want to build riscv64-unknown-elf-gcc
(as
distinct from riscv64-unknown-linux-gnu-gcc
), riscv-pk
, and
riscv-tests
, then simply run the full build script rather than the
abbreviated one I provided.
O$ ./build.sh
Installing a Fresh Copy of the Linux Headers
If you (or someone you know) has changed the Linux headers,
you'll need to install a new version to your system root before you build
riscv64-unknown-linux-gnu-gcc
to make sure the kernel and the C library agree on
their interfaces. (Note that you'll need to pull in the Linux kernel sources
before you perform these steps. If you haven't, do so now.)
First, go to the Linux directory and perform a headers check:
O$ cd $TOP/linux-3.14.33
$ make ARCH=riscv headers_check
Once the headers have been checked, install them.
O$ make ARCH=riscv headers_install INSTALL_HDR_PATH=$RISCV/sysroot64/usr
(Substitute the path specified by INSTALL_HDR_PATH
if so desired.)
Using Filesystem in Userspace (FUSE) to Create a Disk Image
If you are unable (or unwilling) to use mount
to
mount the newly-created disk image for modification, and you also have
Filesystem in Userspace (FUSE), you can use these commands to modify your disk
image.
First, create a folder as your mount point.
O$ mkdir mnt
Then, mount the disk image with FUSE. The -o +rw
option is considered experimental by FUSE developers, and may
corrupt your disk image. If you experience strange behaviors in your disk image,
you might want to delete your image and make a new one. Continuing, mount the
disk:
O$ fuseext2 -o rw+ root.bin mnt
Modify the disk image as described, but remember to unmount
the disk using FUSE, not umount
:
O$ fusermount -u mnt
Building BusyBox as a Dynamically-Linked Executable
If you want to conserve space on your root disk, or you want to support dynamically-linked binaries, you will want to build BusyBox as a dynamically-linked executable. You'll need to have these libraries:
libc.so.6
, the C libraryld.so.1
, the run-time dynamic linker
If BusyBox calls for additional libraries (e.g.
libm
), you will need to include those as well.
These were built when we compiled
riscv64-unknown-linux-gnu-gcc
and were placed in $RISCV/sysroot64
. So, mount
your root disk (if not mounted already), cd into it, and copy the libraries into
lib
:
O$ cp $RISCV/sysroot64/lib/libc.so.6 lib/
O$ cp $RISCV/sysroot64/lib/ld.so.1 lib/
That's it for the libraries. Go back to the BusyBox
configuration and set BusyBox to be built as a dynamically-linked binary by
unchecking the CONFIG_STATIC
box in the menuconfig interface.
CONFIG_STATIC=n
, listed as "Build BusyBox as a static binary (no shared libs)" in BusyBox Settings → Build Options
To make things a little faster, I've used a bit of
sed
magic instead.
O$ cd $TOP/busybox-1.26.2
O$ sed -i 's/CONFIG_STATIC=y/# CONFIG_STATIC is not set/' .config
Then, rebuild and reinstall BusyBox into mnt/bin
.
O$ make -j16
O$ cd $TOP/linux-3.14.33/mnt
O$ cp $TOP/busybox-1.26.2/busybox bin
References
-
Waterman, A., Lee, Y., Patterson, D., and Asanovic, K,. "The RISC-V Instruction Set Manual," vol. II, https://inst.eecs.berkeley.edu/~cs152/sp12/handouts/riscv-supervisor.pdf, 2012.
-
Bovet, D.P., and Cesati, M. Understanding the Linux Kernel, 3rd ed., O'Reilly, 2006.
-
Gorman, M. Understanding the Linux Virtual Memory Manager, http://www.csn.ul.ie/~mel/docs/vm/guide/pdf/understand.pdf, 2003.
-
Corbet, J., Rubini, A., and Kroah-Hartman, G. Linux Device Drivers, 3rd ed., O'Reilly, 2005.
-
Beekmans, G. Linux From Scratch, version 7.3, http://www.linuxfromscratch.org/lfs/view/stable/, 2013.