lucasbrigida / openpnp

My pick and place machine controlled by the great OpenPNP software.

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

My OpenPnP pick and place machine stuff

This is a place where a publish all my work building a pick and place machine including mechanics, electronics, Marlin firmware modifications and 3D printed designs.

The machine is driven by the excellent and open sourced OpenPNP software.

My pick and place machine running OpenPNP

Things to do

This is still a work-in-progress project, so not everything is either published or at final stage. Currently following tasks are ongoing:

Z-axis rework

Currently the Z-axis uses Igus slider which are showing high tolerances when pushed/pulled in Y direction. The rails will be therefore replaced with dual MGN9 rails with 2 carriages each for better stability/accuracy. A dual rail design could then also be used for a dual-nozzle setup.

X-axis rework

Also the Igus rails on the X-axis are unacceptable. Seems Igus rails are only halfway usable when lying flat, just like for the Y-axis. The new X-axis will use two MGN9 rails, one on top and one at the bottom of the X-axis profile.

Updates

  • 12.09.2020 : Added X belt tensioner mount
  • 24.08.2020 : Added vacuum pump mount
  • 23.08.2020 : Added OpenSCAD designs for electronics
  • 23.08.2020 : Added Y axis OpenSCAD design files
  • 15.08.2020 : Updated Tool Changer design
  • 14.08.2020 : Added OpenSCAD Camera Mounts
  • 14.08.2020 : Added OpenSCAD CP40 Nozzle Holder

About

My pick and place machine controlled by the great OpenPNP software.

License:GNU General Public License v3.0


Languages

Language:OpenSCAD 100.0%