Welcome to the DIY 3D Printer called Rook!
This is a tiny mostly 3d printed CoreXY printer with a build volume of 120x120
PLEASE NOTE THIS PRINTER IS A WORK IN PROGRESS!
The goal of this printer is to make a cheap easy to build 3D printer than can be built by anyone.
Features:
- 3D Printed Frame
- CoreXY
- Dual Lead Screws
- Only Roughly $260 USD in cost
Build F.A.Q
- I print with 3 walls and 15 percent infill, if you want stronger go 4 walls 20 percent infill should be plenty
- I use PLA-PRO for the prototype and it worked well, ABS and ASA wold be great too
- My Discord server has alot of mods for the Rook check it out
- This printer uses some heatset inserts in key places
- This printer uses all F695 bearings now no more 20t idlers
- There are slots in the motor mounts to tension the belts
BOM
https://docs.google.com/spreadsheets/d/1oHDEvndkkvPFOBis4atrHRHK_DMTvttFUFWDg2He6To/edit#gid=0
Videos on Youtube https://www.youtube.com/playlist?list=PLypdl9fsWkKeaa7d5Pv2bP5feIVcw-To2
Support me on Patreon https://www.patreon.com/rolohaun