kellerza / sunsynk

Deye/Sunsynk Inverter Python library and Home Assistant OS Addon

https://kellerza.github.io/sunsynk/

kellerza/sunsynk Issues

Version b381a73 WARNING use_timer: Unknown register value 255 The Problem
Closed 11 days ago6
Issue with the SOC figure since HA upgraded
Updated 13 days ago20
Possibility of use in sofar 5 ktlm g3?
Closed 13 days ago1
RWSensor System Zero Export power MinMax Value
Closed 13 days ago8
Integration hangs regularly on reading/writing data
Closed 13 days ago18
Parameter settings for example ss_prog_power enters multiples of values instead of 1000 enters 10 000
Closed 13 days ago6
Charge Amps
Updated a month ago13
Addon reading incorrect data after connection is lost
Updated a month ago5
USR-W630 IncompleteReadError
Closed a month ago1
grid_connected always OFF: Deye 3-phase
Closed 2 months ago3
Use_timer: Unknown register value 1
Closed 2 months ago9
Slider scaling
Updated 2 months ago3
CRC validation failed: Sofar HYD-5000-EP
Updated 3 months ago5
Wrong values due to Communication problems
Updated 3 months ago2
Data reporting randomly pauses for a couple of minutes
Closed 3 months ago6
Lots of errors
Closed 3 months ago6
sync 3PH LV and HV definitions
Closed 3 months ago
Custom Sensors seems not to work
Closed 3 months ago7
Batterie und RS485 Adapter an der Deye Schnittstelle ? Möglich?
Updated 3 months ago1
Parallel support
Updated 3 months ago1
3 phase Grid Trickle Feed
Closed 3 months ago5
SUN-29.9/30/35/40/50K-SG01HP3-EU
Closed 4 months ago11
Python Error
Closed 3 months ago2
"PV3 Sensor" definition for Sunsynk 16Kw single phase inverter
Closed 3 months ago4
I have just updated sunsynk add on, and am now getting 2 or 3 decimal places for all values.
Updated 4 months ago5
Missing Sunsynk Inverter and Battery Temperature
Closed 4 months ago5
Prog{x} Time select list
Closed 4 months ago5
Unable to successfully connect to Sunsynk inverter
Closed 4 months ago3
seperate battery values
Closed 4 months ago15
Incorrect Grid power, Grid CT power, and Non-Essential power
Closed 4 months ago10
Mbusd Docker Container
Updated 4 months ago6
Standalone, where do I define the USB device?
Closed 4 months ago8
Readings start timing out / corrupting after a few reads
Closed 4 months ago7
Can't install on Docker
Closed 4 months ago3
Confusion over adding PV2 current and voltage sensors
Closed 5 months ago5
UDP support
Closed 5 months ago2
Load port power
Updated 5 months ago6
Upgrading from 0.6.4 to 0.6.5 fails
Closed 6 months ago4
DEBUG_DEVICE not found
Closed 6 months ago15
No connetion to Elfin EW11 Rs485 Wifi Adapter
Closed 6 months ago3
Set battery_max_charge_current based on a template value
Updated 6 months ago2
One inverter - Two Home Assistants
Updated 7 months ago3
Enable Callback stats
Closed 7 months ago1
Deye-12k-SG04LP3-EU 3ph inverter - error handling Low Capacity, use_timer and progX_charge
Updated 7 months ago1
Grid Connected sensor not available for 3-Phase-Inverter
Closed 7 months ago1
Fixed: Timeout reading, spikes in Voltage, Buffer problem?
Closed 7 months ago
Not a bug - request
Closed 8 months ago1
ERROR [sunsynk-multi 3/5] COPY sunsynk sunsynk when trying to create a Docker Image
Closed 9 months ago10
config for multiple inverters
Closed 9 months ago11
Addon writes incorrect values to the modbus registers
Closed 9 months ago4