ljmf00 / home-infrastructure

Home Server ansible configuration

home-server

Home Server ansible configuration

Usage

Running ansible playbooks can be done either with ansible-playbook binary or using configure script:

./configure playbook setup-torns

This will run playbooks/setup-torns.yml ansible playbook.

Configure every host

To configure every host properly, you can just run:

./configure

And it will run every playbook in order for you.

Pre-configuration

They should have base, base-devel, linux, linux-headers python and netctl installed.

It's possible to use different linux versions like:

• linux-lts
• linux-hardened
• linux-zen

Main network interface should have static IPv4 address to the specified on hosts file.

mars machine

This machine should be installed with linux-lts due to fucking nvidia.

This machine should have mdadm package and md3 disks in software RAID pre-configured.

luna machine

This server should be installed with linux-hardened.

This machine should have mdadm package and configured following the below schema:

NAME      MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINT
sda         8:0    0  37.3G  0 disk
└─md127     9:127  0  74.5G  0 raid0 /srv
sdb         8:16   0  37.3G  0 disk
└─md127     9:127  0  74.5G  0 raid0 /srv
sdc         8:32   0 111.8G  0 disk
├─sdc1      8:33   0   100G  0 part  /
└─sdc2      8:34   0  11.8G  0 part  [SWAP]
sdd         8:48   0   2.7T  0 disk
└─sdd1      8:49   0   2.7T  0 part
  └─md126   9:126  0   2.7T  0 raid1 /mnt
sde         8:64   0 149.1G  0 disk
└─sde1      8:65   0   149G  0 part  /home
sdf         8:80   0   2.7T  0 disk
└─sdf1      8:81   0   2.7T  0 part
  └─md126   9:126  0   2.7T  0 raid1 /mnt