kalenarndt / udmp-jumbo-frames

Shell script to configure and monitor the jumbo frame configuration on the UDM Pro

UDMP Monitor MTU

Ubiquiti has added this as a part of the 1.12.13 EA firmware. This repository is now archived

UDMP Monitor MTU is a shell script that checks all VLAN interfaces and LAN SFP+ ports on the UDM Pro and sets them to 9216. This allows for intervlan routing to take place without being fragmented. This runs every 5 seconds but can be modified if you change the sleep values in the script.

Pre-Requisites

UDMP has to have the Boot script installed from this repo https://github.com/boostchicken/udm-utilities/tree/master/on-boot-script

Installation

1. Place the 10-monitor-mtu.sh in /mnt/data/on_boot.d/ folder and mark it as executable
2. Place the 11-change-mtu.sh in the /mnt/data folder and mark it as exectable

chmod +x /mnt/data/on_boot.d/10-monitor-mtu.sh
chmod +x /mnt/data/11-change-mtu.sh

Contributing

Pull requests are welcome. For major changes, please open an issue first to discuss what you would like to change.

Please make sure to update tests as appropriate.

License

MIT