reviewdog provides a way to post review comments to code hosting service, such as GitHub, automatically by integrating with any linter tools with ease. It uses an output of lint tools and posts them as a comment if findings are in diff of patches to review.
reviewdog also supports run in the local environment to filter an output of lint tools by diff.
- Installation
- Input Format
- Code Suggestions
- reviewdog config file
- Reporters
- Reporter: Local (-reporter=local) [default]
- Reporter: GitHub Checks (-reporter=github-pr-check)
- Reporter: GitHub Checks (-reporter=github-check)
- Reporter: GitHub PullRequest review comment (-reporter=github-pr-review)
- Reporter: GitLab MergeRequest discussions (-reporter=gitlab-mr-discussion)
- Reporter: GitLab MergeRequest commit (-reporter=gitlab-mr-commit)
- Reporter: Bitbucket Code Insights Reports (-reporter=bitbucket-code-report)
- Supported CI services
- Exit codes
- Filter mode
- Articles
# Install the latest version. (Install it into ./bin/ by default).
$ curl -sfL https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh | sh -s
# Specify installation directory ($(go env GOPATH)/bin/) and version.
$ curl -sfL https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh | sh -s -- -b $(go env GOPATH)/bin [vX.Y.Z]
# In alpine linux (as it does not come with curl by default)
$ wget -O - -q https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh | sh -s [vX.Y.Z]
You can also use nightly reviewdog release to try the latest reviewdog improvements every day!
$ curl -sfL https://raw.githubusercontent.com/reviewdog/nightly/master/install.sh | sh -s -- -b $(go env GOPATH)/bin
GitHub Action: reviewdog/action-setup
steps:
- uses: reviewdog/action-setup@v1
with:
reviewdog_version: latest # Optional. [latest,nightly,v.X.Y.Z]
You can also install reviewdog using brew:
$ brew install reviewdog/tap/reviewdog
$ brew upgrade reviewdog/tap/reviewdog
Scoop on Windows
> scoop install reviewdog
$ go install github.com/reviewdog/reviewdog/cmd/reviewdog@latest
reviewdog accepts any compiler or linter result from stdin and parses it with scan-f like 'errorformat', which is the port of Vim's errorformat feature.
For example, if the result format is {file}:{line number}:{column number}: {message}
,
errorformat should be %f:%l:%c: %m
and you can pass it as -efm
arguments.
$ golint ./...
comment_iowriter.go:11:6: exported type CommentWriter should have comment or be unexported
$ golint ./... | reviewdog -efm="%f:%l:%c: %m" -diff="git diff FETCH_HEAD"
name | description |
---|---|
%f | file name |
%l | line number |
%c | column number |
%m | error message |
%% | the single '%' character |
... | ... |
Please see reviewdog/errorformat and :h errorformat if you want to deal with a more complex output. 'errorformat' can handle more complex output like a multi-line error message.
You can also try errorformat on the Playground!
By this 'errorformat' feature, reviewdog can support any tools output with ease.
But, you don't have to write 'errorformat' in many cases. reviewdog supports pre-defined errorformat for major tools.
You can find available errorformat name by reviewdog -list
and you can use it
with -f={name}
.
$ reviewdog -list
golint linter for Go source code - https://github.com/golang/lint
govet Vet examines Go source code and reports suspicious problems - https://golang.org/cmd/vet/
sbt the interactive build tool - http://www.scala-sbt.org/
...
$ golint ./... | reviewdog -f=golint -diff="git diff FETCH_HEAD"
You can add supported pre-defined 'errorformat' by contributing to reviewdog/errorformat
reviewdog supports Reviewdog Diagnostic Format (RDFormat) as a generic diagnostic format and it supports both rdjson and rdjsonl formats.
This rdformat supports rich feature like multiline ranged comments, severity, rule code with URL, and code suggestions.
$ <linter> | <convert-to-rdjson> | reviewdog -f=rdjson -reporter=github-pr-review
# or
$ <linter> | <convert-to-rdjsonl> | reviewdog -f=rdjsonl -reporter=github-pr-review
You can use eslint-formatter-rdjson
to output rdjson
as eslint output format.
$ npm install --save-dev eslint-formatter-rdjson
$ eslint -f rdjson . | reviewdog -f=rdjson -reporter=github-pr-review
Or you can also use reviewdog/action-eslint for GitHub Actions.
reviewdog supports diff (unified format) as an input format especially useful for code suggestions. reviewdog can integrate with any code suggestions tools or formatters to report suggestions.
-f.diff.strip
: option for -f=diff
: strip NUM leading components from diff file names (equivalent to 'patch -p') (default is 1 for git diff) (default 1)
$ <any-code-fixer/formatter> # e.g. eslint --fix, gofmt
$ TMPFILE=$(mktemp)
$ git diff >"${TMPFILE}"
$ git stash -u && git stash drop
$ reviewdog -f=diff -f.diff.strip=1 -reporter=github-pr-review < "${TMPFILE}"
Or you can also use reviewdog/action-suggester for GitHub Actions.
If diagnostic tools support diff output format, you can pipe the diff directly.
$ gofmt -s -d . | reviewdog -name="gofmt" -f=diff -f.diff.strip=0 -reporter=github-pr-review
$ shellcheck -f diff $(shfmt -f .) | reviewdog -f=diff
reviewdog also accepts checkstyle XML format as well. If the linter supports checkstyle format as a report format, you can use -f=checkstyle instead of using 'errorformat'.
# Local
$ eslint -f checkstyle . | reviewdog -f=checkstyle -diff="git diff"
# CI (overwrite tool name which is shown in review comment by -name arg)
$ eslint -f checkstyle . | reviewdog -f=checkstyle -name="eslint" -reporter=github-check
Also, if you want to pass other Json/XML/etc... format to reviewdog, you can write a converter.
$ <linter> | <convert-to-checkstyle> | reviewdog -f=checkstyle -name="<linter>" -reporter=github-pr-check
reviewdog supports code suggestions feature with rdformat or diff input. You can also use reviewdog/action-suggester for GitHub Actions.
reviewdog can suggest code changes along with diagnostic results if a diagnostic tools supports code suggestions data. You can integrate reviewdog with any code fixing tools and any code formatter with diff input as well.
Note that not all reporters provide support of code suggestion.
-reporter |
Suggestion support |
---|---|
local |
NO [1] |
github-check |
NO [2] |
github-pr-check |
NO [2] |
github-pr-review |
OK |
gitlab-mr-discussion |
NO [1] |
gitlab-mr-commit |
NO [2] |
gerrit-change-review |
NO [1] |
bitbucket-code-report |
NO [2] |
- [1] The reporter service support code suggestion feature, but reviewdog does not support it yet. See #678 for the status.
- [2] The reporter service itself doesn't support code suggestion feature.
reviewdog can also be controlled via the .reviewdog.yml configuration file instead of "-f" or "-efm" arguments.
With .reviewdog.yml, you can run the same commands both CI service and local environment including editor integration with ease.
runner:
<tool-name>:
cmd: <command> # (required)
errorformat: # (optional if you use `format`)
- <list of errorformat>
format: <format-name> # (optional if you use `errorformat`. e.g. golint,rdjson,rdjsonl)
name: <tool-name> # (optional. you can overwrite <tool-name> defined by runner key)
level: <level> # (optional. same as -level flag. [info,warning,error])
# examples
golint:
cmd: golint ./...
errorformat:
- "%f:%l:%c: %m"
level: warning
govet:
cmd: go vet -all .
format: govet
your-awesome-linter:
cmd: awesome-linter run
format: rdjson
name: AwesomeLinter
$ reviewdog -diff="git diff FETCH_HEAD"
project/run_test.go:61:28: [golint] error strings should not end with punctuation
project/run.go:57:18: [errcheck] defer os.Setenv(name, os.Getenv(name))
project/run.go:58:12: [errcheck] os.Setenv(name, "")
# You can use -runners to run only specified runners.
$ reviewdog -diff="git diff FETCH_HEAD" -runners=golint,govet
project/run_test.go:61:28: [golint] error strings should not end with punctuation
# You can use -conf to specify config file path.
$ reviewdog -conf=./.reviewdog.yml -reporter=github-pr-check
Output format for project config based run is one of the following formats.
<file>: [<tool name>] <message>
<file>:<lnum>: [<tool name>] <message>
<file>:<lnum>:<col>: [<tool name>] <message>
reviewdog can report results both in local environment and review services as continuous integration.
reviewdog can find newly introduced findings by filtering linter results
using diff. You can pass diff command as -diff
arg.
$ golint ./... | reviewdog -f=golint -diff="git diff FETCH_HEAD"
github-pr-check reporter reports results to GitHub Checks.
You can change report level for this reporter by level
field in config
file or -level
flag. You can control GitHub status
check result with this feature. (default: error)
Level | GitHub Status |
---|---|
info |
neutral |
warning |
neutral |
error |
failure |
There are two options to use this reporter.
Example: .github/workflows/reviewdog.yml
- name: Run reviewdog
env:
REVIEWDOG_GITHUB_API_TOKEN: ${{ secrets.GITHUB_TOKEN }}
run: |
golint ./... | reviewdog -f=golint -reporter=github-pr-check
See GitHub Actions section too. You can also use public reviewdog GitHub Actions.
reviewdog CLI send a request to reviewdog GitHub App server and the server post results as GitHub Checks, because Check API only supported for GitHub App and GitHub Actions.
- Install reviewdog Apps. https://github.com/apps/reviewdog
- Set
REVIEWDOG_TOKEN
or run reviewdog CLI in trusted CI providers.
- Get token from
https://reviewdog.app/gh/{owner}/{repo-name}
.
$ export REVIEWDOG_TOKEN="<token>"
$ reviewdog -reporter=github-pr-check
Note: Token is not required if you run reviewdog in Travis or AppVeyor.
Caution
As described above, github-pr-check reporter with Option 2 depends on reviewdog GitHub App server. The server is running with haya14busa's pocket money for now and I may break things, so I cannot ensure that the server is running 24h and 365 days.
UPDATE: Started getting support by opencollective and GitHub sponsor. See Supporting reviewdog
You can use github-pr-review reporter or use run reviewdog under GitHub Actions if you don't want to depend on reviewdog server.
It's basically same as -reporter=github-pr-check
except it works not only for
Pull Request but also for commit.
You can create reviewdog badge for this reporter.
github-pr-review reporter reports results to GitHub PullRequest review comments using GitHub Personal API Access Token. GitHub Enterprise is supported too.
- Go to https://github.com/settings/tokens and generate new API token.
- Check
repo
for private repositories orpublic_repo
for public repositories.
$ export REVIEWDOG_GITHUB_API_TOKEN="<token>"
$ reviewdog -reporter=github-pr-review
For GitHub Enterprise, set API endpoint by environment variable.
$ export GITHUB_API="https://example.githubenterprise.com/api/v3/"
$ export REVIEWDOG_INSECURE_SKIP_VERIFY=true # set this as you need to skip verifying SSL
See GitHub Actions section too if you can use GitHub Actions. You can also use public reviewdog GitHub Actions.
Required GitLab version: >= v10.8.0
gitlab-mr-discussion reporter reports results to GitLab MergeRequest discussions using
GitLab Personal API Access token.
Get the token with api
scope from https://gitlab.com/profile/personal_access_tokens.
$ export REVIEWDOG_GITLAB_API_TOKEN="<token>"
$ reviewdog -reporter=gitlab-mr-discussion
The CI_API_V4_URL
environment variable, defined automatically by Gitlab CI (v11.7 onwards), will be used to find out the Gitlab API URL.
Alternatively, GITLAB_API
can also be defined, in which case it will take precedence over CI_API_V4_URL
.
$ export GITLAB_API="https://example.gitlab.com/api/v4"
$ export REVIEWDOG_INSECURE_SKIP_VERIFY=true # set this as you need to skip verifying SSL
gitlab-mr-commit is similar to gitlab-mr-discussion reporter but reports results to each commit in GitLab MergeRequest.
gitlab-mr-discussion is recommended, but you can use gitlab-mr-commit reporter if your GitLab version is under v10.8.0.
$ export REVIEWDOG_GITLAB_API_TOKEN="<token>"
$ reviewdog -reporter=gitlab-mr-commit
gerrit-change-review reporter reports result to Gerrit Change using Gerrit Rest APIs.
The reporter supports Basic Authentication and Git-cookie based authentication for reporting results.
Set GERRIT_USERNAME
and GERRIT_PASSWORD
environment variables for basic authentication, and put GIT_GITCOOKIE_PATH
for git cookie based authentication.
$ export GERRIT_CHANGE_ID=changeID
$ export GERRIT_REVISION_ID=revisionID
$ export GERRIT_BRANCH=master
$ export GERRIT_ADDRESS=http://<gerrit-host>:<gerrit-port>
$ reviewdog -reporter=gerrit-change-review
bitbucket-code-report generates the annotated Bitbucket Code Insights report.
For now, only the no-filter
mode supported, so the whole project is scanned on every run.
Reports are stored per commit and can be viewed per commit from Bitbucket Pipelines UI or
in Pull Request. In the Pull Request UI affected code lines will be annotated in the diff,
as well as you will be able to filter the annotations by This pull request or All.
If running from Bitbucket Pipelines, no additional configuration is needed (even credentials). If running locally or from some other CI system you would need to provide Bitbucket API credentials:
- For Basic Auth you need to set following env variables:
BITBUCKET_USER
andBITBUCKET_PASSWORD
- For AccessToken Auth you need to set
BITBUCKET_ACCESS_TOKEN
$ export BITBUCKET_USER="my_user"
$ export BITBUCKET_PASSWORD="my_password"
$ reviewdog -reporter=bitbucket-code-report
To post report to Bitbucket Server use BITBUCKET_SERVER_URL
variable:
$ export BITBUCKET_USER="my_user"
$ export BITBUCKET_PASSWORD="my_password"
$ export BITBUCKET_SERVER_URL="https://bitbucket.my-company.com"
$ reviewdog -reporter=bitbucket-code-report
Example: .github/workflows/reviewdog.yml
name: reviewdog
on: [pull_request]
jobs:
reviewdog:
name: reviewdog
runs-on: ubuntu-latest
steps:
# ...
- uses: reviewdog/action-setup@v1
with:
reviewdog_version: latest # Optional. [latest,nightly,v.X.Y.Z]
- name: Run reviewdog
env:
REVIEWDOG_GITHUB_API_TOKEN: ${{ secrets.GITHUB_TOKEN }}
run: |
reviewdog -reporter=github-pr-check -runners=golint,govet
# or
reviewdog -reporter=github-pr-review -runners=golint,govet
Example (github-check reporter):
Only github-check
reporter can run on push event too.
name: reviewdog (github-check)
on:
push:
branches:
- master
pull_request:
jobs:
reviewdog:
name: reviewdog
runs-on: ubuntu-latest
steps:
# ...
- name: Run reviewdog
env:
REVIEWDOG_GITHUB_API_TOKEN: ${{ secrets.GITHUB_TOKEN }}
run: |
reviewdog -reporter=github-check -runners=golint,govet
You can use public GitHub Actions to start using reviewdog with ease! π
- Common
- Text (e.g. Markdown)
- reviewdog/action-alex - Run alex which catches insensitive, inconsiderate writing. (e.g. master/slave)
- reviewdog/action-languagetool - Run languagetool.
- tsuyoshicho/action-textlint - Run textlint
- tsuyoshicho/action-redpen - Run redpen
- Docker
- reviewdog/action-hadolint - Run hadolint to lint
Dockerfile
.
- reviewdog/action-hadolint - Run hadolint to lint
- Env
- dotenv-linter/action-dotenv-linter - Run dotenv-linter to lint
.env
files.
- dotenv-linter/action-dotenv-linter - Run dotenv-linter to lint
- Shell script
- reviewdog/action-shellcheck - Run shellcheck.
- reviewdog/action-shfmt - Run shfmt.
- Go
- reviewdog/action-staticcheck - Run staticcheck.
- reviewdog/action-golangci-lint - Run golangci-lint and supported linters individually by golangci-lint.
- JavaScript
- reviewdog/action-eslint - Run eslint.
- TypeScript
- EPMatt/reviewdog-action-tsc - Run tsc.
- CSS
- Vim script
- reviewdog/action-vint - Run vint.
- tsuyoshicho/action-vimlint - Run vim-vimlint
- Terraform
- reviewdog/action-tflint - Run tflint.
- YAML
- Ruby
- reviewdog/action-brakeman - Run brakeman.
- reviewdog/action-reek - Run reek.
- reviewdog/action-rubocop - Run rubocop.
- vk26/action-fasterer - Run fasterer.
- SennaLabs/action-standardrb - Run standardrb.
- tk0miya/action-erblint - Run erb-lint
- blooper05/action-rails_best_practices - Run rails_best_practices
- tomferreira/action-bundler-audit - Run bundler-audit
- Python
- wemake-python-styleguide - Run wemake-python-styleguide
- tsuyoshicho/action-mypy - Run mypy
- jordemort/action-pyright - Run pyright
- dciborow/action-pylint - Run pylint
- reviewdog/action-black - Run black
- Kotlin
- ScaCap/action-ktlint - Run ktlint.
- Android Lint
- Ansible
- GitHub Actions
... and more on GitHub Marketplace.
Missing actions? Check out reviewdog/action-template and create a new reviewdog action!
Please open a Pull Request to add your created reviewdog actions here β¨. I can also put your repositories under reviewdog org and co-maintain the actions. Example: action-tflint.
GITHUB_TOKEN
for Pull Requests from forked repository doesn't have write
access to Check API nor Review API due to GitHub Actions
restriction.
Instead, reviewdog uses Logging commands of GitHub
Actions
to post results as
annotations
similar to github-pr-check
reporter.
Note that there is a limitation for annotations created by logging commands, such as max # of annotations per run. You can check GitHub Actions log to see full results in such cases.
As github-check
reporter support running on commit, we can create reviewdog
GitHub Action badge
to check the result against master commit for example. π
Example:
<!-- Replace <OWNER> and <REPOSITORY>. It assumes workflow name is "reviewdog" -->
[![reviewdog](https://github.com/<OWNER>/<REPOSITORY>/workflows/reviewdog/badge.svg?branch=master&event=push)](https://github.com/<OWNER>/<REPOSITORY>/actions?query=workflow%3Areviewdog+event%3Apush+branch%3Amaster)
If you use -reporter=github-pr-check in Travis CI, you don't need to set REVIEWDOG_TOKEN
.
Example:
install:
- mkdir -p ~/bin/ && export PATH="~/bin/:$PATH"
- curl -sfL https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh| sh -s -- -b ~/bin
script:
- reviewdog -conf=.reviewdog.yml -reporter=github-pr-check
Store GitHub API token by travis encryption keys.
$ gem install travis
$ travis encrypt REVIEWDOG_GITHUB_API_TOKEN=<token> --add env.global
Example:
env:
global:
- secure: <token>
install:
- mkdir -p ~/bin/ && export PATH="~/bin/:$PATH"
- curl -sfL https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh| sh -s -- -b ~/bin
script:
- >-
golint ./... | reviewdog -f=golint -reporter=github-pr-review
Examples
Store REVIEWDOG_GITHUB_API_TOKEN
(or REVIEWDOG_TOKEN
for github-pr-check) in
Environment variables - CircleCI
version: 2
jobs:
build:
docker:
- image: golang:latest
steps:
- checkout
- run: curl -sfL https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh| sh -s -- -b ./bin
- run: go vet ./... 2>&1 | ./bin/reviewdog -f=govet -reporter=github-pr-review
# Deprecated: prefer GitHub Actions to use github-pr-check reporter.
- run: go vet ./... 2>&1 | ./bin/reviewdog -f=govet -reporter=github-pr-check
Store REVIEWDOG_GITLAB_API_TOKEN
in GitLab CI variable.
reviewdog:
script:
- reviewdog -reporter=gitlab-mr-discussion
# Or
- reviewdog -reporter=gitlab-mr-commit
No additional configuration is needed.
pipelines:
default:
- step:
name: Reviewdog
image: golangci/golangci-lint:v1.31-alpine
script:
- wget -O - -q https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh |
sh -s -- -b $(go env GOPATH)/bin
- golangci-lint run --out-format=line-number ./... | reviewdog -f=golangci-lint -reporter=bitbucket-code-report
You can use reviewdog to post review comments from anywhere with following environment variables.
name | description |
---|---|
CI_PULL_REQUEST |
Pull Request number (e.g. 14) |
CI_COMMIT |
SHA1 for the current build |
CI_REPO_OWNER |
repository owner (e.g. "haya14busa" for https://github.com/haya14busa/reviewdog) |
CI_REPO_NAME |
repository name (e.g. "reviewdog" for https://github.com/haya14busa/reviewdog) |
CI_BRANCH |
[optional] branch of the commit |
$ export CI_PULL_REQUEST=14
$ export CI_REPO_OWNER=haya14busa
$ export CI_REPO_NAME=reviewdog
$ export CI_COMMIT=$(git rev-parse HEAD)
and set a token if required.
$ REVIEWDOG_TOKEN="<token>"
$ REVIEWDOG_GITHUB_API_TOKEN="<token>"
$ REVIEWDOG_GITLAB_API_TOKEN="<token>"
If a CI service doesn't provide information such as Pull Request ID - reviewdog can guess it by branch name and commit SHA.
Just pass the flag guess
:
$ reviewdog -conf=.reviewdog.yml -reporter=github-pr-check -guess
- GitHub pull request builder plugin - Jenkins - Jenkins Wiki
- Configuring a GitHub app account - Jenkins - CloudBees - required to use github-pr-check formatter without reviewdog server or GitHub actions.
$ export CI_PULL_REQUEST=${ghprbPullId}
$ export CI_REPO_OWNER=haya14busa
$ export CI_REPO_NAME=reviewdog
$ export CI_COMMIT=${ghprbActualCommit}
$ export REVIEWDOG_INSECURE_SKIP_VERIFY=true # set this as you need
# To submit via reviewdog server using github-pr-check reporter
$ REVIEWDOG_TOKEN="<token>" reviewdog -reporter=github-pr-check
# Or, to submit directly via API using github-pr-review reporter
$ REVIEWDOG_GITHUB_API_TOKEN="<token>" reviewdog -reporter=github-pr-review
# Or, to submit directly via API using github-pr-check reporter (requires GitHub App Account configured)
$ REVIEWDOG_SKIP_DOGHOUSE=true REVIEWDOG_GITHUB_API_TOKEN="<token>" reviewdog -reporter=github-pr-check
By default reviewdog will return 0
as exit code even if it finds errors.
If -fail-on-error
flag is passed, reviewdog exits with 1
when at least one error was found/reported.
This can be helpful when you are using it as a step in your CI pipeline and want to mark the step failed if any error found by linter.
See also -level
flag for github-pr-check/github-check reporters.
reviewdog will exit with 1
if reported check status is failure
as well if -fail-on-error=true
.
reviewdog filter results by diff and you can control how reviewdog filter results by -filter-mode
flag.
Available filter modes are as below.
Filter results by added/modified lines.
Filter results by diff context. i.e. changed lines +-N lines (N=3 for example).
Filter results by added/modified file. i.e. reviewdog will report results as long as they are in added/modified file even if the results are not in actual diff.
Do not filter any results. Useful for posting results as comments as much as possible and check other results in console at the same time.
-fail-on-error
also works with any filter-mode and can catch all results from any linters with nofilter
mode.
Example:
$ reviewdog -reporter=github-pr-review -filter-mode=nofilter -fail-on-error
Note that not all reporters provide full support of filter mode due to API limitation.
e.g. github-pr-review
reporter uses GitHub Review
API but it doesn't support posting comment outside diff (diff_context
),
so reviewdog will use Check annotation as fallback to post those comments [1].
-reporter \ -filter-mode |
added |
diff_context |
file |
nofilter |
---|---|---|---|---|
local |
OK | OK | OK | OK |
github-check |
OK | OK | OK | OK |
github-pr-check |
OK | OK | OK | OK |
github-pr-review |
OK | OK | Partially Supported [1] | Partially Supported [1] |
gitlab-mr-discussion |
OK | OK | OK | Partially Supported [2] |
gitlab-mr-commit |
OK | Partially Supported [2] | Partially Supported [2] | Partially Supported [2] |
gerrit-change-review |
OK | OK? [3] | OK? [3] | Partially Supported? [2][3] |
bitbucket-code-report |
NO [4] | NO [4] | NO [4] | OK |
- [1] Report results which is outside diff context with Check annotation as fallback if it's running in GitHub actions instead of Review API (comments). All results will be reported to console as well.
- [2] Report results which is outside diff file to console.
- [3] It should work, but not verified yet.
- [4] Not implemented at the moment
Use the -tee
flag to show debug info.
reviewdog -filter-mode=nofilter -tee
- reviewdog β A code review dog who keeps your codebase healthy
- reviewdog β‘ GitHub Check β improved automated review experience
- Automated Code Review on GitHub Actions with reviewdog for any languages/tools
- GitHub Actions to guard your workflow
Become GitHub Sponsor for each contributor or become a backer or sponsor from opencollective.