Johannes Huebner's repositories
stm32-sine
Main firmware of the Huebner inverter project
inverter-hardware
Eagle schematics of inverter main board, sensor boards and gate drivers
esp8266-web-interface
Web interface for Huebner inverter
libopeninv
Generic modules that can be used in many projects
stm32-charger
Repurposes the openinverter main board as a buck or boost mode charger
stm32-island
Use openinverter hardware as an island (non-grid connected) inverter
bms-hardware
Hardware design files for Lithium BMS
stm32-template
Empty Openinverter project to start your own
libopencm3
Open source ARM Cortex-M microcontroller library
stm32-CANBootloader
Bootloader project to update for example STM32F107 / GD32F107 chips
FlyingAdcBms
16 channel BMS with 18-bit flying ADC, active and passive balancing
parameter-database
Database for openinverter parameters
Tesla-Drive-Unit
Open Source logic board for the Tesla Model S large rear drive unit. PCB Files in DesignSpark 8 format.
Tesla-Front-Drive-Unit
Open Source Logic board to control the Tesla Model S Front Drive Unit
bms-software
This repo contains the firmware for the BMS project
ccs32clara
STM32 with QCA7005 as CCS charge controller
dtsu666-Emulator
python library to emulate a dtsu666 smartmeter
prius3charger_buck
Prius Gen 3 buck/boost converter charger controller - buck mode charging
IPMMotorSim
IPM Motor Simulator for use with OpenInverter FOC build of stm32-sine
pyPLC
Electric vehicle CCS charging investigations with Python