evl-emu

This project is designed to allow Home Assistant to integrate with a DSC IT-100 integration module. As it stands, there is no native IT-100 integration in HA yet, and this could still be useful in a situation where you don't have a serial port available to HA and would prefer an IP-based solution.

Fair warning, I haven’t tested this extensively and I offer no guarantees it will work, but I thought I’d share it in case it’s useful to someone. It’s written using the Python multiprocessing libraries so it spawns several processes that each perform one task. Ideally this would be rewritten in a cleaner way with asyncio but that’s currently beyond my ability.

I have this running under CentOS and Raspbian with the DSC panel connected via a serial-USB adapter at /dev/it100, and a Home Asssistant instance inside Docker on another server. You might want to use a udev rule or /dev/serial/by-id/whatever if you have multiple USB/Serial interfaces to ensure the correct one is used.

Note: This requires the ‘pyserial’ module for interacting with the serial port.

Emulator Setup

Clone this repo

cd $HOME
git clone https://github.com/SolidElectronics/evl-emu.git

Change the baud rate and port in evl-emu.py to match your device
Change 'host' in the HomeAssistant envisalink.yaml to the emulator system's IP address.
Replace '/home/hass' in the examples below with the correct path for your system.

rc.local

For systems that have an rc.local file, use this one-liner to start the service.

/bin/su -c '/home/hass/evl-emu/evl-emu.py >/dev/null 2>&1' hass &

systemd

For systems using systemd, use this service file.

cat <<EOF > /usr/lib/systemd/system/evl-emu.service
[Unit]
Description=Envisalink emulator
Wants=network.target
After=network.target

[Service]
User=hass
Group=hass
Type=simple
PIDFile=/run/evl-emu.pid
ExecStart=/home/hass/evl-emu/evl-emu.py --info
ExecStop=/usr/bin/rm /run/evl-emu.pid
Restart=always
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

systemctl daemon-reload

Home Assistant Setup

configuration.yaml

envisalink: !include envisalink.yaml

envisalink.yaml

Change 0000 to a valid code (for arming and disarming the panel)

I only included four zones here, and it probably only works with one partition.

The user_name and password are not used, but need to be present in the config file.

  host: 1.2.3.4
  panel_type: DSC
  user_name: user
  password: pass
  code: '0000'
  zones:
    1:
      name: 'Front door'
      type: 'door'
    2:
      name: 'Garage back door'
      type: 'door'
    3:
      name: 'Living Room Windows'
      type: 'window'
    4:
      name: 'Family Room Motion'
      type: 'motion'
#...
  partitions:
    1:
      name: 'Alarm'

The alarm zones need a name and a "type" the type comes from the list of Device Classes for binary sensors in Home Assistant

None: Generic on/off. This is the default and doesn’t need to be set.
battery: On means low, Off means normal
cold: On means cold, Off means normal
connectivity: On means connected, Off means disconnected
door: On means open, Off means closed
garage_door: On means open, Off means closed
gas: On means gas detected, Off means no gas (clear)
heat: On means hot, Off means normal
light: On means light detected, Off means no light
lock: On means open (unlocked), Off means closed (locked)
moisture: On means moisture detected (wet), Off means no moisture (dry)
motion: On means motion detected, Off means no motion (clear)
moving: On means moving, Off means not moving (stopped)
occupancy: On means occupied, Off means not occupied (clear)
opening: On means open, Off means closed
plug: On means device is plugged in, Off means device is unplugged
power: On means power detected, Off means no power
presence: On means home, Off means away
problem: On means problem detected, Off means no problem (OK)
safety: On means unsafe, Off means safe
smoke: On means smoke detected, Off means no smoke (clear)
sound: On means sound detected, Off means no sound (clear)
vibration: On means vibration detected, Off means no vibration (clear)
window: On means open, Off means closed

llunved / evl-emu