lttgmail / qubic_check_solution_number

A Linux shell script that sends an email message when the computer finds new solutions.

qubic_check_solution_number

A Linux shell script that sends an email message when the computer finds new solutions.

更新 (Update)

sudo apt update

安装mail命令, Postfix Configuration界面选择No configuration (Install mail command, select No configuration in the Postfix Configuration interface)

sudo apt-get install mailutils

安装ssmtp (Install ssmtp)

sudo apt install ssmtp

安装vim (Install vim)

sudo apt install vim

安装jq (Intsll jq)

sudo apt install jq

进入网易云或其他邮箱 开启ssmtp，具体操作请百度 (Access Netease Cloud or another email service to enable ssmtp)

https://blog.csdn.net/qq_34345149/article/details/107483029

编辑配置文件ssmtp.conf (Edit the ssmtp.conf configuration file)

sudo vim /etc/ssmtp/ssmtp.conf
按下insert键向ssmtp.conf添加以下内容: (Press the insert key and add the following content to ssmtp.conf:)
root=[e-mail]
mailhub=smtp.163.com:465
AuthUser=[e-mail]
AuthPass=xxxxxxxx # 网易邮箱授权密码 (# Netease email authorization password)
UseTLS=Yes
按esc键后按下小写wq，随后按下enter键退出ssmtp.conf文件 (Press the esc key then type lowercase wq, and press the enter key to exit the ssmtp.conf file)

编辑配置文件 (Edit the configuration file)

sudo vim /etc/ssmtp/revaliases
按下insert键向revaliases中添加以下内容 (Press the insert key and add the following content:)
ltt:1********[e-mail]:smtp.163.com:465 #linux系统用户名:邮箱:mailhub (Linux_system_username:email:mailhub)
按esc键后按下小写wq，随后按下enter键退出revaliases文件 (Press the esc key then type lowercase wq, and press the enter key to exit the revaliases file)

进入到check_solutions.sh所在文件夹，右键打开终端，在新打开的终端中执行 (Openning to the folder containing check_solutions.sh, right-click to open a terminal, and execute in the new terminal)

sudo chmod +x check_solutions.sh

编辑config.json文件 (Edit the config.json file)

在config.json文件中修改邮箱及机器名称，json中的邮箱与前文配置文件中的邮箱不同。 (Modify the email and machine name in the config.json file, the email in json is different from the email in the previous configuration file.)

间隔600s执行脚本，可自行修改，单位为秒 (Execute the script every 600s, can be modified as needed, unit is seconds)

watch -n 600 $(pwd)/check_solutions.sh

停止命令 (Stop command)

ctrl+c