jorgelserve / Marlin-ToAuto

Firmware Marlin para Artillery A1.1 de ToAuto

Este proyecto contiene las configuraciones necesarias para el firmware Marlin 2.1.2.1 para las impresoras Artillery A1.1 de ToAuto

Los cambios realizados son los siguientes:

Configuration.h

#define MOTHERBOARD BOARD_MKS_ROBIN_NANO
#define SERIAL_PORT 3
#define BAUDRATE 115200
#define X_DRIVER_TYPE TMC2208_STANDALONE
#define Y_DRIVER_TYPE TMC2208_STANDALONE
#define Z_DRIVER_TYPE A4988
#define Z2_DRIVER_TYPE A4988
#define TEMP_SENSOR_BED 1
#define DEFAULT_Kp 22.52
#define DEFAULT_Ki 2.07
#define DEFAULT_Kd 61.26
#define PIDTEMPBED
#define DEFAULT_bedKp 77.87
#define DEFAULT_bedKi 14.98
#define DEFAULT_bedKd 269.96
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 406.76 }
#define DEFAULT_MAX_FEEDRATE { 100, 100, 12, 120 }
#define DEFAULT_MAX_ACCELERATION { 960, 960, 200, 5000 
#define DEFAULT_ACCELERATION 1000
#define DEFAULT_RETRACT_ACCELERATION 1000
#define DEFAULT_TRAVEL_ACCELERATION 1000
#define CLASSIC_JERK
#define DEFAULT_XJERK 20.0
#define DEFAULT_YJERK 20.0
#define DEFAULT_ZJERK  0.4
#define S_CURVE_ACCELERATION
#define PROBE_MANUALLY
#define DISABLE_X true
#define DISABLE_Y true
#define INVERT_X_DIR true
#define INVERT_Y_DIR false
#define INVERT_Z_DIR true
#define INVERT_E0_DIR true
#define Z_HOMING_HEIGHT  5
#define Z_AFTER_HOMING  5
#define X_BED_SIZE 300
#define Y_BED_SIZE 280
#define Z_MAX_POS 40
#define FILAMENT_RUNOUT_SENSOR
#define MESH_BED_LEVELING
#define PREHEAT_BEFORE_LEVELING // To be removed
#define LCD_BED_LEVELING
#define LCD_BED_TRAMMING
#define NOZZLE_PARK_FEATURE
#define LCD_LANGUAGE es
#define SDSUPPORT
#define MKS_ROBIN_TFT35
#define TFT_COLOR_UI
#define TOUCH_SCREEN
#define TOUCH_IDLE_SLEEP_MINS 5
//#define TOUCH_SCREEN_CALIBRATION
#define TOUCH_CALIBRATION_X   16976
#define TOUCH_CALIBRATION_Y   -11527
#define TOUCH_OFFSET_X        -28
#define TOUCH_OFFSET_Y        339
#define TOUCH_ORIENTATION     TOUCH_LANDSCAPE

Configuration_adv.h

#define EMERGENCY_PARSER
#define ADVANCED_PAUSE_FEATURE

platformio.ini

default_envs = mks_robin_nano_v1v2

Marlin/config.ini

monitor_speed     = 115200

---

Hardware settings

Axis	X	Y	Z1	E0	Z2
Current	1	1	0.8	0.8	0.8
Driver	TCM2208	TCM2208	A4988	A4988	A4988
Vref	1	1	?	?	?

Autor: @jorgelserve