HomeAssistant - Salus Controls iT600 Smart Home Custom Component
What This Is
This is a custom component to allows you to control and monitor your Salus iT600 smart home devices locally through Salus Controls UGE600 / UGE600 universal gateway.
Supported devices
See the readme of underlying pyit600 library
Installation and Configuration
HACS (recommended)
This card is available in HACS (Home Assistant Community Store). HACS is a third party community store and is not included in Home Assistant out of the box.
Manual install
Copy custom_components folder from this repository to /config of your Home Assistant instalation.
To configure this integration, go to Home Assistant web interface Configuration -> Integrations and then press "+" button and select "Salus iT600".
When you are done with configuration you should see your devices in Configuration -> Integrations -> Entities
Troubleshooting
If you can't connect using EUID written down on the bottom of your gateway (which looks something like 001E5E0D32906128), try using 0000000000000000 as EUID.
Also check if you have "Local Wifi Mode" enabled:
- Open Smart Home app on your phone
- Sign in
- Double tap your Gateway to open info screen
- Press gear icon to enter configuration
- Scroll down a bit and check if "Disable Local WiFi Mode" is set to "No"
- Scroll all the way down and save settings
- Restart Gateway by unplugging/plugging USB power