kartik1507 / hop

HOP

HOP is a prototype hardware implementation on a RISC V processor and Freecursive ORAM to determine the efficiency of obfuscated programs. This document describes how to install and run a program on HOP.

Installing HOP

git clone https://github.com/kartik1507/hop.git

Install the 32 bit RISC-V GNU GCC Compiler Toolchain. This will install the toolchain at /opt/riscv.

cd hop/scripts

./install_riscv_gnu_toolchain.sh

Install Xilinx Vivado 2015.2 - HL WebPack. This will install Vivado at /opt/Xilinx/ and start it for the first time.

./install_vivado

Removing installation files

1. Run ./cleanup.sh to remove build files
2. After a successful Vivado installation, run:

sudo rm /opt/Xilinx/Vivado/2015.2/scripts/init.tcl

Obtaining a free Vivado license

1. Visit Xilinx getlicense webpage
2. Obtain a license for "Vivado Design Suite: HL WebPACK 2015 and Earlier License"
3. In Vivado, install license at Help -> ManageLicense

Compiling and Running HOP

• Compiling a program

cd examples/sum/

../full_compile.sh sum

(the first parameter is the name of the C file without the .c extension)

• Running the program.

Update paths in the first few lines of obfuscation/oram/Top.v to reflect the files in examples/sum/. Run Flow -> Run Simulation -> Run Behavioral Simulation

Developed by

1. Kartik Nayak ([e-mail])
2. Christopher W. Fletcher ([e-mail])
3. Ling Ren ([e-mail])