PushProx
PushProx is a client and proxy that allows transversing of NAT and other similar network topologies by Prometheus, while still following the pull model.
While this is reasonably robust in practice, this is a work in progress.
Running
First build the proxy and client:
go get github.com/robustperception/pushprox/{client,proxy}
cd ${GOPATH-$HOME/go}/src/github.com/robustperception/pushprox/client
go build
cd ${GOPATH-$HOME/go}/src/github.com/robustperception/pushprox/proxy
go build
Run the proxy somewhere both Prometheus and the clients can get to:
./proxy
On every target machine run the client, pointing it at the proxy:
./client -proxy-url=http://proxy:8080/
In Prometheus, use the proxy as a proxy_url:
scrape_configs:
- job_name: node
proxy_url: http://proxy:8080/
static_configs:
- targets: ['client:9100'] # Presuming the FQDN of the client is "client".
If the target must be scraped over SSL/TLS, add:
params:
_scheme: [https]
rather than the usual scheme: https. Only the default scheme: http works with the proxy,
so this workaround is required.
Service Discovery
The /clients endpoint will return a list of all registered clients in the format
used by file_sd_configs. You could use wget in a cronjob to put it somewhere
file_sd_configs can read and then then relabel as needed.
How It Works
The client registers with the proxy, and awaits instructions.
When Prometheus performs a scrape via the proxy, the proxy finds the relevant client and tells it what to scrape. The client performs the scrape, sends it back to the proxy which passes it back to Prometheus.
Security
There is no authentication or authorisation included, a reverse proxy can be put in front though to add these.
Running the client allows those with access to the proxy or the client to access all network services on the machine hosting the client.