kanthrajs / SLR-RaspberryPI

shows sea level risk factor of a location from Raspberry PI

This file assumes that you have RaspberryPI and succuessfully runs basic python code.
A brief description of the use of this project is here:

Basic information:

This demo gets the location ip,city from RaspberryPI and detects sealevel-riskfactor.
Data to evaluate riskfactor obtained here: https://firststreet.org/data-access/public-access/

Install from root folder of your project.

1.Installation library:

sudo apt-get update
sudo apt-get install python3-pip
sudo apt-get install python3-pil
sudo pip3 install RPi.GPIO
sudo pip3 install geocoder

2. Preparing from setup.py file:

sudo pip3 install -r requirements.txt
sudo pip3 install .

3. Basic use:

cd slr/
sudo python3 risk_factor.py