به مرور آپدیت میگردد هر مشکلی بود لطفا از طریق تلگرام یا گیتهاب اطلاع بدید
Tlegram Channel https://t.me/opiranv2rayproxy
Gap Group https://t.me/OPIranClub
to use this script ssh to your vps with root previllage then copy below ink and paste it to shell
وظایف زیر را انجام می دهد:
- Update, Upgrade, and Clean the server. Install Useful Packages.
- Enable Packages at Server Boot.
- Create & Enable SWAP File. (Default is 2Gb)
- Enable IPv6 Support.
- Clean the Old SYSCTL Settings. Optimize the SYSCTL Settings.
- SWAP
- Network
- BBR & hybla Optimize SSH.
- Back up the original sshd_config file
- Disable DNS lookups for connecting clients
- Enable compression for SSH connections
- Remove less efficient encryption ciphers
- Enable and Configure TCP keep-alive messages
- Allow agent forwarding
- Allow TCP forwarding
- Enable gateway ports
- Enable tunneling Optimize the System Limits.
- nproc
- nofile Optimize UFW & Open Common Ports. Reboot at the end.
- Ubuntu server (16+) with root access.
- curl
sudo apt install -y curl
bash <(curl -s https://raw.githubusercontent.com/opiran-club/VPS-Optimizer/main/optimizer.sh --ipv4)
- Added C.F Warp/Wiregaurd
bash <(curl -s https://raw.githubusercontent.com/opiran-club/VPS-Optimizer/main/optimizer+warp.sh --ipv4)
با دستور زیر
rm -rf /etc/resolv.conf && touch /etc/resolv.conf && echo 'nameserver 8.8.8.8' >> /etc/resolv.conf && echo 'nameserver 8.8.4.4' >> /etc/resolv.conf
yum install -y wget curl python python3 nano
نصب و حذف تنظیمات با دستور زیر
bash <(curl -Ls https://raw.githubusercontent.com/OPIran-CluB/VPS-Optimizer/main/Tweaker.sh --ipv4)
دستور زیر را اجرا کنید:
nano /etc/security/limits.conf
دو خط زیر را به انتهای فایل باز شده اضافه کنید.
* soft nofile 51200
* hard nofile 51200
به ترتیب با زدن دکمه‌های ctrl + x و y و enter تغییرات را ذخیره کرده و فایل را ببندید. و دستور زیر را اجرا کنید:
ulimit -n 51200
دستور زیر را اجرا کنید:
nano /etc/sysctl.conf
خطوط زیر را در انتهای فایل اضافه کنید:
fs.file-max = 51200
net.core.netdev_max_backlog = 250000
net.core.rmem_max = 67108864
net.core.somaxconn = 4096
net.core.wmem_max = 67108864
net.ipv4.ip_forward=1
net.ipv4.ip_local_port_range = 10000 65000
net.ipv4.tcp_congestion_control = hybla
net.ipv4.tcp_fastopen = 3
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 1200
net.ipv4.tcp_max_syn_backlog = 8192
net.ipv4.tcp_max_tw_buckets = 5000
net.ipv4.tcp_mem = 25600 51200 102400
net.ipv4.tcp_mtu_probing = 1
net.ipv4.tcp_rmem = 4096 87380 67108864
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_tw_recycle = 0
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_wmem = 4096 65536 67108864
wget "https://github.com/cx9208/bbrplus/raw/master/ok_bbrplus_centos.sh" && chmod +x ok_bbrplus_centos.sh && ./ok_bbrplus_centos.sh
first you need install snap core in centos
yum install epel-release -y && install snapd -y
systemctl enable --now snapd.socket
ln -s /var/lib/snapd/snap /snap
snap install core && snap refresh core
now you can install anything with this "snap install"
با دستور زیر
bash <(curl -Ls https://raw.githubusercontent.com/OPIran-CluB/VPS-Optimizer/main/UDPGW.sh --ipv4)
bash <(curl -Ls https://raw.githubusercontent.com/OPIran-CluB/VPS-Optimizer/main/Dropbear.sh --ipv4)
با دستور زیر
bash <(curl -Ls https://raw.githubusercontent.com/OPIran-CluB/VPS-Optimizer/main/Stunnel.sh --ipv4)
dpkg-reconfigure tzdata
bash <(curl -Ls https://raw.githubusercontent.com/OPIran-CluB/VPS-Optimizer/main/Docker-DockerCompose.sh --ipv4)
wget --no-check-certificate https://raw.githubusercontent.com/cloudstarry/google-bbr/master/bbrvz.sh && bash bbrvz.sh
then to Change Speed up for specific Port Range:
nano /root/lkl/run.sh
and search for 9000-9999 and change it optioanally then if you have Natvps select your range
nano /root/lkl/haproxy.cfg
and search for 9000-9999 and change it optioanally if you have Natvps select your range