lgnq's starred repositories
qmk_firmware
Open-source keyboard firmware for Atmel AVR and Arm USB families
minipad-firmware
The Firmware of the minipad, a Hall Effect keypad with osu! and Rapid Trigger in mind.
storm32bgc
3-axis Brushless Gimbal Controller, based on STM32 32-bit microcontroller
nano_stepper
Stepper feedback controller
MKS-SERVO42B
MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F103C8T6 ARM 32-bit Cortex™-M3 CPU Core,72 MHz. Magnetic encoder is Allegro's A1333LLETR-T Contactless 0° to 360° angle sensor IC ,12bit .This Project open source hardware and code,support platformio build and upload firmware...
Esp32_oscilloscope
ESP32 oscilloscope - see the signals through Web browser the way ESP32 sees them
mr-library
mr-library is a lightweight framework designed for embedded systems. The resource and performance requirements of embedded system are fully considered. Providing standardized open (open), close (close), control (ioctl), read (read), write (write) and other interfaces.
Hikvision-DS1004KI
Hikvision DS-1004KI PTZ Keyboard - Reprogram
serialplot
Small and simple software for plotting data from serial port in realtime.
Speech-Translate
A realtime speech transcription and translation application using Whisper OpenAI and free translation API. Interface made using Tkinter. Code written fully in Python.
Magnetic_rotary_encoding
A library for setting up magnetic rotary encoding in C/C++ & MicroPython, The library also features a haptics controller which allows you to connect and control a vibration motor as a step count haptic feedback.
PS4SysconTools
PS4 Syscon Tools is a free solution that allow you to manipulate original PlayStation 4 Syscon chip (Renesas RL78/G13).
3DUNDERWORLD-SLS-GPU_CPU
A structured light scanner
libfreenect2
Open source drivers for the Kinect for Windows v2 device
QMC5883LCompass
QMC5883L Compass is a Arduino library for using QMC5583L series chip boards as a compass. Supports: - Getting values of XYZ axis. - Calculating Azimuth. - Getting 16 point Azimuth bearing direction (0 - 15). - Getting 16 point Azimuth bearing Names (N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW) - Smoothing of XYZ readings via rolling averaging and min / max removal. - Optional chipset modes