k4m4 / kickthemout

💤 Kick devices off your network by performing an ARP Spoof attack.

https://nikolaskama.me/kickthemoutproject

Repository from Github https://github.comk4m4/kickthemout

k4m4/kickthemout Issues

you are offline when i am online
Updated 5 months ago1
doesn't detect scapy installed and also spoof does nothing
Updated 6 months ago
ERROR: Requirements have not been satisfied properly. Please look at the README file for configuration instructions. If you still cannot resolve this error, please submit an issue here: https://github.com/k4m4/kickthemout/issues Details: No module named 'nmap'
Updated 7 months ago3
Hi, I have problem when run kickthemout.py
Updated a year ago
Wrong type for [hosts], should be a string [was <class 'NoneType'>]
Updated a year ago
Unkickthemout
Updated a year ago
.
Updated a year ago
ERROR: Details: No module named '_ctypes'
Updated a year ago1
ERROR: Failed building wheel for netifaces
Updated a year ago
No module named 'scapy'
Updated a year ago1
Doesn't work
Updated a year ago1
ValueError: ('illegal netmask value', '0x0')
Updated 2 years ago
ERROR: It seems that you are offline. Please check your internet connection.
Closed 2 years ago1
How to undo?
Closed 3 years ago1
after i used bettercap to see the hosts i found that kickthemout doesnt show a few hosts
Updated 2 years ago
Doesn't work.
Updated 2 years ago2
kickthemout
Updated 2 years ago
Network scanning fails. I using void linux and it not very different from arch linux except for the init system.
Updated 2 years ago3
Offline Error + Spoofing does nothing
Updated 2 years ago
ERROR: Gateway IP could not be obtained. Please enter IP manually.
Updated 2 years ago1
ERROR: Gateway IP could not be obtained. Please enter IP manually.
Updated 2 years ago1
Wrong type for [hosts], should be a string [was <class 'NoneType'>
Closed 2 years ago
Always says I am offline even if I am online and sometimes it shows and error
Closed 3 years ago4
what
Updated 2 years ago2
ValueError: max() arg is an empty sequence
Updated 2 years ago
ValueError: max() arg is an empty sequence
Updated 2 years ago1
ValueError: max() arg is an empty sequence
Updated 2 years ago1
ValueError: max() arg is an empty sequence怎么解决
Updated 3 years ago1
it looks like it's off the net
Updated 3 years ago1
No module named 'nmap'
Updated 3 years ago2
Gateway IP could not be obtained
Updated 3 years ago
Can't open
Updated 3 years ago1
??
Updated 3 years ago
How do you fix it and why is this?
Updated 3 years ago1
Why nmap and not nectat?
Updated 3 years ago
So i had the same problem. But the fix is simple:
Updated 3 years ago
Network scanning failed [IMG]
Updated 3 years ago3
issue
Updated 3 years ago
No module named scapy.config
Updated 4 years ago5
network scanning failed
Updated 4 years ago2
Cannot find MAC and IP address
Updated 4 years ago1
Re-Arp did not work
Updated 4 years ago1
'nmap program was not found in path'
Updated 4 years ago1
Errno 2] No such file or directory: b'liblibc.a'
Updated 4 years ago3
Kickthemout won't start, Python Error
Updated 4 years ago2
Not detecting Gateway and not scanning
Updated 4 years ago1
Issue
Updated 4 years ago5
Kickthemout command
Updated 4 years ago
[Errno 2] No such file or directory: b'liblibc.a'
Updated 4 years ago1
KickThemOut Error
Updated 4 years ago