go-l2tp is suite of Go libraries for building L2TP applications on Linux systems.
- L2TPv2 (RFC2661) and L2TPv3 (RFC3931) data plane via. Linux L2TP subsystem
- AF_INET and AF_INET6 tunnel addresses
- UDP and L2TPIP tunnel encapsulation
- L2TPv2 control plane in client/LAC mode
- PPPoE (RFC2561) control and data plane via. Linux L2TP subsystem.
If you're familiar with Go, you can skip this section.
Prior to installing go-l2tp, install the Go language distribution which includes the compiler and other tooling required to install Go programs. Please follow the instructions from the Go project to get your installation up and running.
You can now install go-l2tp as follows:
go get github.com/katalix/go-l2tp
Read on for instructions on coding using the library.
import (
"github.com/katalix/go-l2tp/l2tp"
"github.com/katalix/go-l2tp/pppoe"
"github.com/katalix/go-l2tp/config"
)
# Note we're ignoring errors for brevity.
# Read configuration using the config package.
# This is optional: you can build your own configuration
# structures if you prefer.
config, _ := config.LoadFile("./my-l2tp-config.toml")
# Creation of L2TP instances requires an L2TP context.
# We're disabling logging and using the default Linux data plane.
l2tpctx, _ := l2tp.NewContext(l2tp.LinuxNetlinkDataPlane, nil)
# Create tunnel and session instances based on the config
for _, tcfg := range config.Tunnels {
tunl, _ := l2tpctx.NewStaticTunnel(tcfg.Name, tcfg.Config)
for _, scfg := range tcfg.Sessions {
_, _, := tunl.NewSession(scfg.Name, scfg.Config)
}
}
go-l2tp includes three tools which build on the library.
ql2tpd is a minimal daemon for creating static L2TPv3 sessions.
This tool requires root permissions to run, and is driven by a configuration file which details the tunnel and session instances to create.
Each tunnel may run as a purely static instance. In this mode ql2tpd represents a more convenient way to bring up static sessions than ip l2tp commands.
If a tunnel has a hello_timeout set, the tunnel will send a periodic keep-alive packet over a minimal implementation of the RFC3931 reliable control message transport. This allows for the detection of tunnel failure, which will then tear down the sessions running in that tunnel. hello_timeout should only be enabled if the peer is also running ql2tpd.
kl2tpd is a client/LAC-mode daemon for creating L2TPv2 sessions. It spawns the standard Linux pppd for PPP protocol support.
Similar to ql2tpd, kl2tpd requires root permissions to run, and is driven by a configuration file which details the tunnel and session instances to create.
In addition to the configuration parameters documented by package config, kl2tpd supports an extra session parameter, pppd_args which calls out an argument file for extra pppd command line arguments. Here is an example configuration for establishing a single tunnel containing a single session:
[tunnel.t1]
peer = "42.102.77.204:1701"
version = "l2tpv2"
encap = "udp"
[tunnel.t1.session.s1]
pseudowire = "ppp"
pppd_args = "/home/bob/pppd.args"
kpppoed is a PPPoE daemon for creating L2TPv2 Access Concentrator sessions in response to PPPoE requests. It spawns kl2tpd for L2TP protocol support.
kpppoed uses a minimal configuration file format which calls out the interface to listen on for PPPoE packets, the list of PPPoE services to offer, and the IP address of the LNS to use for establishing L2TPv2 sessions. Here is an example configuration:
ac_name = "kpppoed-1.0"
interface_name = "eth0"
services = [ "myservice" ]
lns_ipaddr = "192.168.1.69:1701"
The go-l2tp library and tools are documented using Go's documentation tool. A top-level description of the various libraries can be viewed as follows:
go doc l2tp
go doc pppoe
go doc config
This top level document provides a summary of the main APIs the library exposes.
You can view documentation of a particular API or type like this:
go doc l2tp.Context
Finally, documentation of various commands like this:
go doc cmd/ql2tpd
go doc cmd/kl2tpd
go doc cmd/kpppoed
go-l2tp has unit tests which can be run using go test:
go test ./...
Some tests instantiate tunnels and sessions in the Linux kernel's L2TP subsystem, and hence require root permissions to run. By default these tests are skipped if run as a normal user.
The tests requiring root can be run as follows:
go test -exec sudo -run TestRequiresRoot ./...
The tests are run using sudo, which will need to be set up for your user, and require the Linux kernel L2TP modules to be loaded.
For the l2tp library tests:
modprobe l2tp_core l2tp_netlink l2tp_eth l2tp_ip l2tp_ip6
And for the pppoe library tests:
modprobe l2tp_ac_pppoe
Depending on your Linux distribution it may be necessary to install an extra package to get the L2TP subsystem modules. For example on Ubuntu:
sudo apt-get install linux-modules-extra-$(uname -r)
The script runtests.sh automates running all the tests (both those requiring root and not) and generates a html test coverage report:
./runtests.sh && firefox ./coverage.html