Knapsack splits tests across CI nodes and makes sure that tests will run comparable time on each node.
Parallel tests across CI server nodes based on each test file's time execution. Knapsack generates a test time execution report and uses it for future test runs.
The knapsack gem supports:
Feature | knapsack gem | knapsack_pro gem |
---|---|---|
Test suite split based on tests time execution | ✔ | ✔ |
Automated tests time execution recording | ✘ | ✔ |
Test suite split based on most up to date tests time execution data | ✘ | ✔ |
Show all features |
Would you like to try knapsack_pro gem with more features and free access for early users? Please visit Knapsack Pro.
Table of Contents generated with DocToc
- Update gem
- Installation
- Usage
- Setup your CI server
- FAQ
- Gem tests
- Contributing
- Acknowledgements
- Mentions
Please check changelog before update gem. Knapsack follows semantic versioning.
Add those lines to your application's Gemfile:
group :test, :development do
gem 'knapsack'
end
And then execute:
$ bundle
Add this line at the bottom of Rakefile
:
Knapsack.load_tasks if defined?(Knapsack)
You can find here example of rails app with already configured knapsack.
https://github.com/KnapsackPro/rails-app-with-knapsack
Add at the beginning of your spec_helper.rb
:
require 'knapsack'
# CUSTOM_CONFIG_GOES_HERE
Knapsack::Adapters::RSpecAdapter.bind
Create file features/support/knapsack.rb
and add there:
require 'knapsack'
# CUSTOM_CONFIG_GOES_HERE
Knapsack::Adapters::CucumberAdapter.bind
Add at the beginning of your test_helper.rb
:
require 'knapsack'
# CUSTOM_CONFIG_GOES_HERE
knapsack_adapter = Knapsack::Adapters::MinitestAdapter.bind
knapsack_adapter.set_test_helper_path(__FILE__)
Create file features/support/env.rb
and add there:
require 'knapsack'
# CUSTOM_CONFIG_GOES_HERE
Knapsack::Adapters::SpinachAdapter.bind
You can change default Knapsack configuration for RSpec, Cucumber, Minitest or Spinach tests. Here are examples what you can do. Put below configuration instead of CUSTOM_CONFIG_GOES_HERE
.
Knapsack.tracker.config({
enable_time_offset_warning: true,
time_offset_in_seconds: 30
})
Knapsack.report.config({
test_file_pattern: 'spec/**{,/*/**}/*_spec.rb', # default value based on adapter
report_path: 'knapsack_custom_report.json'
})
# you can use your own logger
require 'logger'
Knapsack.logger = Logger.new(STDOUT)
Knapsack.logger.level = Logger::INFO
Generate time execution report for your test files. Run below command on one of your CI nodes.
# Step for RSpec
$ KNAPSACK_GENERATE_REPORT=true bundle exec rspec spec
# Step for Cucumber
$ KNAPSACK_GENERATE_REPORT=true bundle exec cucumber features
# Step for Minitest
$ KNAPSACK_GENERATE_REPORT=true bundle exec rake test
# If you use rails 5 then run this instead:
$ KNAPSACK_GENERATE_REPORT=true bundle exec rake knapsack:minitest
# Step for Spinach
$ KNAPSACK_GENERATE_REPORT=true bundle exec spinach
Commit generated report knapsack_rspec_report.json
, knapsack_cucumber_report.json
, knapsack_minitest_report.json
or knapsack_spinach_report.json
into your repository.
This report should be updated only after you add a lot of new slow tests or you change existing ones which causes a big time execution difference between CI nodes. Either way, you will get time offset warning at the end of the rspec/cucumber/minitest results which reminds you when it’s a good time to regenerate the knapsack report.
KNAPSACK_GENERATE_REPORT
is truthy when "true"
or 0
. All other values are falsy, though
"false"
, and 1
are semantically
preferrable.
There is no need to regenerate the report every time when you add/remove test file. If you remove a test file then Knapsack will ignore its entry in report. In case when you add a new file and it doesn't already exist in report, the test file will be assigned to one of the CI node.
You'll want to regenerate your execution report whenever you remove or add a test file with a long time execution time that would affect one of the CI nodes. You will get Knapsack notification whenever is good time to regenerate report.
On your CI server run this command for the first CI node. Update CI_NODE_INDEX
for the next one.
# Step for RSpec
$ CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:rspec
# Step for Cucumber
$ CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:cucumber
# Step for Minitest
$ CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:minitest
# Step for Spinach
$ CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:spinach
You can add KNAPSACK_TEST_FILE_PATTERN
if your tests are not in default directory. For instance:
# Step for RSpec
$ KNAPSACK_TEST_FILE_PATTERN="directory_with_specs/**{,/*/**}/*_spec.rb" CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:rspec
# Step for Cucumber
$ KNAPSACK_TEST_FILE_PATTERN="directory_with_features/**/*.feature" CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:cucumber
# Step for Minitest
$ KNAPSACK_TEST_FILE_PATTERN="directory_with_tests/**{,/*/**}/*_spec.rb" CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:minitest
# Step for Spinach
$ KNAPSACK_TEST_FILE_PATTERN="directory_with_features/**/*.feature" CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:spinach
You can set KNAPSACK_REPORT_PATH
if your knapsack report was saved in non default location. Example:
# Step for RSpec
$ KNAPSACK_REPORT_PATH="knapsack_custom_report.json" CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:rspec
# Step for Cucumber
$ KNAPSACK_REPORT_PATH="knapsack_custom_report.json" CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:cucumber
# Step for Minitest
$ KNAPSACK_REPORT_PATH="knapsack_custom_report.json" CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:minitest
# Step for Spinach
$ KNAPSACK_REPORT_PATH="knapsack_custom_report.json" CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:spinach
CI_NODE_TOTAL
- total number CI nodes you have.
CI_NODE_INDEX
- index of current CI node starts from 0. Second CI node should have CI_NODE_INDEX=1
.
Knapsack allows you to pass arguments through to rspec. For example if you want to run only specs that have the tag focus
. If you do this with rspec directly it would look like:
$ bundle exec rake rspec --tag focus
To do this with Knapsack you simply add your rspec arguments as parameters to the knapsack rake task.
$ bundle exec rake "knapsack:rspec[--tag focus]"
Remember that using tags to limit which specs get run will affect the time each file takes to run. One solution to this is to generate a new knapsack_rspec_report.json
for the commonly run scenarios.
Add arguments to knapsack cucumber task like this:
$ bundle exec rake "knapsack:cucumber[--name feature]"
Add arguments to knapsack minitest task like this:
$ bundle exec rake "knapsack:minitest[--arg_name value]"
For instance to run verbose tests:
$ bundle exec rake "knapsack:minitest[--verbose]"
Add arguments to knapsack spinach task like this:
$ bundle exec rake "knapsack:spinach[--name feature]"
You can install knapsack globally and use binary. For instance:
$ knapsack rspec "--tag custom_tag_name --profile"
$ knapsack cucumber
$ knapsack minitest "--verbose --pride"
$ knapsack spinach "-f spinach_examples"
Here you will find example when it might be useful.
If you are using circleci.com you can omit CI_NODE_TOTAL
and CI_NODE_INDEX
. Knapsack will use CIRCLE_NODE_TOTAL
and CIRCLE_NODE_INDEX
provided by CircleCI.
Here is an example for test configuration in your circleci.yml
file.
For the first time run all tests on a single CI node with enabled report generator.
test:
override:
# Step for RSpec
- KNAPSACK_GENERATE_REPORT=true bundle exec rspec spec
# Step for Cucumber
- KNAPSACK_GENERATE_REPORT=true bundle exec cucumber features
# Step for Minitest
- KNAPSACK_GENERATE_REPORT=true bundle exec rake test
# Step for Spinach
- KNAPSACK_GENERATE_REPORT=true bundle exec spinach
After tests pass on your CircleCI machine your should copy knapsack json report which is rendered at the end of rspec/cucumber/minitest results. Save it into your repository as knapsack_rspec_report.json
, knapsack_cucumber_report.json
, knapsack_minitest_report.json
or knapsack_spinach_report.json
file and commit.
Now you should update test command and enable parallel. Please remember to add additional containers for your project in CircleCI settings.
test:
override:
# Step for RSpec
- bundle exec rake knapsack:rspec:
parallel: true # Caution: there are 8 spaces indentation!
# Step for Cucumber
- bundle exec rake knapsack:cucumber:
parallel: true # Caution: there are 8 spaces indentation!
# Step for Minitest
- bundle exec rake knapsack:minitest:
parallel: true # Caution: there are 8 spaces indentation!
# Step for Spinach
- bundle exec rake knapsack:spinach:
parallel: true # Caution: there are 8 spaces indentation!
Now everything should works. You will get warning at the end of rspec/cucumber/minitest results if time execution will take too much.
For the first time run all tests at once with enabled report generator. Edit .travis.yml
script:
# Step for RSpec
- "KNAPSACK_GENERATE_REPORT=true bundle exec rspec spec"
# Step for Cucumber
- "KNAPSACK_GENERATE_REPORT=true bundle exec cucumber features"
# Step for Minitest
- "KNAPSACK_GENERATE_REPORT=true bundle exec rake test"
# Step for Spinach
- "KNAPSACK_GENERATE_REPORT=true bundle exec spinach"
After tests pass your should copy knapsack json report which is rendered at the end of rspec/cucumber/minitest results. Save it into your repository as knapsack_rspec_report.json
, knapsack_cucumber_report.json
, knapsack_minitest_report.json
or knapsack_spinach_report.json
file and commit.
You can parallel your builds across virtual machines with travis matrix feature. Edit .travis.yml
script:
# Step for RSpec
- "bundle exec rake knapsack:rspec"
# Step for Cucumber
- "bundle exec rake knapsack:cucumber"
# Step for Minitest
- "bundle exec rake knapsack:minitest"
# Step for Spinach
- "bundle exec rake knapsack:spinach"
env:
- CI_NODE_TOTAL=2 CI_NODE_INDEX=0
- CI_NODE_TOTAL=2 CI_NODE_INDEX=1
If you want to have some global ENVs and matrix of ENVs then do it like this:
script:
# Step for RSpec
- "bundle exec rake knapsack:rspec"
# Step for Cucumber
- "bundle exec rake knapsack:cucumber"
# Step for Minitest
- "bundle exec rake knapsack:minitest"
# Step for Spinach
- "bundle exec rake knapsack:spinach"
env:
global:
- RAILS_ENV=test
- MY_GLOBAL_VAR=123
- CI_NODE_TOTAL=2
matrix:
- CI_NODE_INDEX=0
- CI_NODE_INDEX=1
Such configuration will generate matrix with 2 following ENV rows:
CI_NODE_TOTAL=2 CI_NODE_INDEX=0 RAILS_ENV=test MY_GLOBAL_VAR=123
CI_NODE_TOTAL=2 CI_NODE_INDEX=1 RAILS_ENV=test MY_GLOBAL_VAR=123
More info about global and matrix ENV configuration in travis docs.
For the first time run all tests at once with enabled report generator. Set up your build command:
# Step for RSpec
KNAPSACK_GENERATE_REPORT=true bundle exec rspec spec
# Step for Cucumber
KNAPSACK_GENERATE_REPORT=true bundle exec cucumber features
# Step for Minitest
KNAPSACK_GENERATE_REPORT=true bundle exec rake test
# Step for Spinach
KNAPSACK_GENERATE_REPORT=true bundle exec spinach
After tests pass your should copy knapsack json report which is rendered at the end of rspec/cucumber/test results. Save it into your repository as knapsack_rspec_report.json
, knapsack_cucumber_report.json
, knapsack_minitest_report.json
or knapsack_spinach_report.json
file and commit.
Knapsack supports semaphoreapp ENVs SEMAPHORE_THREAD_COUNT
and SEMAPHORE_CURRENT_THREAD
. The only thing you need to do is set up knapsack rspec/cucumber/minitest command for as many threads as you need. Here is an example:
# Thread 1
## Step for RSpec
bundle exec rake knapsack:rspec
## Step for Cucumber
bundle exec rake knapsack:cucumber
## Step for Minitest
bundle exec rake knapsack:minitest
## Step for Spinach
bundle exec rake knapsack:spinach
# Thread 2
## Step for RSpec
bundle exec rake knapsack:rspec
## Step for Cucumber
bundle exec rake knapsack:cucumber
## Step for Minitest
bundle exec rake knapsack:minitest
## Step for Spinach
bundle exec rake knapsack:spinach
Tests will be split across threads.
For the first time run all tests at once with enabled report generator. Run the following commands locally:
# Step for RSpec
KNAPSACK_GENERATE_REPORT=true bundle exec rspec spec
# Step for Cucumber
KNAPSACK_GENERATE_REPORT=true bundle exec cucumber features
# Step for Minitest
KNAPSACK_GENERATE_REPORT=true bundle exec rake test
# Step for Spinach
KNAPSACK_GENERATE_REPORT=true bundle exec spinach
After tests pass your should copy knapsack json report which is rendered at the end of rspec/cucumber/minitest results. Save it into your repository as knapsack_rspec_report.json
, knapsack_cucumber_report.json
, knapsack_minitest_report.json
or knapsack_spinach_report.json
file and commit.
Knapsack supports buildkite ENVs BUILDKITE_PARALLEL_JOB_COUNT
and BUILDKITE_PARALLEL_JOB
. The only thing you need to do is to configure the parallelism parameter in your build step and run the appropiate command in your build
# Step for RSpec
bundle exec rake knapsack:rspec
# Step for Cucumber
bundle exec rake knapsack:cucumber
# Step for Minitest
bundle exec rake knapsack:minitest
# Step for Spinach
bundle exec rake knapsack:spinach
For the first time run all tests at once with enabled report generator. Run the following commands locally:
# Step for RSpec
KNAPSACK_GENERATE_REPORT=true bundle exec rspec spec
# Step for Cucumber
KNAPSACK_GENERATE_REPORT=true bundle exec cucumber features
# Step for Minitest
KNAPSACK_GENERATE_REPORT=true bundle exec rake test
# Step for Spinach
KNAPSACK_GENERATE_REPORT=true bundle exec spinach
After tests pass your should copy knapsack json report which is rendered at the end of rspec/cucumber/minitest results. Save it into your repository as knapsack_rspec_report.json
, knapsack_cucumber_report.json
, knapsack_minitest_report.json
or knapsack_spinach_report.json
file and commit.
Knapsack supports snap-ci.com ENVs SNAP_WORKER_TOTAL
and SNAP_WORKER_INDEX
. The only thing you need to do is to configure number of workers for your project in configuration settings in order to enable parallelism. Next thing is to set below commands to be executed in your stage:
# Step for RSpec
bundle exec rake knapsack:rspec
# Step for Cucumber
bundle exec rake knapsack:cucumber
# Step for Minitest
bundle exec rake knapsack:minitest
# Step for Spinach
bundle exec rake knapsack:spinach
At the end of tests execution results you can see warning like this:
========= Knapsack Time Offset Warning ==========
Time offset: 30s
Max allowed node time execution: 02m 30s
Exceeded time: 37s
Time offset: 30s
- this is the current time offset value, by default it’s 30s. Let’s assume whole test suite takes 4 minutes and you do split across 2 CI nodes so the optimal split is 2 minutes per node. Time offset 30s means when tests on single CI node will take longer than 2 minutes and 30s then you see warning about regenerating report because probably test suite files changed and the knapsack report contains old time execution data about each test file so regenerating knapsack report should help you provide a more optimal test suite split.
Max allowed node time execution: 02m 30s
- it’s average time execution of tests per CI node + time offset. In this case average tests time execution per CI node is 2 minutes.
Exceeded time: 37s
- it means tests on particular CI node took 37s longer than max allowed node time execution
. Sometimes this value is negative when tests executed faster than max allowed node time execution
.
If you want to regenerate report take a look here.
KNAPSACK_GENERATE_REPORT=true bundle exec rspec spec
If you run command like this on your development machine then test suite time execution might be different than if you generate a report on CI machine (for instance tests might be faster on your machine then on CI node) so that might be a reason why you see warning about regenerating report. You can generate the report on single CI node which should give you result specific for your CI node instead of your development machine. In case you don't want to bother about manually regenerating knapsack report please take a look on knapsack_pro gem.
When you run your specs with knapsack rake task then you will see in the output something like:
Report specs:
spec/models/user_spec.rb
spec/controllers/users_controller_spec.rb
Leftover specs:
spec/models/book_spec.rb
spec/models/author_spec.rb
The leftover specs mean we don't have recorded time execution for those test files so the leftover specs were distributed across CI nodes based on file name instead. The reason might be that someone added a new test file after knapsack report was generated. Another reason might be an empty spec file. If you have a lot of leftover specs then you can generate knapsack report again to improve you test distribution across CI nodes.
The test file pattern config option supports any glob pattern handled by Dir.glob
and can be configured to pull test files from multiple directories. An example of this when using RSpec would be "{spec,engines/**/spec}/**{,/*/**}/*_spec.rb"
. For complex cases like this, the test directory can't be extracted and must be specified manually using the KNAPSACK_TEST_DIR
environment variable:
$ KNAPSACK_TEST_DIR=spec KNAPSACK_TEST_FILE_PATTERN="{spec,engines/**/spec}/**{,/*/**}/*_spec.rb" bundle exec rake knapsack:rspec
KNAPSACK_TEST_DIR
will be your default path for rspec so you should put there your spec_helper.rb
. Please ensure you will require it in your test files this way:
# good
require_relative 'spec_helper'
# bad - won't work
require 'spec_helper'
You may want to look at monkey patch in this issue. Take into account that there are some cons of this approach.
In your development environment you can debug tests that were run on the particular CI node. For instance to run subset of tests for the first CI node with specified seed you can do.
CI_NODE_TOTAL=2 \
CI_NODE_INDEX=0 \
bundle exec rake "knapsack:rspec[--seed 123]"
Above example is for RSpec. You can use respectively rake task name and token environment variable when you want to run tests for minitest, cucumber or spinach.
To run specs for Knapsack gem type:
$ bundle exec rspec spec
Directory spec_examples
contains examples of fast and slow specs. There is a spec_example/spec_helper.rb
with binded Knapsack.
To generate a new knapsack report for specs with focus
tag (only specs in spec_examples/leftover
directory have no focus
tag), please type:
$ KNAPSACK_GENERATE_REPORT=true bundle exec rspec --default-path spec_examples --tag focus
Warning: Current knapsack_rspec_report.json
file was generated for spec_examples
except spec_examples/leftover
directory. Just for testing reason to see how leftover specs will be distribute in a dumb way across CI nodes.
To see specs distributed for the first CI node type:
$ CI_NODE_TOTAL=2 CI_NODE_INDEX=0 KNAPSACK_SPEC_PATTERN="spec_examples/**{,/*/**}/*_spec.rb" bundle exec rake knapsack:rspec
Specs in spec_examples/leftover
take more than 3 seconds. This should cause a Knapsack time offset warning because we set time_offset_in_seconds
to 3 in spec_examples/spec_helper.rb
. Type below to see warning:
$ bundle exec rspec --default-path spec_examples
- Fork it ( https://github.com/ArturT/knapsack/fork )
- Create your feature branch (
git checkout -b my-new-feature
) - Commit your changes (
git commit -am 'Add some feature'
) - Push to the branch (
git push origin my-new-feature
) - You can create example tests in related repository with example of rails application and knapsack gem usage.
- Create a new Pull Request
Many thanks to Małgorzata Nowak for beautiful logo.
- Lunar Logic Blog | Parallel your specs and don’t waste time
- Travis CI | Parallelizing RSpec and Cucumber on multiple VMs
- Semaphore | Running RSpec specs in parallel
- Semaphore | Running Cucumber scenarios in parallel
- Buildkite | Libraries
- Snap CI | Knapsack: optimal test suite split based on time execution