This is a simple autoscaling utility for horizontally scaling Linodes in an LKE Cluster Pool based on memory or cpu usage. This effectively means that you can use Kubernetes' horizontal pod autoscaling to scale up your pods and this utility to scale up your Linodes - so you can set this up and let your cluster scale up or down as needed.
Each instance of this utility will autoscale based on either memory or cpu. To use both, you can deploy 2 instances of this utility (usually 1 is enough).
It's fully dockerised (but written in PHP) and has a low resource footprint, so you can deploy it locally or on the cluster itself.
- Requirements
- Docker Image
- Environment Variables & Configuration
- Usage
- Deploying on Kubernetes for Production Use
- Autoscaler Pod Sizing
- Credits
- Disclaimer
- Linode Kuberenetes Cluster (LKE) with Metrics Server
- A kubectl config file (usually stored @ ~/.kube/config)
- A Linode Personal Access Token with access to LKE
- Docker (recommended) or PHP 7.4 (you'll need to setup env vars on your machine / server before using PHP without Docker)
The image for this utility is published @ Docker Hub as meezaan/linode-k8s-autoscaler (https://hub.docker.com/r/meezaan/linode-k8s-autoscaler).
The latest tag always has the latest code. Also, Docker Hub tags are tied to the tags in this git repository as releases.
The docker container takes all its configuration via environment variables. Here's a list of what each one does:
| Environment Variable Name | Description |
|---|---|
| LINODE_PERSONAL_ACCCESS_TOKEN | Your Personal Access Token with LKE scope |
| LINODE_LKE_CLUSTER_ID | The ID of the LKE Cluster to Autoscale |
| LINODE_LKE_CLUSTER_POOL_ID | The Node Pool ID within the LKE Cluster to Autoscale |
| LINODE_LKE_CLUSTER_POOL_MINIMUM_NODES | The minimum nodes to keep in the cluster. The cluster won't be scaled down below this. |
| AUTOSCALE_TRIGGER | 'cpu' or 'memory' |
| AUTOSCALE_UP_PERCENTAGE | At what percentage of 'cpu' or 'memory' to scale up the node pool. Example: 65 |
| AUTOSCALE_DOWN_PERCENTAGE | At what percentage of 'cpu' or 'memory' to scale down the node pool. Example: 40 |
| AUTOSCALE_QUERY_INTERVAL | How many seconds to wait before each call to the Kubernetes API to check CPU and Memory usage. Example: 10 |
| AUTOSCALE_THRESHOLD_COUNT | After how many consecutive matches of AUTOSCALE_UP_PERCENTAGE or AUTOSCALE_DOWN_PERCENTAGE to scale the cluster up or down. |
| AUTOSCALE_NUMBER_OF_NODES | How many nodes to add or remove at one time when scaling the cluster. Example: 1 or 2 or 3 or N |
| AUTOSCALE_WAIT_TIME_AFTER_SCALING | How many seconds to wait after scaling up or down to start checking CPU and Memory. This should be set the to give the cluster enough time to adjust itself with the updated number of nodes. Example: 150 |
To understand the above assuming we have set the following values.
- AUTOSCALE_TRIGGER=memory
- AUTOSCALE_UP_PERCENTAGE=65
- AUTOSCALE_UP_PERCENTAGE=30
- AUTOSCALE_QUERY_INTERVAL=10
- AUTOSCALE_THRESHOLD_COUNT=3
- AUTOSCALE_NUMBER_OF_NODES=1
- AUTOSCALE_WAIT_TIME_AFTER_SCALING=180
With this setup, the autoscaler utility will query the Kuberenetes API every 10 seconds. If with 3 consecutive calls to the API (effectively meaning over 30 seconds), the memory usage is higher than 65%, 1 more node will be added to the specified node pool. The utility will wait for 180 seconds and then start querying the API every 10 seconds again.
If with 3 consecutive calls to the API (effectively meaning over 30 seconds), the memory usage is lower than 30%, 1 node will be removed from the specified node pool. The utility will wait for 180 seconds and then start querying the API every 10 seconds again.
You'll need to configure the Docker image with env variables and the kubectl config.
To run locally:
docker run -v ~/.kube/config:/root/.kube/config \
-e LINODE_PERSONAL_ACCCESS_TOKEN='xxxx' \
-e LINODE_LKE_CLUSTER_ID='xxxx' \
-e LINODE_LKE_CLUSTER_POOL_ID='xxxx' \
-e LINODE_LKE_CLUSTER_POOL_MINIMUM_NODES='3' \
-e AUTOSCALE_TRIGGER='cpu' \
-e AUTOSCALE_UP_PERCENTAGE='60' \
-e AUTOSCALE_DOWN_PERCENTAGE='30' \
-e AUTOSCALE_QUERY_INTERVAL='10' \
-e AUTOSCALE_THRESHOLD_COUNT='3' \
-e AUTOSCALE_NUMBER_OF_NODES='1' \
-e AUTOSCALE_WAIT_TIME_AFTER_SCALING='180' meezaan/linode-k8s-autoscaler
For production, you can build a private Docker image and push a kubectl config file with a service account's credentials into the image. So, your Dockerfile may look something like:
FROM meezaan/linode-k8s-autoscaler
COPY configfile /root/.kube/config
Once you've built the image (and let's assume it's called yourspace/k8s-autoscaler:latest), you can deploy it with the following manifest:
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: k8s-autoscaler
namespace: name-of-namespace ####### Change this to the actual namespace
spec:
replicas: 1
strategy:
type: RollingUpdate
rollingUpdate:
maxSurge: 1
maxUnavailable: 0
selector:
matchLabels:
app: k8s-autoscale
template:
metadata:
labels:
app: k8s-autoscale
spec:
imagePullSecrets:
- name: regcred ####### Docker registry credentials secret
containers:
- name: k8s-autoscale
image: yourspace/k8s-autoscaler:latest ####### CHANGE THIS TO YOUR ACTUAL DOCKER IMAGE
env:
- name: LINODE_PERSONAL_ACCCESS_TOKEN
valueFrom:
secretKeyRef:
name: linode-personal-access-token-k8s-autoscaler ####### LINODE PERSONAL ACCESS TOKEN SECRET
key: token
- name: LINODE_LKE_CLUSTER_ID
value: ""
- name: LINODE_LKE_CLUSTER_POOL_ID
value: ""
- name: AUTOSCALE_TRIGGER
value: "memory"
- name: AUTOSCALE_UP_PERCENTAGE
value: "60"
- name: AUTOSCALE_DOWN_PERCENTAGE
value: "30"
- name: AUTOSCALE_QUERY_INTERVAL
value: "30"
- name: AUTOSCALE_THRESHOLD_COUNT
value: "3"
- name: AUTOSCALE_NUMBER_OF_NODES
value: "1"
- name: AUTOSCALE_WAIT_TIME_AFTER_SCALING
value: "150"
resources:
requests:
memory: 32Mi
limits:
memory: 32Mi
The above manifest uses a secret for your Linode Personal Access Token and docker registry credentials.
You will need to create these.
The above pod takes 0.01 CPU and 15MB of memory to run. The memory may increase based on the size of the API response, but it returns JSON, so even if you have 100+ servers in your cluster you're still only looking at 30MB or so.
- https://github.com/travisghansen/kubernetes-client-php
- https://github.com/guzzle/guzzle
- https://github.com/Seldaek/monolog
- The Linode API - https://developers.linode.com/api/v4/lke-clusters
- This utility has been built for https://islamic.network
This utility is not affiliated with Linode.