joshualambert / TiDraggable

An enhanced fork of the original TiDraggable module by Pedro Enrique, allows for simple creation of "draggable" views.

TiDraggable - Native Draggable Views

Create draggable views.

History

The original module was done by Pedro Enrique, but is not maintained anymore. Then Seth Benjamin enhanced it, but also seems to have abandoned it. This new fork was sponsored by Fokke Zandbergen and adds new features to the iOS version and updated it to 64-bit.

See Changelog for details.

Usage

See the (iOS) example for a demo.

var Draggable = require('ti.draggable');
var draggableView = Draggable.createView({
    width : 100,
    height : 100,
    backgroundColor : 'black',
    draggableConfig: {
        enabled: false,
        enabledOnLongpress: true,
        showShadowOnMove: true
    }
});

Creating draggable views

To create a draggable view use the modules' createView() method. All of Titanium's properties for a view are supported along the additional draggableConfig property containing any options that should be set upon creation. See Options

When the draggable proxy is created a new property is set called draggable which stores all the configuration properties and allows for options to be updated after creation.

Other types of views

iOS ONLY: You can call almost all of the Ti.UI factory methods on the module, such as createWindow( ... ). Only createView() and createWindow() are officially supported. Other APIs haven't been fully tested.

Options

Options can be set on view creation using draggableConfig or after creation using DraggableView.draggable.setConfig( ... )

The setConfig method can set options two different ways. You can pass an object containing the parameters you with to set or you can pass a key-value pair.

Setting Options With An Object

DraggableView.draggable.setConfig('enabled', false);

Setting Options With An Object

DraggableView.draggable.setConfig({
  enabled : false
});

Boolean - enabled

Flag to enable or disable dragging.

Boolean - enableOnLongpress

iOS ONLY: Flag to enable or disable dragging after a longpress on the view.

Boolean - showShadowOnMove

iOS ONLY: Flag to enable or disable showing a shadow while the view is being moved.

Number - minLeft

The left-most boundary of the view being dragged. Can be set to null to disable property.

Number - maxLeft

The right-most boundary of the view being dragged. Can be set to null to disable property.

Number - minTop

The top-most boundary of the view being dragged. Can be set to null to disable property.

Number - maxTop

The bottom-most boundary of the view being dragged. Can be set to null to disable property.

Boolean - ensureRight

Ensure that that the right edge of the view being dragged keeps its integrity. Can be set to null to disable property.

Boolean - ensureBottom

Ensure that that the bottom edge of the view being dragged keeps its integrity. Can be set to null to disable property.

Array - maps

An array of views that should be translated along with the view being dragged. See View Mapping.

Events

Draggable views emit the following events.

iOS ONLY: Only on iOS, you can also listen to these same events on the module instead of the views created. Look at the event's source property to see what view is being dragged.

start

Fires when the view starts dragging, passing:

• center.x, center.y - The coordinates of the center of the view.
• left, top - The coordinates of the left top of the view.
• source - The view being dragged

move

Fires when the view changes position, passing:

• center.x, center.y - The coordinates of the center of the view.
• left, top - The coordinates of the left top of the view.
• source - The view being dragged
• velocity.x, velocity.y - The velocity of the view.

end

Fires when the drag ends, passing:

• center.x, center.y - The coordinates of the center of the view.
• left, top - The coordinates of the left top of the view.
• source - The view being dragged
• distance.x, distance.y - The distance the view was dragged over.

cancel

Fires when the drag is interupted by an incoming call for example.

View Mapping

In the case where you want multiple views to be translated at the same time you can pass the maps property to the draggable config. This functionality is useful for creating parallax or 1:1 movements.

The maps property accepts an array of objects containing any of the following. The view property is required.

Map Options

Ti.UI.View - view

The view to translate.

Number - parallaxAmount

A positive or negative number. Numbers less than |1| such as 0.1, 0.2, or 0.3 will cause the translation to move faster then the translation. A parallaxAmount of 1 will translate mapped views 1:1. A parallaxAmount > 1 will result in a slower translation.

Object - constrain

An object containing the boundaries of the mapped view. Can have the following:

• x
  • start The start position for the mapped view.
  • end The end position for the mapped view.
  • callback A function that will receive the completed percentage of the mapped translation. . Android does not support this option.
  • fromCenter Translate the view from its center. Android does not support this option.
• y
  • start The start position for the mapped view.
  • end The end position for the mapped view.
  • callback A function that will receive the completed percentage of the mapped translation. . Android does not support this option.
  • fromCenter Translate the view from its center. Android does not support this option.

Changelog

• Additions in this fork:
  • iOS: Added listening to events of all draggable views via the module.
  • iOS: Added enableOnLongpress and showShadowOnMove.
  • iOS: Updated to 64-bit.
• Enhancements by Seth Benjamin:
  • Improved drag performance for iOS and Android.
  • Updated public APIs for more seamless integration.
  • Removed the InfiniteScroll class as it doesn't really have much to do with the overall module.
  • Removed unnecessary APIs to reduce overall module footprint.
  • Removed unused variables and organized imports.
  • Added ability to unset boundaries.
  • Mapped the missing cancel gesture to the end gesture (firing the respective event).
  • Added ensureRight and ensureBottom, this allows for stable dragging of views where the dimensions are not known.
  • Added enabled boolean property for toggeling drag
  • Views can be mapped and translated with a draggable view.
  • Draggable implementation now has its own configurable property called draggable.
  • iOS: Supports all Ti.UI.View subclasses and Ti.UI.View wrapped views (View, Window, Label)
  • Android: Fixed a bug where touch events were not correctly passed to children or bubbled to the parent.
  • Android: Fixed a bug where min and max bounds were being incorrectly reported after being set.
  • Android: Improved drag tracking. It plays nice with child views now.
  • Android: Added a touch threshold to ensure all child views have a chance to have their respective events fired.
• Original version by Pedro Enrique

Building the module yourself

If you are building the Android module, make sure you update the .classpath and build.properties files to match your setup.