kortas87 / simple-evse

Automatically exported from code.google.com/p/simple-evse

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

NEWS

24.12.2014


At the moment we are testing new sealed AC/DC converters which should replace the original black 12V 500mA power adapters. The greatest advantage is that these power supply units are small enough to fit in the connector J1772 easily (no need for pushing or changing anything) and they are more or less water resistant (please do not forget that in the connector there are usually other things as well which may cause short if too much of water gets in - e.g. relay contacts)

Project introduction

We have developed a board based on PIC microcontroller which is able to generate 1kHz PWM signal, detect the vehicle and control the relay. It is also possible to adjust PWM width for current regulation. The board is small enough to be installed directly into J1772 Yazaki connector.

The kit can be obtained from EV Power (Czech Republic).

http://evracing.cz/wiki/simple-evse/images/evse-scheme.png

http://evracing.cz/wiki/simple-evse/images/j1772_final_before_covering_400.jpg

EVSE Kit includes

  1. Mounted PCB including microcontroller with latest firmware

http://evracing.cz/wiki/simple-evse/images/board_400.jpg

  1. 12V DC power supply

http://evracing.cz/wiki/simple-evse/images/dc_12V_400.jpg

  1. AC relay 230V 20A

http://evracing.cz/wiki/simple-evse/images/relay_400.jpg

About

Automatically exported from code.google.com/p/simple-evse


Languages

Language:Eagle 98.0%Language:Makefile 1.4%Language:C 0.5%Language:Shell 0.1%