SUMMARY ======= A small Python daemon that communicates with a Jeenode or Jeelink that receives data from a remote weather station. The weather data is collected by a standard instance of https://www.sevenwatt.com/main/wh1080-protocol-v2-fsk/ and then relayed onto the serial port. This daemon collects the data, splits it up, and relays it onto the MQTT bus using any message topic that you wish to configure. It is ideally paired with the included weatherstationFSK Arduino sketch courtesy of https://www.sevenwatt.com/main/wh1080-protocol-v2-fsk/ who appears to have released it under the MIT license. Make sure you follow the attached readme too. INSTALL ======= apt-get install python-serial git python-mosquitto mkdir /usr/local/mqtt-weatherstation/ /etc/mqtt-weatherstation/ cd /usr/local/ git clone git://github.com/kylegordon/mqtt-weatherstation.git cp mqtt-weatherstation.cfg.example /etc/mqtt-weatherstation/mqtt-weatherstation.cfg # Edit the above file to suit cp mqtt-weatherstation.init /etc/init.d/mqtt-weatherstation update-rc.d mqtt-weatherstation defaults cp mqtt-weatherstation.default /etc/default/mqtt-weatherstation /etc/init.d/mqtt-weatherstation start