Copyright (C) Sony Mobile Communication 2012 ============================================ This is the Android device configuration for Xperia S. To setup a tree and build images for the device do the following: repo init as described by Google over at: http://source.android.com/source/downloading.html Put the following snippet in .repo/local_manifest.xml <?xml version="1.0" encoding="UTF-8"?> <manifest> <remote name="sony" fetch="git://github.com/sonyxperiadev/" /> <remove-project name="device/sony/lt26" /> <project path="device/sony/lt26" name="device-sony-lt26" remote="sony" revision="master" /> </manifest> Download the zip file with vendor binaries from: http://developer.sonymobile.com/downloads/tool/software-binaries-for-xperia-s/ In the root of your Android code tree unzip the SW_binaries_for_Xperia_S_v1.tar.zip, you should now have a directory named vendor/sony/lt26 in your tree. repo sync lunch full_lt26-userdebug make To flash the images produced make sure your device is unlocked, as described on http://unlockbootloader.sonymobile.com/ Enter fastboot mode on the device by pressing volume up while inserting the USB cable or execute adb reboot bootloader. fastboot flash userdata out/target/product/lt26/userdata.img fastboot flashall Reflashing userdata is not necessary every time, but incompatibilities with previous content might result in a device that doesn't boot. If this happens try to reflash just the userdata again.