#Skywriter
This repository contains libraries and examples for the Skywriter boards.
##Installing Software
You can usually use our quick-n-easy installer to get Skywriter up and running on a Pi. Type the following into a terminal on your Raspberry Pi, use LXTerminal if you're looking at the desktop:
curl -sSL get.pimoroni.com/skywriter | bash
For full instructions on installing Skywriter, check out the library README file.
##Skywriter to Pi Connection
You can use a full-sized Skywriter board with your Raspberry Pi and our library by mimicking the connections that the HAT users. They are as follows:
Skywriter | Raspberry Pi |
---|---|
GND | GND |
TRFR | GPIO 27 |
RESET | GPIO 17 |
SCL | GPIO 3 / SCL |
SDA | GPIO 2 / SDA |
VCC | 3V |