jupyterlab_code_formatter

Code formatter for JupyterLab.

Prerequisites

JupyterLab installed under Python3.6+ environment

Why Python3.6+

Mainly because Black requires 3.6+, and I like using Black the most;
Typing support requires 3.5+, and I like typing;

Installation

Using pip

jupyter labextension install @ryantam626/jupyterlab_code_formatter
pip install jupyterlab_code_formatter
jupyter serverextension enable --py jupyterlab_code_formatter
# Remember to install one of the supported formatters (it's in the next section)

Using conda

conda install -c conda-forge black
jupyter labextension install @ryantam626/jupyterlab_code_formatter
conda install -c conda-forge jupyterlab_code_formatter
jupyter serverextension enable --py jupyterlab_code_formatter

Make sure to restart jupyter server after installation.

Installation of formatters

For jupyterlab_code_formatter to work, you would also need some formatters, three are currently supported:

Python

Black;
YAPF;
Autopep8;
Isort;

Install at least one of them through pip install black for example (or its equivalent in other package management systems).

R

formatR
- using pip: pip install rpy2 and use R command to install formatR package
- using conda: conda install rpy2 r-formatr
styler
- using pip: pip install rpy2 and use R command to install styler package
- using conda: conda install rpy2 r-styler

Usage

Assuming you do have one of the formatters installed in the Python environment that runs JupyterLab, some extra options would appear under JUPYTERLAB CODE FORMATTER, use those to apply formatting to current codecell.

For mass application of formatter, you will need to use Format Cell found in the context menu (right click on notebook), or Format Notebook on the command tools bar, you might need to configure your default formatters for this to work like you intended (see the "Configs" section below).

Configs

There are some formatter config exposed through the Jupyter Lab Advanced Settings Editor, have a browse and change it if you wish. for example:

{
    "autopep8": {
        "max_line_length": 120,
        "ignore": [
            "E226",
            "E302",
            "E41"
        ]
    }
}

In order to use the jupyterlab_code_formatter:format and jupyterlab_code_formatter:format_all commands with your favourite formatters, you might need to configure your default formatters, for example:

{
    "preferences": {
        "default_formatter": {
            "python": "autopep8",
            "R": "styler"
        }
    }
}

How about a keyboard shortcut?

Assuming you are using jupyterlab>=1.0.0, you can add an extra entry to your keyboard shortcuts settings with something like

{
    "shortcuts": [
        {
            "command": "jupyterlab_code_formatter:black",
            "keys": [
                "Ctrl K",
                "Ctrl M"
            ],
            "selector": ".jp-Notebook.jp-mod-editMode"
        }
    ]
}

This basically says "Under edit mode (detected through the selector), using the chord Ctrl K + Ctrl M, invoke the jupyterlab_code_formatter:black command". And there you have it 🎉

For Autopep8, YAPF or Isort, simply do autopep8/yapf/isort instead of black.

For the mass application of formatters, the commands would be jupyterlab_code_formatter:format and jupyterlab_code_formatter:format_all, again please check out the "Configs" section to see how to choose the correct formatter.

Using the Black formatter on Windows

You might see some errors about writing grammar tables when using the black formatter on Windows, simply manually create the directory as suggested in here and you should be good to go.

Why are the commands not showing up in the command pallete?

Make sure you really have one of the formatters properly installed.

And also make sure you have a suitable notebook/script opened for the formatters to work on when checking if the commands are there.

Development

For a development install (requires npm version 4 or later), do the following in the repository directory:

npm install
npm run build
jupyter labextension link .
pip install -e .

To rebuild the package and the JupyterLab app:

npm run build
jupyter lab build

jtpio / jupyterlab_code_formatter