jvmncs / Adv360-Pro-ZMK

Production repository for the all-new Advantage360 Professional using ZMK engine

ADV360-PRO-ZMK

To build Firmware in GitHub Actions

Setup

1. Fork this repo.
2. Enable GitHub Actions on your fork.

Build firmware

1. Push a commit to trigger the build.
2. Download the artifact.

To build Firmware locally using a container

First run

Note: Either Podman or Docker is required, Podman is preferred if both are present.

1. Execute make all.
2. Check the firmware directory for the latest firmware build.

Subsequent runs

If the only file you have changed is config/adv360.keymap, execute make build and check the firmware directory for the latest firmware build.

If you have changed other files in the config directory (such as config/west.yml) you will need to execute make all to rebuild the Docker image as well as the firmware.

Flash firmware

Resources can be found on Kinesis.com https://kinesis-ergo.com/support/kb360pro/#firmware-updates https://kinesis-ergo.com/support/kb360pro/#manuals