Conversations: the very last word in instant messaging
- Be as beautiful and easy to use as possible without sacrificing security or privacy
- Rely on existing, well established protocols (XMPP)
- Do not require a Google Account or specifically Google Cloud Messaging (GCM)
- Require as few permissions as possible
- End-to-end encryption with OMEMO, OTR, or OpenPGP
- Send and receive images as well as other kind of files
- Share your location via an external plug-in
- Indication when your contact has read your message
- Intuitive UI that follows Android Design guidelines
- Pictures / Avatars for your Contacts
- Syncs with desktop client
- Conferences (with support for bookmarks)
- Address book integration
- Multiple accounts / unified inbox
- Very low impact on battery life
Conversations works with every XMPP server out there. However XMPP is an extensible protocol. These extensions are standardized as well in so called XEP's. Conversations supports a couple of these to make the overall user experience better. There is a chance that your current XMPP server does not support these extensions; therefore to get the most out of Conversations you should consider either switching to an XMPP server that does or — even better — run your own XMPP server for you and your friends. These XEP's are:
- XEP-0065: SOCKS5 Bytestreams (or mod_proxy65). Will be used to transfer files if both parties are behind a firewall (NAT).
- XEP-0163: Personal Eventing Protocol for avatars and OMEMO.
- XEP-0191: Blocking command lets you blacklist spammers or block contacts without removing them from your roster.
- XEP-0198: Stream Management allows XMPP to survive small network outages and changes of the underlying TCP connection.
- XEP-0280: Message Carbons which automatically syncs the messages you send to your desktop client and thus allows you to switch seamlessly from your mobile client to your desktop client and back within one conversation.
- XEP-0237: Roster Versioning mainly to save bandwidth on poor mobile connections
- XEP-0313: Message Archive Management synchronize message history with the server. Catch up with messages that were sent while Conversations was offline.
- XEP-0352: Client State Indication lets the server know whether or not Conversations is in the background. Allows the server to save bandwidth by withholding unimportant packages.
- XEP-0363: HTTP File Upload allows you to share files in conferences and with offline contacts.
(In order of appearance)
- Rene Treffer (PRs)
- Andreas Straub (PRs)
- Alethea Butler (PRs)
- M. Dietrich (PRs)
- betheg (PRs)
- Sam Whited (PRs)
- BrianBlade (PRs)
- Ilia Rostovtsev (Progress)
- Diego Turtulici (Original)
- fiaxh (OMEMO)
Translations are managed on Transifex
Conversations is entirely open source and licensed under GPLv3. So if you are a software developer you can check out the sources from GitHub and use Gradle to build your apk file.
The more convenient way — which not only gives you automatic updates but also supports the further development of Conversations — is to buy the App in the Google Play Store.
Buying the App from the Play Store will also give you access to our beta test.
I accept donations over PayPal, Bitcoin and Flattr. For donations via PayPal you
can use the email address donate@siacs.eu
or the button below.
Disclaimer: I'm not a huge fan of PayPal and their business policies. For larger contributions please get in touch with me beforehand and we can talk about bank transfer (SEPA).
My Bitcoin Address is: 1NxSU1YxYzJVDpX1rcESAA3NJki7kRgeeu
XMPP, like email, is a federated protocol, which means that there is not one company you can create an official XMPP account with. Instead there are hundreds, or even thousands, of providers out there. One of those providers is our very own conversations.im. If you don’t like to use conversations.im use a web search engine of your choice to find another provider. Or maybe your university has one. Or you can run your own. Or ask a friend to run one. Once you've found one, you can use Conversations to create an account. Just select register new account on server within the create account dialog.
If you have a server somewhere and are willing to put some work in, the best alternative-in the spirit of federation-is to run your own. We recommand either Prosody or ejabberd. Both of which have their own strengths. Ejabberd is slightly more mature nowadays but Prosody is arguably easier to set up.
For Prosody you need a couple of so called community modules most of which are maintained by the same people that develop Prosody.
If you pick ejabberd make sure you use the latest version. Linux Distributions might bundle some very old versions of it.
Conversations will automatically look up the SRV records for your domain name which can point to any hostname port combination. If your server doesn’t provide those please contact your admin and have them read this. If your server operator is unwilling to fix this you can enable advanced server settings in the expert settings of Conversations.
As regular user you should be picking a different server. The server you selected is probably insecure and/or very old.
If you are a server administrator you should make sure that your server provides STARTTLS. XMPP over TLS (on a different port) is not sufficient.
On rare occasions this error message might also be caused by a server not providing a login (SASL) mechanism that Conversations is able to handle. Conversations supports SCRAM-SHA1, PLAIN, EXTERNAL (client certs) and DIGEST-MD5.
You need to be running the Play Store version of Conversations and your server needs to support push notifications.¹ Because Google Cloud Notifications (GCM) are tied with an API key to a specific app your server can not initiate the push message directly. Instead your server will send the push notification to the Conversations App server (operated by us) which then acts as a proxy and initiates the push message for you. The push message sent from our App server through GCM doesn’t contain any personal information. It is just an empty message which will wake up your device and tell Conversations to reconnect to your server. The information send from your server to our App server depends on the configuration of your server but can be limited to your account name. (In any case the Conversations App server won't redirect any information through GCM even if your server sends this information.)
In summary Google will never get hold of any personal information besides that something happened. (Which doesn’t even have to be a message but can be some automated event as well.) We - as the operator of the App server - will just get hold of your account name (without being able to tie this to your specific device).
If you don’t want this simply pick a server which does not offer Push Notifications or build Conversations yourself without support for push notifications. (This is available via a gradle build flavor.) Non-play store source of Conversations like the Amazon App store will also offer a version without push notifications. Conversations will just work as before and maintain its own TCP connection in the background.
¹ Your server only needs to support the server side of XEP-0357: Push Notifications. If you use the Play Store version you do not need to run your own app server. The server modules are called mod_cloud_notify on Prosody and mod_push on ejabberd.
You can join our conference room on conversations@conference.siacs.eu
.
A lot of people in there are able to answer basic questions about the usage of
Conversations or can provide you with tips on running your own XMPP server. If
you found a bug or your app crashes please read the Developer / Report Bugs
section of this document.
I'm available for hire. Contact me at inputmice@siacs.eu
.
The address book integration was designed to protect your privacy. Conversations neither uploads contacts from your address book to your server nor fills your address book with unnecessary contacts from your online roster. If you manually add a Jabber ID to your phones address book Conversations will use the name and the profile picture of this contact. To make the process of adding Jabber IDs to your address book easier you can click on the profile picture in the contact details within Conversations. This will start an "add to address book" intent with the JID as the payload. This doesn't require Conversations to have write permissions on your address book but also doesn't require you to copy/paste a JID from one app to another.
If you get delivery failed on images it's probably because the recipient lost network connectivity during reception. In that case you can try it again at a later time.
For text messages the answer to your question is a little bit more complex. When you see 'delivery failed' on text messages, it is always something that is being reported by the server. The most common reason for this is that the recipient failed to resume a connection. When a client loses connectivity for a short time the client usually has a five minute window to pick up that connection again. When the client fails to do so because the network connectivity is out for longer than that all messages sent to that client will be returned to the sender resulting in a delivery failed.
Instead of returning a message to the sender both ejabberd and prosody have the
ability to store messages in offline storage when the disconnecting client is
the only client. In prosody this is available via an extra module called
mod_smacks_offline
. In ejabberd this is available via some configuration
settings.
Other less common reasons are that the message you sent didn't meet some criteria enforced by the server (too large, too many). Another reason could be that the recipient is offline and the server doesn't provide offline storage.
Usually you are able to distinguish between these two groups in the fact that the first one happens always after some time and the second one happens almost instantly.
Statuses are a horrible metric. Setting them manually to a proper value rarely works because users are either lazy or just forget about them. Setting them automatically does not provide quality results either. Keyboard or mouse activity as indicator for example fails when the user is just looking at something (reading an article, watching a movie). Furthermore automatic setting of status always implies an impact on your privacy (are you sure you want everybody in your contact list to know that you have been using your computer at 4am‽).
In the past status has been used to judge the likelihood of whether or not your messages are being read. This is no longer necessary. With Chat Markers (XEP-0333, supported by Conversations since 0.4) we have the ability to know whether or not your messages are being read. Similar things can be said for priorities. In the past priorities have been used (by servers, not by clients!) to route your messages to one specific client. With carbon messages (XEP-0280, supported by Conversations since 0.1) this is no longer necessary. Using priorities to route OTR messages isn't practical either because they are not changeable on the fly. Metrics like last active client (the client which sent the last message) are much better.
Unfortunately these modern replacements for legacy XMPP features are not widely adopted. However Conversations should be an instant messenger for the future and instead of making Conversations compatible with the past we should work on implementing new, improved technologies and getting them into other XMPP clients as well.
Making these status and priority optional isn't a solution either because Conversations is trying to get rid of old behaviours and set an example for other clients.
On the one hand Conversations supports Message Archive Management to keep a server side history of your messages so when migrating to a new device that device can display your entire history. However that does not work if you enable OMEMO due to its forward secrecy. (Read The State of Mobile XMPP in 2016 especially the section on encryption.)
If you migrate to a new device and would still like to keep your history please use a third party backup tool like oandbackup or adb backup
from your computer. It is important that your deactivate your account before backup and activate it only after a succesful restore. Otherwise OMEMO might not work afterwards.
I'm open for new feature suggestions. You can use the issue tracker on GitHub. Please take some time to browse through the issues to see if someone else already suggested it. Be assured that I read each and every ticket. If I like it I will leave it open until it's implemented. If I don't like it I will close it (usually with a short comment). If I don't comment on an feature request that's probably a good sign because this means I agree with you. Commenting with +1 on either open or closed issues won't change my mind, nor will it accelerate the development.
Just write it yourself and send me a pull request. If I like it I will happily merge it if I don't at least you and like minded people get to enjoy it.
I am available for hire. Contact me via XMPP: inputmice@siacs.eu
- OTR is a legacy encryption method. It works out of the box with most contacts as long as they are online.
- OMEMO works even when a contact is offline, and works with multiple devices. It also allows asynchronous file-transfer when the server has HTTP File Upload. However, OMEMO is not as widely supported as OTR and is currently implemented only by Conversations and Gajim. OMEMO should be preferred over OTR for contacts who use Conversations.
- OpenPGP (XEP-0027) is a very old encryption method that has some advantages over OTR but should only be used by experts who know what they are doing.
Before you continue reading you should note that the OpenPGP support in Conversations is experimental. This is not because it will make the app unstable but because the fundamental concepts of PGP aren't ready for widespread use. The way PGP works is that you trust Key IDs instead of JID's or email addresses. So in theory your contact list should consist of Public-Key-IDs instead of JID's. But of course no email or XMPP client out there implements these concepts. Plus PGP in the context of instant messaging has a couple of downsides: It is vulnerable to replay attacks, it is rather verbose, and decrypting and encrypting takes longer than OTR. It is however asynchronous and works well with message carbons.
To use OpenPGP you have to install the open source app OpenKeychain and then long press on the account in manage accounts and choose renew PGP announcement from the contextual menu.
OMEMO has two requirments: Your server and the server of your contact need to support PEP. Both of you can verify that indivually by opening your account details and selecting Server info
from the menu. The appearing table should list PEP as available. The second requirement is mutal presence subscription. You can verify that be going into the contact details and see if the both check boxes Send presence updates and Receive presence updates are checked.
For conferences only OMEMO and OpenPGP are supported as encryption method. (OTR does not work with multiple participants).
OMEMO encryption works only in private (members only) conferences that are non-anonymous. You need to have presence subscription with every member of the conference. You can verify that by going into the conference details, long press every member and start a conversation with them. (Or select 'contact details' if they are already in your contact list)
The owner of a conference can make a public conference private by going into the conference details and hit the settings button (the one with the gears) and select both private and members only.
If OMEMO is grayed out long pressing the lock icon will reveal some quick hints on why OMEMO is disabled.
Every participant has to announce their OpenPGP key (see answer above). If you would like to send encrypted messages to a conference you have to make sure that you have every participant's public key in your OpenKeychain. Right now there is no check in Conversations to ensurethat. You have to take care of that yourself. Go to the conference details and touch every key id (The hexadecimal number below a contact). This will send you to OpenKeychain which will assist you on adding the key. This works best in very small conferences with contacts you are already using OpenPGP with. This feature is regarded experimental. Conversations is the only client that uses XEP-0027 with conferences. (The XEP neither specifically allows nor disallows this.)
If you bought the App on Google Play you can get access to the latest beta version by joining the Conversations Beta Testers community on Google+ and then using this link to sign up for the beta test.
Make sure to have ANDROID_HOME point to your Android SDK. Use the Android SDK Manager to install missing dependencies.
git clone https://github.com/siacs/Conversations.git
cd Conversations
./gradlew assembleFreeDebug
There are two build flavors available. free and playstore. Unless you know what you are doing you only need free.
If the library you want to update is in Maven Central or JCenter (or has its own
Maven repo), add it or update its version in build.gradle
. If the library is
in the libs/
directory, you can update it using a subtree merge by doing the
following (using minidns
as an example):
git remote add minidns https://github.com/rtreffer/minidns.git
git fetch minidns
git merge -s subtree minidns master
To add a new dependency to the libs/
directory (replacing "name", "branch" and
"url" as necessary):
git remote add name url
git merge -s ours --no-commit name/branch
git read-tree --prefix=libs/name -u name/branch
git commit -m "Subtree merged in name"
If something goes wrong Conversations usually exposes very little information in the UI (other than the fact that something didn't work). However with adb (android debug bridge) you squeeze some more information out of Conversations. These information are especially useful if you are experiencing trouble with your connection or with file transfer.
adb -d logcat -v time -s conversations
Please report it to our issue tracker. If your app crashes please provide a stack trace. If you are experiencing misbehavior please provide detailed steps to reproduce. Always mention whether you are running the latest Play Store version or the current HEAD. If you are having problems connecting to your XMPP server your file transfer doesn’t work as expected please always include a logcat debug output with your issue (see above).