lgs / k3sup

bootstrap Kubernetes with k3s over SSH < 1 min ๐Ÿš€

Home Page:https://k3sup.dev

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

k3sup ๐Ÿš€ (said 'ketchup')

k3sup logo

k3sup is a light-weight utility to get from zero to KUBECONFIG with k3s on any local or remote VM. All you need is ssh access and the k3sup binary to get kubectl access immediately.

The tool is written in Go and is cross-compiled for Linux, Windows, MacOS and even on Raspberry Pi.

How do you say it? Ketchup, as in tomato.

Sponsor this build Go Report Card GoDoc License: MIT Downloads


What's this for? ๐Ÿ’ป

This tool uses ssh to install k3s to a remote Linux host. You can also use it to join existing Linux hosts into a k3s cluster as agents. First, k3s is installed using the utility script from Rancher, along with a flag for your host's public IP so that TLS works properly. The kubeconfig file on the server is then fetched and updated so that you can connect from your laptop using kubectl.

You may wonder why a tool like this needs to exist when you can do this sort of thing with bash.

k3sup was developed to automate what can be a very manual and confusing process for many developers, who are already short on time. Once you've provisioned a VM with your favourite tooling, k3sup means you are only 60 seconds away from running kubectl get pods on your own computer. If you are a local computer, you can bypass SSH with k3sup install --local

Do you love k3sup?

k3sup is free and open source, but requires time and effort to support users and build and test new features. Support this project via GitHub Sponsors.

The project is funded through GitHub Sponsors, and you can join today.

Sponsor this project

Which tier or option is right for you? Find out now


  • Bootstrap Kubernetes with k3s onto any VM with k3sup install - either manually, during CI or through cloud-init
  • Get from zero to kubectl with k3s on Raspberry Pi (RPi), VMs, AWS EC2, Packet bare-metal, DigitalOcean, Civo, Scaleway, and others
  • Build a HA, multi-master (server) cluster
  • Fetch the KUBECONFIG from an existing k3s cluster
  • Join nodes into an existing k3s cluster with k3sup join

Bootstrapping Kubernetes

Conceptual architecture Conceptual architecture, showing k3sup running locally against any VM such as AWS EC2 or a VPS such as DigitalOcean.

Download k3sup (tl;dr)

k3sup is distributed as a static Go binary. You can use the installer on MacOS and Linux, or visit the Releases page to download the executable for Windows.

curl -sLS https://get.k3sup.dev | sh
sudo install k3sup /usr/local/bin/

k3sup --help

A note for Windows users

Windows users can use k3sup install and k3sup join with a normal "Windows command prompt".

Demo ๐Ÿ“ผ

In the demo I install Kubernetes (k3s) onto two separate machines and get my kubeconfig downloaded to my laptop each time in around one minute.

  1. Ubuntu 18.04 VM created on DigitalOcean with ssh key copied automatically
  2. Raspberry Pi 4 with my ssh key copied over via ssh-copy-id

Watch the demo:


Who is the author? ๐Ÿ‘

k3sup is Open Source Software (OSS) and was created by Alex Ellis - the founder of OpenFaaS ยฎ & inlets. Alex is also an active part of the Docker & Kubernetes community as a CNCF Ambassador.

If you've benefitted from his open source projects or blog posts in some way, then and join dozens of other developers today by buying an Insiders Subscription ๐Ÿ† via GitHub Sponsors.

Usage โœ…

The k3sup tool is a client application which you can run on your own computer. It uses SSH to connect to remote servers and creates a local KUBECONFIG file on your disk. Binaries are provided for MacOS, Windows, and Linux (including ARM).

Pre-requisites for k3sup servers and agents

Some Linux hosts are configured to allow sudo to run without having to repeat your password. For those which are not already configured that way, you'll nee to make the following changes if you wish to use k3sup:

# sudo visudo

# Then add to the bottom of the file
# replace "alex" with your username i.e. "ubuntu"

In most circumstances, cloud images for Ubuntu and other distributions will not require this step.

As an alternative, if you only need a single server you can log in interactively and run k3sup install --local instead of using SSH.

๐Ÿ‘‘ Setup a Kubernetes server with k3sup

You can setup a server and stop here, or go on to use the join command to add some "agents" aka nodes or workers into the cluster to expand its compute capacity.

Provision a new VM running a compatible operating system such as Ubuntu, Debian, Raspbian, or something else. Make sure that you opt-in to copy your registered SSH keys over to the new VM or host automatically.

Note: You can copy ssh keys to a remote VM with ssh-copy-id user@IP.

Imagine the IP was and the username was ubuntu, then you would run this:

  • Run k3sup:
export IP=
k3sup install --ip $IP --user ubuntu

# Or use a hostname and SSH key for EC2
export HOST="ec2-3-250-131-77.eu-west-1.compute.amazonaws.com"
k3sup install --host $HOST --user ubuntu \
  --ssh-key $HOME/ec2-key.pem

Other options for install:

  • --cluster - start this server in clustering mode using embedded etcd (embedded HA)
  • --skip-install - if you already have k3s installed, you can just run this command to get the kubeconfig
  • --ssh-key - specify a specific path for the SSH key for remote login
  • --local-path - default is ./kubeconfig - set the file where you want to save your cluster's kubeconfig. By default this file will be overwritten.
  • --merge - Merge config into existing file instead of overwriting (e.g. to add config to the default kubectl config, use --local-path ~/.kube/config --merge).
  • --context - default is default - set the name of the kubeconfig context.
  • --ssh-port - default is 22, but you can specify an alternative port i.e. 2222
  • --k3s-extra-args - Optional extra arguments to pass to k3s installer, wrapped in quotes, i.e. --k3s-extra-args '--no-deploy traefik' or --k3s-extra-args '--docker'. For multiple args combine then within single quotes --k3s-extra-args '--no-deploy traefik --docker'.
  • --k3s-version - set the specific version of k3s, i.e. v1.21.1
  • --k3s-channel - set a specific version of k3s based upon a channel i.e. stable
  • --ipsec - Enforces the optional extra argument for k3s: --flannel-backend option: ipsec
  • --print-command - Prints out the command, sent over SSH to the remote computer
  • --datastore - used to pass a SQL connection-string to the --datastore-endpoint flag of k3s. You must use the format required by k3s in the Rancher docs.

See even more install options by running k3sup install --help.

  • Now try the access:
export KUBECONFIG=`pwd`/kubeconfig
kubectl get node

Note that you should always use pwd/ so that a full path is set, and you can change directory if you wish.

Merging clusters into your KUBECONFIG

You can also merge the remote config into your main KUBECONFIG file $HOME/.kube/config, then use kubectl config get-contexts or kubectx to manage it.

The default "context" name for the remote k3s cluster is default, however you can override this as below.

For example:

k3sup install \
  --ip $IP \
  --user $USER \
  --merge \
  --local-path $HOME/.kube/config \
  --context my-k3s

Here we set a context of my-k3s and also merge into our main local KUBECONFIG file, so we could run kubectl config set-context my-k3s or kubectx my-k3s.

๐Ÿ˜ธ Join some agents to your Kubernetes server

Let's say that you have a server, and have already run the following:

export SERVER_IP=
export USER=root

k3sup install --ip $SERVER_IP --user $USER

Next join one or more agents to the cluster:

export AGENT_IP=

export SERVER_IP=
export USER=root

k3sup join --ip $AGENT_IP --server-ip $SERVER_IP --user $USER

Please note that if you are using different usernames for SSH'ing to the agent and the server that you must provide the username for the server via the --server-user parameter.

That's all, so with the above command you can have a two-node cluster up and running, whether that's using VMs on-premises, using Raspberry Pis, 64-bit ARM or even cloud VMs on EC2.

Create a multi-master (HA) setup with external SQL

The easiest way to test out k3s' multi-master (HA) mode with external storage, is to set up a Mysql server using DigitalOcean's managed service.

  • Get the connection string from your DigitalOcean dashboard, and adapt it





Note that we've removed ?ssl-mode=REQUIRED and wrapped the host/port in tcp().

export DATASTORE="mysql://doadmin:80624d3936dfc8d2e80593@tcp(db-mysql-lon1-90578-do-user-6456202-0.a.db.ondigitalocean.com:25060)/defaultdb

You can prefix this command with two spaces, to prevent it being cached in your bash history.

Generate a token used to encrypt data (If you already have a running node this can be retrieved by logging into a running node and looking in /var/lib/rancher/k3s/server/token)

# Best option for a token:
export TOKEN=$(openssl rand -base64 64)

# Fallback for no openssl, on a Linux host:
export TOKEN=$(tr -dc A-Za-z0-9 </dev/urandom | head -c 64)

# Failing that, then try:
export TOKEN=$(head -c 64 /dev/urandom|shasum| cut -d - -f 1)
  • Create three VMs

Imagine we have the following three VMs, two will be servers, and one will be an agent.

export SERVER1=
export SERVER2=
export AGENT1=
  • Install the first server
k3sup install --user root --ip $SERVER1 --datastore="${DATASTORE}" --token=${TOKEN}
  • Install the second server
k3sup install --user root --ip $SERVER2 --datastore="${DATASTORE}" --token=${TOKEN}
  • Join the first agent

You can join the agent to either server, the datastore is not required for this step.

k3sup join --user root --server-ip $SERVER1 --ip $AGENT1

Please note that if you are using different usernames for SSH'ing to the agent and the server that you must provide the username for the server via the --server-user parameter.

  • Additional steps

If you run kubectl get node, you'll now see two masters/servers and one agent, however, we joined the agent to the first server. If the first server goes down, the agent will effectively also go offline.

kubectl get node

NAME              STATUS                        ROLES    AGE     VERSION
k3sup-1           Ready                         master   73s     v1.19.6+k3s1
k3sup-2           Ready                         master   2m31s   v1.19.6+k3s1
k3sup-3           Ready                         <none>   14s     v1.19.6+k3s1

There are two ways to prevent a dependency on the IP address of any one host. The first is to create a TCP load-balancer in the cloud of your choice, the second is for you to create a DNS round-robbin record, which contains all of the IPs of your servers.

In your DigitalOcean dashboard, go to the Networking menu and click "Load Balancer", create one in the same region as your Droplets and SQL server. Select your two Droplets, i.e. and, and use TCP with port 6443.

If you want to run k3sup join against the IP of the LB, then you should also add TCP port 22

Make sure that the health-check setting is also set to TCP and port 6443. Wait to get your IP, mine was:

Save the LB into an environment variable:

export LB=

Now use ssh to log into both of your servers, and edit their config files at /etc/systemd/system/k3s.service, update the lines --tls-san and the following address, to that of your LB:

ExecStart=/usr/local/bin/k3s \
    server \
        '--tls-san' \
        '' \


ExecStart=/usr/local/bin/k3s \
    server \
        '--tls-san' \
        '' \

Now run:

sudo systemctl daemon-reload && \
  sudo systemctl restart k3s-agent

And repeat these steps on the other server.

You can update the agent manually, via ssh and edit /etc/systemd/system/k3s-agent.service.env on the host, or use k3sup join again, but only if you added port 22 to your LB:

k3sup join --user root --server-ip $LB --ip $AGENT1

Finally, regenerate your KUBECONFIG file with the LB's IP, instead of one of the servers:

k3sup install --skip-install --ip $LB

Log into the first server, and stop k3s sudo systemctl stop k3s, then check that kubectl still functions as expected:

export KUBECONFIG=`pwd`/kubeconfig
kubectl get node -o wide

NAME              STATUS                        ROLES    AGE   VERSION
k3sup-1           NotReady                      master   23m   v1.19.6+k3s1
k3sup-2           Ready                         master   25m   v1.19.6+k3s1
k3sup-3           Ready                         <none>   22m   v1.19.6+k3s1

You've just simulated a failure of one of your masters/servers, and you can still access kubectl. Congratulations on building a resilient k3s cluster.

Create a multi-master (HA) setup with embedded etcd

In k3s v1.19.5+k3s1 a HA multi-master (multi-server in k3s terminology) configuration is available called "embedded etcd". A quorum of servers will be required, which means having an odd number of nodes and least three. See more

  • Initialize the cluster with the first server

Note the --cluster flag

export SERVER_IP=
export USER=root

k3sup install \
  --ip $SERVER_IP \
  --user $USER \
  --cluster \
  --k3s-version v1.19.1+k3s1
  • Join each additional server

Note the new --server flag

export USER=root
export SERVER_IP=

k3sup join \
  --ip $NEXT_SERVER_IP \
  --user $USER \
  --server-user $USER \
  --server-ip $SERVER_IP \
  --server \
  --k3s-version v1.19.1+k3s1

Now check kubectl get node:

kubectl get node
NAME              STATUS   ROLES    AGE     VERSION
paprika-gregory   Ready    master   8m27s   v1.19.2-k3s
cave-sensor       Ready    master   27m     v1.19.2-k3s

๐Ÿ‘จโ€๐Ÿ’ป Micro-tutorial for Raspberry Pi (2, 3, or 4) ๐Ÿฅง

In a few moments you will have Kubernetes up and running on your Raspberry Pi 2, 3 or 4. Stand by for the fastest possible install. At the end you will have a KUBECONFIG file on your local computer that you can use to access your cluster remotely.

Conceptual architecture, showing k3sup running locally against bare-metal ARM devices.

  • Download etcher.io for your OS

  • Flash an SD card using Raspbian Lite

  • Enable SSH by creating an empty file named ssh in the boot partition

  • Generate an ssh-key if you don't already have one with ssh-keygen (hit enter to all questions)

  • Find the RPi IP with ping -c raspberrypi.local, then set export SERVER_IP="" with the IP

  • Enable container features in the kernel, by editing /boot/cmdline.txt (or /boot/firmware/cmdline.txt on Ubuntu)

  • Add the following to the end of the line: cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory

  • Copy over your ssh key with: ssh-copy-id pi@raspberrypi.local

  • Run k3sup install --ip $SERVER_IP --user pi

  • Point at the config file and get the status of the node:

export KUBECONFIG=`pwd`/kubeconfig
kubectl get node -o wide

You now have kubectl access from your laptop to your Raspberry Pi running k3s.

If you want to join some nodes, run export IP="" for each additional RPi, followed by:

  • k3sup join --ip $IP --server-ip $SERVER_IP --user pi

Remember all these commands are run from your computer, not the RPi.

Now where next? I would recommend my detailed tutorial where I spend time looking at how to flash the SD card, deploy k3s, deploy OpenFaaS (for some useful microservices), and then get incoming HTTP traffic.

Try it now: Will it cluster? K3s on Raspbian

Caveats on security

If you are using public cloud, then make sure you see the notes from the Rancher team on setting up a Firewall or Security Group.

k3s docs: k3s configuration / open ports

If your ssh-key is password-protected

If the ssh-key is encrypted the first step is to try to connect to the ssh-agent. If this works, it will be used to connect to the server. If the ssh-agent is not running, the user will be prompted for the password of the ssh-key.

On most Linux systems and MacOS, ssh-agent is automatically configured and executed at login. No additional actions are required to use it.

To start the ssh-agent manually and add your key run the following commands:

eval `ssh-agent`
ssh-add ~/.ssh/id_rsa

You can now just run k3sup as usual. No special parameters are necessary.

k3sup --ip $IP --user user


Sponsor on GitHub โ˜•๏ธ ๐Ÿ‘

k3sup is free and open source, but requires time and effort to support users and build and test new features. Support this project via GitHub Sponsors.

Blog posts & tweets

Blogs posts, tutorials, and Tweets about k3sup (#k3sup) are appreciated. Please send a PR to the README.md file to add yours.

Contributing via GitHub

Before contributing code, please see the CONTRIBUTING guide. Note that k3sup uses the same guide arkade

Both Issues and PRs have their own templates. Please fill out the whole template.

All commits must be signed-off as part of the Developer Certificate of Origin (DCO)



๐Ÿ“ข What are people saying about k3sup?

Checkout the Announcement tweet

Similar tools & glossary


  • Kubernetes: master/slave
  • k3s: server/agent

Related tools:

  • k3s - Kubernetes as installed by k3sup. k3s is a compliant, light-weight, multi-architecture distribution of Kubernetes. It can be used to run Kubernetes locally or remotely for development, or in edge locations.
  • k3d - this tool runs a Docker container on your local laptop with k3s inside
  • kind - kind can run a Kubernetes cluster within a Docker container for local development. k3s is also suitable for this purpose through k3d. KinD is not suitable for running a remote cluster for development.
  • kubeadm - a tool to create fully-loaded, production-ready Kubernetes clusters with or without high-availability (HA). Tends to be heavier-weight and slower than k3s. It is aimed at cloud VMs or bare-metal computers which means it doesn't always work well with low-powered ARM devices.
  • k3v - "virtual kubernetes" - a very early PoC from the author of k3s aiming to slice up a single cluster for multiple tenants
  • k3sup-multipass - a helper to launch single node k3s cluster with one command using a multipass VM and optionally proxy the ingress to localhost for easier development.


If you're having issues, it's likely that this is a problem with K3s, and not with K3sup. How do we know that? Mostly from past issues.

Rancher provides support for K3s on their Slack in the #k3s channel. This should be your first port of call. Your second port of call is to raise an issue with the K3s maintainers in the K3s repo

Do you want to install a specific version of K3s? See k3sup install --help and the --k3s-version and --k3s-channel flags.

Is your system ready to run Kubernetes? K3s requires certain Kernel modules to be available, run k3s check-config and check the output. As a rule Raspberry Pi OS and Ubuntu 20.04 are compatible.

Common issues:

The most common problem is that you missed a step, fortunately it's relatively easy to get the logs from the K3s service and it should tell you what's wrong.

  • For the Raspberry Pi you probably haven't updated cmdline.txt to enable cgroups for CPU and memory. Update it as per the instructions in this file.

  • You ran kubectl on a node. Don't do this. k3sup copies the file to your local workstation. Don't log into agents or servers other than to check logs / upgrade the system.

  • sudo: a terminal is required to read the password - see the Pre-requisites for k3sup agents and servers

  • K3s server didn't start. Log in and run sudo systemctl status k3s or sudo journalctl -u k3s to see the logs for the service.

  • The K3s agent didn't start. Log in and run sudo systemctl status k3s-agent

  • You tried to remove and re-add a server in an etcd cluster and it failed. This is a known issue, see the K3s issue tracker.

  • You tried to use an unsupported version of a database for HA. See this list from Rancher

  • Your tried to join a node to the cluster and got an error "ssh: handshake failed". This is probably one of three possibilities:

    • You did not run ssh-copy-id. Try to run it and check if you can log in to the server and the new node without a password prompt using regular ssh.
    • You have an RSA public key. There is an underlying issue in a Go library which is referred here. Please provide the additional parameter --ssh-key ~/.ssh/id_rsa (or wherever your private key lives) until the issue is resolved.
    • You are using different usernames for SSH'ing to the server and the node to be added. In that case, playe provide the username for the server via the --server-user parameter.

Finally, if everything points to an issue that you can clearly reproduce with k3sup, feel free to open an issue here. To make sure you get a response, fill out the whole template and answer all the questions.

Getting access to your KUBECONFIG

You may have run into an issue where sudo access is required for kubectl access.

You should not run kubectl on your server or agent nodes. k3sup is designed to rewrite and/or merge your cluster's config to your local KUBECONFIG file. You should run kubectl on your laptop / client machine.

If you've lost your kubeconfig, you can use k3sup install --skip-install. See also the various flags for merging and setting a context name.

Smart cards and 2FA

Warning: issues requesting support for smart cards / 2FA will be closed immediately. The feature has been proven to work, and is provided as-is. We do not have time to debug your system.

You can use a smart card or 2FA security key such as a Yubikey. You must have your ssh-agent configured correctly, at that point k3sup will defer to the agent to make connections on MacOS and Linux. Find out more

Misc note on iptables

Note added by Eduardo Minguez Perez

Currently there is an issue in k3s involving iptables >= 1.8 that can affect the network communication. See the k3s issue and the corresponding kubernetes one for more information and workarounds. The issue has been observed in Debian Buster but it can affect other distributions as well.


bootstrap Kubernetes with k3s over SSH < 1 min ๐Ÿš€




Language:Go 89.0%Language:Shell 8.9%Language:Makefile 2.1%