kszakharov / docker-iperf3

iPerf3 in Docker

docker-iperf3

iPerf3 in Docker

# README

This is a simple Dockerfile for setting up an iperf3 server using Alpine Linux.

## Instructions

1. Make sure you have Docker installed.
2. Build the Docker image using the provided Dockerfile.
3. Run the Docker container.

### Build Docker Image
```bash
docker build -t iperf-server .

Run Docker Container

docker run -d -p 5201:5201 --name iperf-server iperf-server

Testing

You can test the iperf3 server by connecting to it from an iperf3 client. For example:

iperf3 -c <server_ip_address>

Replace <server_ip_address> with the IP address of the machine running the Docker container.

Notes

• This Dockerfile uses Alpine Linux as the base image.
• It installs iperf3 and exposes port 5201.
• The default command runs the iperf3 server in server mode.

For more information about iperf3, refer to the iperf documentation.

This README provides instructions for building and running the Docker container with iperf3 server on Alpine Linux, along with notes about the setup.