ビルドガイドはこちら
BuildGuide is here
Lily58-χ(カイ)はLily58からforkされたLily58-glowに以下の変更を加えたものです。 検索性向上のために，ここ以外ではLily58-Xと表記します。
- RGBLEDのpad配置をSK6812mini-e用に変更
- Underglow用LEDの場所・数を変更
- BLE Micro Proのインジケータ用にLEDを追加
- トラックパッド用のピンヘッダ・ネジ穴を追加
- 縁を覆うようなケースを追加
- I2Cと単線シリアルをスイッチできるようにジャンパーを追加
- TRRSジャックのピンアサインを変更(moduloと同様のピンアサイン)
Lily58-χ(chi) is a forked version of Lily58-glow from Lily58 with the following changes.
- Change RGB LED pad to SK6812mini-e's one.
- Change place and number of LEDs for underglow.
- Add LED for BLE Micro Pro's indicator.
- Add new Pinheader for trackpad modules.
- Add case that can cover edge.
- Add jumber for switching I2C and Serial
- Change TRRS pin assign
このプロジェクトは開発中です。PCBの設計にミスがある可能性があります。 This project is still in progress. There may be some mistakes in PCB design.
| Part Name | Quantity |
|---|---|
| PCB | 2 |
| Top Case,Mid Case,Bottom Case(t2 acrylic) | 2 |
| Pro Micro or BLE Micro Pro | 2 |
| Choc Key Switch | 58 |
| Keycap | 58 |
| SK6812-MINI-E | 58 |
| OLED | 2 |
| Diode 1N4148W | 58 |
| Tact switch | 2 |
| TRRS jack (option for Pro Micro) | 2 |
| TRRS cable (opton for Pro Micro) | 1 |
| M2 screw 10mm | 10 |
| M2 Nut | 20 |
| M2 spacer 10mm | 4 |
| M2 screw 4mm | 8 |
| Urethane cushion | 10 |
| Low profile pin header(1×4 & 1×6) | 2 |
| [option] RKJXY1000006 trackpad with DIP convertPCB | 1 |
| [option] 1608 LED | 1 |
| [option] Constant current diode or resistor | 1 |