Bitwig OP1 Controller Script (v0.1)
Special keys have been mapped to mimic the native behaviour on the OP1 as close as possible (see Mapping).
Note:
- In order for the arrow keys to work you need to set the Midi channel to anything above 1 (shift + green knob).
- If the OP1 does not get recognized it may be necessary to unplug and it a few times while Bitwig Studio is running.
Created by @literallylara
Installation
Place op1.control.js into the following directory:
Windows
%USERPROFILE%\Documents\Bitwig Studio\Controller Scripts\teenage-engineering
Mac
~/Documents/Bitwig Studio/Controller Scripts/teenage-engineering
Linux
~/Bitwig Studio/Controller Scripts/teenage-engineering
Mapping
Panels
| Key | Function |
|---|---|
| T1 | Toggle Detail Editor Panel |
| T2 | Toggle Automation Editor Panel |
| T3 | Toggle Device Panel |
| T4 | Toggle Mixer Panel |
| Help | Toggle Inspector Panel |
| Synthesizer | Toggle Device Panel |
| Mixer | Toggle Mixer Panel |
Arranger
| Key | Function |
|---|---|
| Drum Mode | Toggle clip launcher |
| Tape Mode | Toggle timeline |
Transport
| Key | Function |
|---|---|
| Record | Toggle transport record |
| Play | Toggle transport play |
| Stop | Stop transport |
| Metronome | Toggle metronome |
| Lift | Cut if applicable |
| Drop | Paste if applicable |
| Left | Move cursor 1 beat to the left |
| Right | Move cursor 1 beat to the right |
| Left (playing) | Fastforward |
| Right (playing) | Rewind |
| Shift + Left | Lower notes by an octave |
| Shift + Right | Raise notes by an octave |
| 1 (in) | Toggle punch in |
| 2 (out) | Toggle punch out |
| 3 (loop) | Toggle arranger loop |
Miscellaneous
| Key | Function |
|---|---|
| Mic/Input | Toggle browser |
| Arpeggiator | Toggle arpeggiator |
| Shift + Arpeggiator | Cycle arpeggiator modes |