kevinee

Vitis-Tutorials

Vitis In-Depth Tutorials

PyBaMM

Fast and flexible physics-based battery models in Python

PySpice

Simulate electronic circuit using Python and the Ngspice / Xyce simulators

adbDocumentation

Better documentation of the ADB protocol, specifically for USB uses.

python-projects-for-beginners

Source Code for 'Python Projects for Beginners' by Connor Milliken

caravel

Caravel is a standard SoC harness with on chip resources to control and read/write operations from a user-dedicated space.

npTDMS

NumPy based Python module for reading TDMS files produced by LabView

python_labview_automation

riscduino

Arduino compatible Risc-V Based SOC

stm32loader

Flash firmware to STM32 microcontrollers using Python.

open-source-pdks

Index of the fully open source process design kits (PDKs) maintained by Google.

Battery-Pack-Model-Simscape

Battery pack model for thermal management tasks, with modules of cells in series and parallel.

nifpga-python

Python API for LabVIEW FPGA devices

Wi-Fi_Study_Public

The resources of Wi-Fi protocols and resources.

spice3f5

Add cmake to spice3f5 for build in linux or windows. SPICE is a general-purpose circuit simulator with several built-in semiconductor device models. SPICE was developed at the Electronics Research Laboratory of the University of California, Berkeley.

SensSeq

A mixed-signal system on chip for nanopore-based DNA sequencing

Wi-Fi_Study_Public

The resources of Wi-Fi protocols and resources.

LKD

Linux Kernel Driver

rlc_chart

A library that renders impedance charts that include capacitance and inductance grids.

i3c_avip

Verification IP project for I3C protocol

electronics

My personal Electronics projects versioning repo.

7INCH_DSI_DISPLAY

microblaze-pmbus

PMBus protocol driver implementation for Micoblaze processor on Xilinx ML605 FPGA board

6xUSB-Power-Meter

6 USB port Power Meter

AwesomeStudyResource

some learning resources in JLU CCST.

USB-UART-I2C-Debugger

USB UART/I2C Debugger comprises a chip that supports full-speed USB (12 Mb/s). It runs I2C with up to 400 kHz clock rates. The UART baud rates come between 300 and 460800. It can operate on 3.3V or 5V logic levels via selection jumper.

i2cx-gui

I²Cx Cyber Range graphical user interface

oscilloscope-based-on-raspberrypi-Qt5-

A project based on raspberrypi to creat an oscilloscope

beep-integration-scripts

DatasheetExtractor

Tool to extract data from electronic component datasheet