jtmoderate876 / BetterPhotonButton

Replacement for Particle's InternetButton library specific to the Photon

BetterPhotonButton

Replacement for Particle's InternetButton library specific to the Photon

Why

After reading through the code to InternetButton from Particle I wanted to fix a few things.
Instead I ended up creating a replacement.

BetterPhotonButton only works with the Photon (not the Core). The LED driver class only works with WS2812 LEDs (the ones on the InternetButton).

Features

• There is no use of the delay() function in BetterPhotonButton.

• Button presses and releases have debounce handling built in and can trigger a callback function.

• The LED/Pixel classes support animations. Write your own or use one of the 17 built in animations.

• The animations support custom color palettes.

• LEDs can be set with separate r, g, b values or with a combined value (like html colors).

• The Accelerometer class supports a callback method which is called when the InternetButton starts or stops moving. The class also provides angle, azimuth, pitch, and roll calculations. It uses a state machine when starting up to also avoid using delay().

All of the above is accomplished by an update() method on BetterPhotonButton.
Just add update(millis()) to the loop() method and BetterPhotonButton classes take care of the rest.

Usage

The below is the example code from AnimateAccel, it simply rotates a gradient color palette so color 0 stays at the top.

#include "BetterPhotonButton.h"

SYSTEM_THREAD(ENABLED);

BetterPhotonButton bb = BetterPhotonButton();
PhotonADXL362Accel *accel;

void gradientTop(PixelAnimationData *data) {
    float step = data->pixelCount - (accel->getAzimuth() / (360 / data->pixelCount));
    for (int idx = 0; idx < data->pixelCount; idx++) {
        data->pixels[idx] = data->paletteColor(((step + idx) * data->paletteCount()) / data->pixelCount);
    }
}

void setup() {
    bb.setup();
    accel = bb.startAccelerometer(1000/60);  // start accelerometer with a update rate of 60x per second
    bb.startPixelAnimation(&gradientTop, &paletteRainbow);
}

void loop() {
    bb.update(millis());
}

The key to this code being bb.setup() and bb.update(...). Every BetterPhotonButton needs to call these two for the library to function properly.

Examples

AnimateAccel

See above.

Animations

Use the buttons to cycle through a variety of sample animations.

Incrementor

Use the buttons to increment/decrement/reset which LED is lit up.

PlaySongs

Cycle through 11 'tunes' using the buttons. One tune per LED.

SimpleRainbow

The simplest BetterPhotonButton example. Simple gradiant across all the LEDs.

#include "BetterPhotonButton.h"

BetterPhotonButton bb = BetterPhotonButton();

void setup() {
    bb.setup();
    bb.rainbow(250); // cycle rainbow every 250ms (indefinitely)
}

void loop() {
    bb.update(millis());
}

The rainbow(...) function exists as an carryover from Particle's InternetButton library. All it does is call startPixelAnimation(&animation_gradient, &paletteRainbow, cycle, duration);

ToneTest

Example of playing notes while animating the LEDs

Reference

Buttons

(in progress)

Pixels (LEDs)

(in progress)

Built in Animations

These animations are just functions implmented at the bottom of BetterPhotonButton.cpp. The most complex one in this set is animation_comet and it is only 9 lines of code, so these are not complex to implement. Study these functions and the corresponding PixelAnimationData struct which has supporting functions to help you compute things relative to the current step, palette, pixel, etc.

use only first color in color palette

• animation_blink
• animation_alternating
• animation_fadeIn
• animation_fadeOut
• animation_glow

use all colors in color palette

• animation_strobe
• animation_sparkle
• animation_fader
• animation_cycle
• animation_random
• animation_increment
• animation_decrement
• animation_bounce
• animation_scanner
• animation_comet
• animation_bars
• animation_gradient

You can write your own animation functions as seen above in AnimateAccel and set the pattern of LEDs based on data (such as the accelerometer).

Another example of a custom 'animation' function is in PlaySongs with the animateCount() function which lights a single LED based on the value of the variable indicating the current selection.

Built in Color Palettes

All animations depend on a color palette to function. These palettes are simply a reference to a PixelPalette struct which wraps a count and a pointer to an array of colors (PixelColor).
There are 5 predefined palettes to help you get started.

• paletteBW -- 2: White/Black(off)
• paletteRGB -- 3: Red/Green/Blue
• paletteRYGB -- 4: Red/Yellow/Green/Blue
• paletteRYGBStripe -- 8: Red/Black/Yellow/Black/Green/Black/Blue/Black
• paletteRainbow 7: Red/Orange/Yellow/Green/Blue/Indego/Violet

Note that many animations compute the color between two colors in a palette. For example if you use the animation_gradient with the paletteBW across 11 LEDs (pixels) you will end up with with a gradient of the brightness of White to Black (off) across the 11 LEDs. This is the difference between using functions on PixelAnimationData that take and return float vs int.

Musical Notes

(in progress)

Accelerometer

(in progress)

Etc.

• It is possible to use the PhotonWS2812Pixel and Animations classes directly to support any chain of WS8212 pixel LEDs. Just use the BetterPhotonButton class as an example.
  • See BetterPhotonButton::updateAnimation and the global pixelRing specifically

License

Copyright 2017 The Brynwood Team, LLC.